Question about 1988 Ford Mustang

2 Answers

1988 mustang gt no turn signals ,hazards ,wipers,parking lights all work...checked relays,fuses,fusible links and grounds.....help!

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 3,433 Answers

How about the flasher itself? Mounted on fuse block. or under dash

Posted on Nov 20, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

More then likely its going to be the turn signal switch itself. With everything else working, the switch fr the signals probably wore out. Keep in mind the car is 21 years old.

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for a 2001 VW Cabrio relay. I thought number 6 was for the blinkers/hazards but it's not and its empty. 413 is in there and blinkers and hazards just stopped one day. I don't know if I...


A2Resource
a great vw resource site
25345733-zc0klvszlbpkidh1d23fhked-5-0_0.gif
Relays:
Num.Relay Arrangement and Pinout (with control number stamped on relay)
1A/C Relay (13 or 140)
1A/C Switch
2Radiator Cooling Fan
3Fan Switch High Speed
4Battery, Fuse 23
5A/C Clutch (via pressure and temperature switches)
6Main Fusebox Battery Power, Fuse 19
7Main Fusebox Ground
8Fresh Air Fan
2Rear Wiper Relay (72)
1Main Fusebox Ground
2Main Fusebox Run Power, Fuse 4
3Rear Wiper Motor
4Wipe/Wash Signal from Switch
3Digifant Control Unit (30 or 32), Motronic OBD1 Control Unit (109)
1Main Fusebox Ground
2Tachometer
3Main Fusebox Start/Run Power
4Main Fusebox Battery Power
5To ECU (relay ) (1990 G60, ABA/VR6 OBD1 only)
6To ECU and Engine Electronics
4Load Reduction Relay (18)
1From Ignition Switch Run Power
2To Main Fuse Box Run Power
3Main Fusebox Battery Power
4Main Fusebox Ground
5Low Coolant Level Control Unit (43)
1Main Fusebox Start/Run Power
2Low Coolant Level Sensor
3Coolant Temperature Sensor, Gauge
4Main Fusebox Ground
6Flashers (21)
1Main Fusebox Ground
2Flasher Output
3Flasher Input/Power
4X/6 (Trailer Light)
7Headlight Washer (33)
1Main Fusebox Ground (B/4 to C/3 to Ground)
2Headlight Washer Pump
3Headlight Switch Pin 56 (headlights) (B3 to D4 to light power)
4Main Fusebox Battery Power (B/5 to Y/2)
5Windshield Washer Pump (B/1 to B/2 to washer pump power)
8Wash/Wipe/Intermittent Relay (19 for standard relay, 99 for variable intermittent module)
1Main Fusebox Ground
2Intermittent Switch
3Main Fusebox Run Power, Fuse 5
4Park/Low Signal (ground when parked, positive when on low speed)
5Wiper Motor Low Speed Output
6Wash Switch (positive for front wash)
9Seat Belt Warning Control Unit (4 or 29)
1Main Fusebox Ground
2Seat Belt Switch
3Door Switch
4Seatbelt Light
5"Key In" Power from Ignition Switch
6Main Fusebox Start/Run Power
7Automatic Shoulder Belt Controller
9Radio/Lights Buzzer (36)
1Main Fusebox Ground (not used)
2A1/4 (Left Parking Lights)
3Vehicle Speed Sensor
4Seatbelt Light (not used)
5"Key In" Power from Ignition Switch
6Main Fusebox Start/Run Power (not used)
7A2/2 (Right Parking Lights)
10Fog Light Relay (110 for fog lights with low beam headlights only, 53 for parking light/high beam fog lights)
1Parking Light Power
2Headlight Switch Headlight Power (Low/High)
3Fog Light Switch Power, Fuse 10
4Main Fusebox Battery Power
5Main Fusebox Ground
6Low Beam Headlight Power
11Horn (53)
1Main Fusebox Start/Run Power
2To Horns
3Main Fusebox Ground
4From Horn Button
12Fuel Pump Relay (80, 67 or 167)
1Main Fusebox Starter Power (not used)
2Main Fusebox Start/Run Power
3To ECU (Fuel Pump )
4To Fuse 18, Fuel Pump, Oxygen Sensor Heater
5G2/6 (not used)
6Main Fusebox Battery Power From 30B
7G2/7, T1 (not used)
8Main Fusebox Ground (not used)
9M/4, U1/8, G2/5 (not used)
12Glow Plug Relay (102 or 104)
1Main Fusebox Starter Power
2Main Fusebox Start/Run Power
3Engine Temp Sender (preheat)
4Glow Plugs (Z1)To Fuse 18 (not used)
5G2/6 (not used)
6Main Fusebox Battery Power From 30B
7G2/7, T1 (not used)
8Main Fusebox Ground
9Water Separator, Glow Plug Light

remember to check out the website below for more help
http://www.xjamiex.com/mk2resource/electrical/CE2.html

Dec 30, 2014 | Cars & Trucks

1 Answer

95 mustange gt brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i...


I assume the fuse has power if the hazards work.
The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch.
Do you have power going into the turn signal switch on the red lite green wire from the brake switch ?

Feb 17, 2013 | 1995 Ford Mustang

1 Answer

Turn signals will not work. replaced all bulbs, fuses, turn signal switch. I still have one bulb that does not work at all ie, when hazards light are on.


sound like either a bad wire or some have a fusible link that can go bad.
A faulty hazard switch which also has a built in relay like the turn signal, can cause problems as well.

Sep 29, 2010 | 1984 Ford F 150

1 Answer

I have no headlights on 1988 mustang gt turn signals brake lights and parking lights and dash lights all work but the head lights wont come on checked all fuses and relays there all good thanks


Check headlight lamps... then follow the wiring from the bulb connections back and make sure you're getting a good solid ground connection. It may have a loose, broken, severed grounding wire.. it's usually attached to the car body at some location not far from the headlights.

Oct 14, 2009 | 1988 Ford Mustang

1 Answer

Mustang brake lights dont work


this car has a brake light switch on the pedal check for power in and out. if in and not out change switch. also I believe their is a relay under the hood . then check to see if the multifunction and hazard switch control brake lights i cant remember if they do like gm's but i am also almost sure they do the multifunction is your turn signal wiper arm that goes into steering wheel . after you check the brake switch and relay have some one jiggle the hazard and multi while pressing the brakes see if they come on. you can call ford and ask them about the multi and hazard .

Jun 02, 2009 | 2000 Ford Mustang

1 Answer

1988 Ford Mustang. Turn signals won't work


If the signals come on, but don't flash, check & or replace your flasher, or swap it with hazard flasher if it's the same to confirm flasher is the problem. Hazard & blinkers are on serarate flashers.

Mar 04, 2009 | 1992 Chevrolet Lumina

5 Answers

Turn Signal Flasher location in 93 Mustang GT


The flasher is a small round plastic cylinder (unless replaced with a metal one) behind the left edge of the glove box that will look similar to the one in the fuse panel. The first step is to squeeze gently both sides of the open glove box and let it swing downward. It will be snapped into a metal horizontal brace just to the left of the glovebox opening by a small tab and have two wires attached. The number more than likely will be a #552 although I have seen a factory one with a Warner #224

Feb 11, 2009 | 1993 Ford Mustang

2 Answers

Turn signals /hazard lights don't blink


I had the same problem and found the problem to be the turn signal flasher.local parts store sells for 9.99.The hardest part I found was finding someone who knew the location of the part on the car.after checking with a mechanic at the dealer. I finally found it with a flashlight. it is against the driver side firewall inside of the car as far up as you can see while laying on your back in the floorboard and looking up with a flashlight. as soon as this was replaced my hazard lights and turn signals worked perfectly. hope this helps someone else.

Jun 03, 2008 | 2000 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...