Question about 2005 Ford Futura

1 Answer

I have a 1965 food falcon with a mustang 302 (1978 ) v8. how do i know if it is a windsor or not?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 94 Answers

Well there is a 302 cleveland, they are mainly an Australian engine. Identifying one is much like telling the difference between a 351 windsor and a 351 cleveland. Based on the fact that it's from Ford's 335 engine family. 8 cap screws to hold on the valve covers, the block is longer do to the timing chain housing being integrated. The fuel pump bolts are mounted vertically, and the exhaust bolt holes are diagonal. Also, a big difference between an american 302 and an aussie 302 cleveland, is the connecting rods for the cleveland are 6.000''. Where the american 302 connecting rod length is 5.090". Also, referring to a 302 as a windsor is incorrect, it's block families name is the 90 degree v8. The only engine in that family that is properly named the windsor, is the 351 windsor. The 90 degree family also includes the 302 boss. The boss has cleveland style heads, and the block has screw in freeze plugs.

Posted on Nov 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the power of engine truck ford f-350 6 cylinder 1962


Powertrain[edit] If it's a stock engine, not changed out, probably 132hp.
Engine Years Power 223 CID Mileage Maker I6 1961-64 114 hp (85 kW) 262 CID Mileage Maker I6 1961-64 132 hp (98 kW) 292 CID Y-block V8 1961-64 170 hp (130 kW) 240 CID Straight-6 1965-66 150 hp (110 kW) 300 CID Straight-6 1965-66 170 hp (130 kW) 289 CID Windsor V8 (Mexican market) 1965-66 160 hp (120 kW) 352 CID FE V8 1965-66 208 hp (155 kW)

Nov 07, 2017 | Ford Cars & Trucks

2 Answers

LABOR TO INSTALL FRO A CLUTCH JOB FOR 65 MUSTANG 289


About 6.5 hours to do the job. Times their labor rate. Buy a flywheel. I can guaranty yours will be bad. Weather is or not.

May 15, 2015 | 1965 Ford Mustang

1 Answer

I have a 1965 mercury comet with a 289 v8. I want to know what type of differential I have in it so I can buy a new cover for it


Here are the spec's for the 1965 mercury comet, 289 V8:

For 1965, the Comet Cyclone was powered by the 289-cu.in. V-8 with 225hp, the same engine that was put into Mustangs. And for more power, there was a special high-performance package, better known as "Hi-Po," available with the Cyclone, and it shared the 271hp V-8 which, when installed in a Mustang, was known as the "K" code car. In the Comet, the engine code is "A." When equipped with the Hi-Po package, a 1965 Cyclone came standard with: 289 four-barrel high-performance engine, four-speed Toploader transmission, nine-inch differential, performance suspension, quick-ratio steering and 8,000-rpm Rotunda tachometer. However, the following items were extra-cost mandatory options with the 271hp engine package: four-speed transmission, heavy-duty front suspension, low-profile rayon tires and 42-amp alternator, according to 1965 sales information.

Its a 9-inch differential at best. Try this link for more data:

1965 Mercury Comet Cyclone

Apr 13, 2015 | Mercury Cars & Trucks

1 Answer

1965 falcon sedan resistor


Ignition ballast resistor is usually mounted on the firewall near the back of the engine. It's white, rectangular, and has a wire connector on each end. It's function is to limit primary coil current during engine running. The ballast is bypassed during starting so you get a higher spark voltage. If you remove the ballast, you will burn out your coil.

Feb 23, 2014 | Ford Falcon Cars & Trucks

1 Answer

1965 ford 352 engine blows oil out of breather. what causes this. pcv valve in right side of engine. should I have another breather installed or additional pcv


I know the 65 didn't come with a 352, what is a 352? I thought it was a 351 windsor,? Anyway, did you rebuild the motor? There is a vent under neath the intake sheet metal that clogs up, It is held in the with a plate and rivets, you either have to remove the rivets or soak the whole thing in solvent. It will upset the car's pcv, a new pcv valve won't hurt, you don't need to be drilling holes, you might make it worse. Check all your vacuum lines. Make sure you have no leaks. Hope this helps.

Aug 16, 2010 | 1965 Ford Mustang

1 Answer

I would like to know about an engine number they say it is number C5AE6016 (5B11W)its in a 65 F/B date 13T engine code A unit no. 157042 was there a 6016 block???


Yes. It had larger main caps than the typical 289 block. However there are variations on the theme and you could see a smallblock with a 6016 that predates the 289 alltogether (260 or smaller) as well as into the 70s even on a 351 windsor! Hopefully you have a hipo 289 bottom end with the larger caps and thats all you need to know.

Oct 04, 2009 | 1965 Ford Mustang

1 Answer

V8 motor viabrates when revving


Access and removal can be done from underneath. Remove all the belts. Remove the bolt from the center of the balancer. Then you will need to get a puller to remove the balancer. They can be a little pricey to purchase, but you need it. You can do it from the top, but you probably would need to remove the fan from the water pump to get enough room to work. It's your option.

Mar 16, 2009 | 1993 Ford Mustang

Not finding what you are looking for?
2005 Ford Futura Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...