At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I need to know if the rear bearing on a 1994 lexus ls...
The bearing is a one piece bearing that has to be slammed out of the axle housing with a slide hammer,after removing the axle,4 bolts hold the axle in.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the wheel bearing requires adjustment. Remove the wheel trim and the hub dust cap. Take out the split pin and tighten the slotted nut using only enough force to take up the slack. Back it off and re-tighten spinning the wheel to seat the bearing. DO not tighten it beyong a light wrist movement Afer feeling for looseness, fit a new split pin and replace dust cap and wheel trim.
hi i take it u mean wheel bearings first jack and block the car up removing the tyre you will find a centre nut remove this your bearing is behind it if removeing it you will need to hire a withdrawing tool
sometimes it is possible but they are glued in really well so might take quite alot of effort. remember to use jb weld or equivalant when you put the new bearing back in if it comes out while you are driving it will cause extensive damage to your car.
Try rotating the ignition switch slightly after you turn it to on and see if the lights come on...had the same problem and changed the switch fixed the problem...
×