At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fuse-Box.infohttps://fuse-box.info > Home > Chevrolet
Fuse box diagram (location and assignment of electrical fuses and relays) for Chevrolet (Chevy) Astro (1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ...
According to this it is a know issue and the gauge has a reset procedure.
How do you reset the fuel gauge on a Chevy Suburban?
Press and hold the "Trip/Odo" button. Turn the ignition switch on and hold the "Trip/Odo" switch for about two seconds. Then, release the "Trip/Odo" button, press it again (do this three or four times), and finally hold it for about four to five seconds until the leveling information shows on the Odometer.Jun. 19, 2021
Water in the oil is sign that head gasket has blown or head or block has cracked. Either way, very bad indeed. Engine will need major repairs or replacement.
Any competent shop will tell you the same thing. You either have a leaking intake or head gasket. Testing will give the shop the information they need to make a repair recommendation. First test should be a hydrocarbon test of the cooling system. If they find hydrocarbons there you can safely assume it's a head gasket in which case the intake gaskets are replaced during the job and become a non-issue. A cooling system pressure test, followed by a cylinder leakdown test may be necessary if the hydrocarbon test is inconclusive. Personally, I'd just do the head gaskets and not waste too many $ on testing that could go towards the actual work..
No. The engine will still start, however if the sending unit is not working you will have no oil pressure and you will damage the motor and possibly lock it up. This vehicle can run with the unit not working correctly
easy. you have a vacuum leak at the intake manifold. spray some lubricant along the gasket at 5 & 7. should stop missing if leak is on the outside. but if on inside it wouldn't make a difference. I vote to change the intake gasket. I'm having to do the same with a astro van.
×