Question about 2002 Kia Spectra

1 Answer

How do I reset the check engine life - 2002 Kia Spectra

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

Your car supports EOBD-2 this means it can only be cleared with the right ISO plug-in tool (most garages have them) if the fault is still present the light will come back on.

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I had my oil changed in my 2007 Acura MDX this morning and the Honda Dealership had no idea how to reset the indicator. How do I do this?


Courtesy of oilreset.com:
Turn the ignition to (II) - do not start the engine. Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed. Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display. Select RESET by pressing the INFO (??²/??¼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100. Turn the ignition off and then start the engine to verify the indicator has been reset. *Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).
Best of luck! Greg

Jan 28, 2011 | 2007 Acura MDX

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

3 Answers

NEED TO RESET OIL CHANGE LIGHT


How to Reset the Engine Oil Life System
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.
Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System:
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the Engine Oil Life System has not reset. Repeat the procedure.
Good luck and thanks for your question and I hope my suggestions help. burdfrenzy
Visit My eBay Store!
http://stores.ebay.com/Pittsburgh-Joes-Pants-Nat

Jan 03, 2011 | 2008 Chevrolet Impala

1 Answer

1998 Buick Park Ave., Check engine light is on, the computer displays Oil Change


The check engine light and the oil change indicator message are more than likely not related. You can toggle through the functions and get the oil life % to display then push the reset and hold it for a few seconds and it will reset the oil life indicator message. It should read oil life 100% after reset. (I would change the oil and filter if you have not already done so.)

The check engine light means you are setting an engine code, if it stays on, it is a hard code, if it is intermittant it is a soft code. Have it checked with a scan tool -- plug into your a.l.d.l. connector below the dash on the drivers side and read the code. Autozone and other places will do this for free.

Sep 28, 2010 | 1998 Buick Park Avenue

2 Answers

I JUST CHANGED THE OIL ON MY 2006 COBALT AND THE READ OUT STILL SHOWS 25% ,MY QUESTION IS HOW DO I RESET THIS .THANKS


Try this and if it does not work let me know.

1. Turn the ignition key to the "Run" position but do not start the engine.

2. Press the display button until the display reads "Oil Life"

3. Press the accelerator (gas) pedal all the way down and all the way back up 3 times within 5 seconds.

4. The oil life index should reset to 100 or the display will read "Oil Life Index Resetting", and when completed then turn off the ignition.

Start the vehicle and verify that the oil life has been reset, and if it did not reset then repeat the procedure, because sometimes it will take more than one try to clear and reset the oil life index.


If that does not work then try this procedure...


1. Press the fuel information button until ENGINE OIL LIFE appears on the Driver Information Center (DIC).

2. Press and hold the select button.

3. The engine oil life percentage will return to 100.

4. Turn the key to OFF.

5. If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset.
Repeat the procedure.

Sep 26, 2010 | 2006 Chevrolet Cobalt

2 Answers

How do i reset the oil life on a 2005 gmc c8500


Most often you need a code reader with a reset function that can connect to the computer jack under the dash and reset factory functions like that. Pain in the tush if you are changing your own oil. Mechanics and dealers have the equipment to do that reset.

May 20, 2010 | 2006 Chevrolet Silverado 3500

1 Answer

How to reset 2005 humer h2 oil life after oil change to show 100% ?


1. Turn the ignition to RUN with the engine OFF.
2. Press and release the reset button in the driver information center (DIC) until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear on the DIC display, press and hold the reset stem until several beeps sound. This confirms the OIL LIFE system has been reset.
4. Turn the key to lock. If the CHANGE OIL message comes back on when you start the engine, the ENGINE OIL LIFE system has not reset. Repeat the procedure
__________________

Nov 21, 2009 | 2007 Cadillac CTS 3.6L

1 Answer

I DID THE OIL CHANGE AND NOW THE ENGINE LIGHT IS ON SAYING I NEED TO CHANGE ENGINE OIL NEED TO RESET


With the key on but the engine off press the ODO/tripA/TripB reset stick several times until the message center says press reset to enter system check. Press reset stick twice and oil life will be displayed. Press it again and it will tell you to hold it if you want to reset oil life. When it shows 100% turn the key off and you're finished.

If you have the 3 button system you're going to press the set up buttons until you see oil life and then press the reset button.

Oct 13, 2009 | 2006 Ford Explorer

4 Answers

Reset oil life display after oil change?


THIS SHOULD BE IT.
How do I reset the Engine Oil life monitor and how does it work? TO reset To reset the Engine Oil Life monitor do the following:
Reset Oil life in NAV/DIC by (with car running) going to INFO>Oil Life>RESET
Press and HOLD until XXX turns to 100%
How does it work? The oil life monitor is a pretty sophisticated algorithm.

GM "The GM Oil Life System will automatically adjust the oil change interval based on engine characteristics, driving habits and the climate in which the vehicle is operated."

Feb 09, 2009 | 2007 Cadillac CTS 3.6L

3 Answers

How to reset oil life on 1994 cadillac sedan deville


To reset the engine oil life, do this: push info button till oil life comes up, then push inforeset, to reset to 100%


To reset the transaxle oil life do this: early models; press off and rear defrog button simultaneously.
later models; press info till the oil message shows up then, press and hold info reset.


Some models have both, but my 94 Deville only monitors the transaxle

Sep 24, 2008 | 1994 Cadillac DeVille

Not finding what you are looking for?
2002 Kia Spectra Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...