Question about 2004 Dodge Durango

3 Answers

How do i change the headlight bulb in a 2004 durango?

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

I know you posted awhile ago, but I hope maybe this could still help you. If you have a 2004 Durango it it second generation and I wouldn't recommend removing the entire assembly. Turn your wheel one way and then inside the wheel well is a plastic door you slide up and then out and you can reach right into the back of the headlight assembly. Turn the wheel and go to the other side. It's a pain, but it's a lot easier.

Posted on May 01, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

There are two methods. 1.) It is possible to maneuver your hand to the lock ring on each headlight assemble from inside the engine compartment. You must work "blind" -- by feel only. The lock ring rotates 1/4 turn to unlock. On the side of the engine with the battery, you must remove the front portion of the plastic battery box. 2.) This method is much easier. Three bolts (one at the top, two on the bottom) that hold the headlight assembly to the vehicle. Look directly at theheadlight, and look in the gap between the top of the headlight and the vehicle fender, and also at the gap between the bottom of the headlight and the vehicle bumper. With the aid of a light, you should be able to see all three bolts. Using a socket and an extension to your ratchet, remove the bolts, pull out the headlight assembly, and remove the lock ring. TAKE CARE TO HANDLE THE HEADLIGHT ASSEMBLY GENTLY so as to not alter the setting of the headlight in respect to the headlight frame. By taking care, it will not be necessary to have the headlight(s) adjusted.

Posted on Dec 09, 2009

Testimonial: "Thank you so much! The engine compartment to the light assembly in my Durango is sealed- there is no place for me to reach in- so method 2 will work! "

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Open up your hood, reach in behind headlight, Find and turn the plastic ring that holds on the wire harness and headlight. Turn counter-clockwise and pull back out of the way. Then grab the bulb and harness, turn counter-clockwise and remove it as well. Then remove wiring harness from bulb, replace, and reverse procedures.

Posted on Dec 09, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Changing the bulb for a headlight

I guess you refer to the dipped beam headlamp?
If the light is a normal one, not the fancy expensive bright lamp, bluish colour light emitted you should be able to reach it throgh the wheelarch after removing part of the plastic trim.
The cover rotates and can be easily removed.
The there is the usual wire spring loop that hold the lamp in.
The lamp in mine was a standard H1 single filament bulb.
Took about 20 minutes to replace in semi darkness with the aid of a wind-up torch!

Hope this helps.

Paul H.

Posted on May 07, 2009

j_del
  • 1586 Answers

SOURCE: head light bulb replacement

Open the hood. Look at the top edge of the headlight. About 1/3 to 1/4 of the way in from the inner edge of the housing, you'll see a rectangular clip, and about 10" outboard of that clip, you'll see a matching one. Simply pull up on those clips - they're slide locks for the headlight housing. Once you pull them up, you'll be able to pull the whole headlight housing out towards you, and from there, you can unclip and remove the bulb sockets in question.

Posted on Aug 25, 2008

  • 345 Answers

SOURCE: How do I change the passenger side headlight bulb on my 2004 Beetle Conv.

there is a little lever at the back of the headlight just to one side,lift it up and gentle pull the light.this lever is black and can be very tight oil the slides well before you put it back in

Posted on Oct 09, 2008

  • 347 Answers

SOURCE: change headlight bulb in Toyota Camry 2004

there is a bulb housing behind the lens. remove it and the bulb.

Posted on Sep 18, 2009

  • 1986 Answers

SOURCE: replacing my headlight bulb in my kia amanit 2004

  1. Open the hood of your KIA Amanti and look behind the headlight that has gone out. Locate the round knob on the back of the headlight.
  2. Turn the knob counterclockwise 1/4 of a turn and gently remove it from the back of the headlight. Carefully remove the electrical cable within the headlight housing that is attached to the back of the headlight bulb.
  3. Locate the metal clip that holds the light bulb in place by pushing the clip arm straight in and sliding it down. Remove the bulb from the headlight housing.
  4. Replace the old headlight bulb with new bulb. Secure it by sliding the metal clip up to hold the bulb in place. Reattach the electrical cable and replace the round knob to the back of the headlight housing.
  5. Turn on the headlights to verify that they are in working order.

Posted on Nov 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Dodge Durango SLT, How do I change the parking light bulb on the passengers side front


I searched for an article that can help you on how to replace Bulb in a Dodge Durango. Visit this article.

-
Smittybilt Products and Accessories

Mar 17, 2013 | 2005 Dodge Durango

1 Answer

Change the headlight bulb


You will need to reach in behind the light and release the locking collar and then pull the light bulb assembly out of the housing and replace the bulb then lock it back down. It gets pretty tight in that area but should be able to be done with a minimum of of other parts like the air box or hose having to be removed.

Aug 31, 2011 | 2004 Dodge Durango

1 Answer

What kind of headlight bulbs are used for this type of vehicle? or what type?


2004 DODGE Durango
High & low beam headlamp
H13 (9008)
H13ST SilverStar: The brighter and whiter light. Up to 35% brighter, up to 30% more downroad visibility and up to 35% more sideroad visibility.
H13XV XtraVision: The brighter light for upgraded performance. Up to 30% brighter light and up to 25% more downroad visibility.

Mar 10, 2011 | 2004 Dodge Durango

1 Answer

What is easiest way to change out headlight bulbs in 2004 Dodge Caravan


Open the hood. Discount the neg. battery cable.Theres 3 screws right on top of the light assembly. Remove these screws to remove the headlight. To remove the bulb from the headlight assembly rotate the blub retaining ring counterclockwise. don't touch the new blub when installing. Make sure all 3 tabs go into there slots on the retaining ring when installing the new blub

Jan 24, 2010 | 2004 Dodge Durango

1 Answer

How to change the headlight bulb on a 2001 dodge durango


you should be able to twist and pull the bulb housing from behinde the headlight under the hood

Dec 14, 2009 | 2001 Dodge Durango

1 Answer

Headlights 2001 Dodge Durango


headlight cover does not have to be removed. Open your hood and reach in to the back of the headlight assembly grasp the main headlight plug and pull while turning counter clockwise. the bulb should come out with the plug, the bulb will then unclip from the plug, good luck

Mar 01, 2009 | 2001 Dodge Durango

2 Answers

License plate bulb


how to replace the Dodge durango 2004 number plate light

Jan 20, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
2004 Dodge Durango Logo

1,148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...