Question about 2005 Chevrolet Cobalt

1 Answer

Where is a power steering pump located on a 4 cylinder in a 2005

Where is a power steering pump located

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,803 Answers

Your Cobalt is not equipped with a Power Steering Pump. It is equipped with electric power steering. See the description below.


Power Steering - System Description and Operation
The electric power steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the body control module (BCM), power steering control module (PSCM), torque sensor, discrete battery voltage supply circuit, EPS motor, serial data bus, and the instrument panel cluster (IPC) message center to perform the system functions. The PSCM, torque sensor, not the EPS motor are serviced separately from each other or from the steering column. Any EPS components diagnosed to be malfunctioning requires replacement of the steering column assembly, also known as the EPS assembly.

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change a power steering pump on 2000 Dodge caravan 2.2 4 cylinder


https://www.bing.com/videos/search?q=power+steering+pump+2.2+4+cylinder+dodge+caravan&qpvt=power+steerin+pump+2.2+4+cylinder+dodge+caravan&FORM=VDRE. This should get you where you need to be

Jan 29, 2017 | Dodge Caravan Cars & Trucks

1 Answer

My 2005 5.7 jeep grand cherokee has went through 4 power steering pumps?


take off the radator cap drive a new car under it . no really sould be the racket pioin gears

Nov 16, 2012 | 2005 Jeep Grand Cherokee

1 Answer

Location of power steering pump on Pontiac G 6 v 6 2005


Um.......... If you have the 3.5 engine........... there is no power steering pump. It is all electric. And its garbage. You can thank GM for taking the cheap way out.. its all electric. That's why so many people are having problems with power steering and so many people are getting in crashes.

Oct 16, 2011 | 2005 Pontiac G6

1 Answer

Where is the cam shaft sensor located on my g6?


THE 2.4L ENGINE CMP SENSOR LOCATED REAR OF THE ENGINE CYLINDER HEAD. FOR THE 3.5L ENGINE CMP SENSOR LOCATED BEHIND TOP OF TIMING COVER IN FRONT OF THE INTAKE MANIFOLD. FOR THE 3.6L ENGINE HAS 4 CMP SENSORS LOCATED TWO ON EACH CYLINDER HEAD. FOR THE 3.9L ENGINE CMP SENSOR LOCATED IS LOCATED ON THE FRONT OF THE ENGINE ABOVE THE CRANKSHAFT PULLEY BELOW THE POWER STEERING PUMP PULLEY.

Aug 12, 2011 | 2006 Pontiac G6

1 Answer

I own a 2001 oldsmobile alero, 4 door and 4 cylinder, and my rack and pinion went out. Im needing to know if my car has power assist in order to purchase the part.


if you have power steering then you have power assist as i don`t think gm came out with electric assist until a few years later.look under the hood for a power steering pump this is usually located at the rear upper passenger side of the motor.

Apr 09, 2011 | Oldsmobile Alero Cars & Trucks

2 Answers

Location of the brake fluid input


the brake fluid resivoir is above the master cylinder on the firewall. so on the left side near the windshield. the power steering resivoir is closer to the front end and is distinguished by not being connected to the master cylinder..

Feb 08, 2010 | 1987 Mercedes-Benz 300-Class

1 Answer

Where is a power steering pump located on a 4 cylinder chevy cobalt ls


Your Cobalt is not equiooed with a Power Steering Pump. It has electric power steering. See the description below.

Power Steering - System Description and Operation
The electric power steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the body control module (BCM), power steering control module (PSCM), torque sensor, discrete battery voltage supply circuit, EPS motor, serial data bus, and the instrument panel cluster (IPC) message center to perform the system functions. The PSCM, torque sensor, not the EPS motor are serviced separately from each other or from the steering column. Any EPS components diagnosed to be malfunctioning requires replacement of the steering column assembly, also known as the EPS assembly.

Nov 20, 2009 | 2005 Chevrolet Cobalt

2 Answers

Fuel injector flush how hard is it to do it yourself? That and power steering and brake flsuh. 2005 Avalance V-8


depending on how bad the injectors are you can put some Lucas fuel treatment in your gas tank and it will clean them up for you. I use it every other fill up and have had no problems. My avalanche has 88,000 miles and I have never had injector problems. The power steering flush and brake flush you will need a vacuum pump.

Brakes: Locate the bleeder valve on each caliper and hook up your vacuum pump to it and pump it 4-5 times. Make sure your fluid reservoir is full. Put clean fluid in reservoir as needed. Repeat this again. ON bake brakes you will want to give it a few more pumps than the front because they are farther away from the master cylinder. You will need 2 of the small bottles of brake fluid or 1 large bottle. Sorry, I dont remember the oz. on each size.

Power steering: place a hose into the reservoir and pump all fluid out. Turn wheels all the way both ways and repeat twice. You will need several courts of power steering fluid.

Oct 27, 2009 | 2005 Chevrolet Avalanche

2 Answers

1996 GMC Suburban Brake and Power Steering Failure


if you got the hydro brake boost system .check your power steering pump hoses for leaks .check master cylinder is leaking. fill power steering pump and master cylinder with fluid. the one that is the lowest that the one leaking. if your hydro boost brake unit is leaking .replace it .if power steering pump leaking. it not the hoses replace it . because if power steering goes out brakes will also go out.

Apr 29, 2009 | 1996 GMC Suburban

3 Answers

05 impala steering noise. Rack or Power steering pump


the power steering fluid is probly the first thing u should check if that doesnt fix it replace ur fluid pump,.the resevior should be right around ur brake booster and master cylinder,.hope u fix it and find it

Nov 20, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2005 Chevrolet Cobalt Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...