At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I need to know if the drivers seat from a 2007 Ford...
I believe it will however the plug connection for the electrics may differ, check that first, also they may be a different texture in the fabric. Good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Need diagram for 2007 ford focus fuse box.
Samuel, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Remove back seat ,bottom first push seat in the middle with both hands ,lift after you have pushed on seat this releases the catch.remove the top part of the seat you will need to remove 2 screws lift srtaight up the seat will come out ,now you will see sound deadning material ,remove ,carefull not to tear,with flash lite look at inside of trunk lock area ,you will see a slot on the latch ,use regular flat screw driver to insert into slot just turn right ,left the trunk will open .you can take out trunk lock cylender out and any lock repair shop can re key the lock by looking at the tumblers inside the cylender.Good luck I know this will work ,sounds like a lot of work but not realy.
not sure what the sound was, but if there's a blown head gasket, the water that gets in a cylinder won't compress and it won't turn over very well and sometimes not at all. that may be what they mean by "holding compression".
check for water in the oil...it'll foam up on the dipstick,
Get a second opinion from a reputable shop other than Ford.... If it's a head gasket, it's much cheaper than an engine swap, if that's what you're thinking...
if there are a small part of the backseat (ca 10 cm high located at the bottom of the back) that can be picked out, you have isofix points.
if your backseats are in one pice, theres not
×