Remove the wheels if possible.
Remove the two clips from each side (by pulling up the center).
Move the fender liner away to access and remove the 7 mm bolt that is near the corner.
Unscrew the four cargo anchors from the floor of the trunk.
Move the trim panel and remove the 4 10mm bolts.
To get to the license plate lights assembly, you can follow these steps:
Open the rear compartment lid and locate the license plate light assembly inside the trunk lid.
Above the license plate, locate four Philips head screws holding the license plate light assembly inside the trunk lid.
Remove the screws (caution: in winter, plastic is extremely fragile and can break easily).
Once the screws are off, your license light assembly is loose inside the trunk lid.
rear bumper cover removal?? ' Cadillac Owners Forum (cadillacforums.com)
2002 escalade changing liscense plate lights ' Cadillac Owners Forum (cadillacforums.com)
also my license plate light is not working
×