Question about 1996 Chevrolet Camaro

1 Answer

Horn does not work 1996 camaro fuses ok - 1996 Chevrolet Camaro

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 364 Answers

I have a 94 z28, check under the hood on the actual horns, make sure the plug has not been dislodged, there is also a relay for the horns try replacing that too, there are 4 screws behind the horn/airbag pad to remove the cover if needed. Hope this helps, Good luck

Posted on Nov 20, 2009

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 436 Answers

SOURCE: 1996 Saturn SL. Horn doesnt work. Fuse is ok.

it is behind bumper drivers side. I believe there is a relay in the horn, making the horn unique and origional replacement required. if it has three wires in it then it has built in relay.

Posted on Oct 06, 2009

  • 6 Answers

SOURCE: 1996 olds. 98. horn stuck on. where is fuse

You have a fuse under the driver side dash and also under the hood on the right side. Sometimes your fuse box is right inside the passenger door.

Posted on Jan 06, 2010

  • 243 Answers

SOURCE: My 1996 jetta horn does not work. Fuse / relay okay

hi did you also checked the horn itselfs. when you take out the horn and look at the back you will see a adjust srew with sealingmastic on it. you can remove the sealingstuff and try to adjust the horn. this only works if the coil is not broken. but first you have to check the connection inside the steeringwheel. make sure the switch in the steeringwheel is making contact to earth. if this all doesnt work you have to buy a new one goodluck.

Posted on Feb 16, 2010

  • 1810 Answers

SOURCE: My 1994 camry horn isn't working fuses ok help

check the reley and the horn is pluged in also it might even be in the styering wheel that the wire is disconected if you had an air bag deployment

Posted on Dec 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't my horn work? I have a 1996 Ford aspire manual and my horn doesn't work. Also, the airbag light is blinking. I just bought this car two months ago and haven't had a problem yet, just wondering...


Assuming the 15A STOP FUSE in the dash fuse box is OK, he problem may be failure of the horn relay, the left and/or right horn switches, the clockspring assembly or the horn itself.

Feb 10, 2015 | Ford Cars & Trucks

1 Answer

Where is the fuse for the horn on a 1992 chevy camaro


I have a 92 chevy camaro Rs. My horn on steering colum don't work. They ran wires from battery and put a horn button next to driver left side of steering wheel in 2015. My question is where is Horn relay located so i can check that and fuse first before letting someone open up steering wheel for connection. I am a Female trying to do this. My husband has no patience for this stuff. And always ends up with xtra parts after... SOS

Mar 15, 2013 | 1992 Chevrolet Camaro

1 Answer

I'm fixing up a Camaro I bought from a friend and one issue I can't figure out is why the horn isn't working. I've checked all the fuses under the hood and they are all good. When you


the clicking sound you here is the switch get out a test light go straight to your horn have someone hit the button if your test light lights up your getting power next thing to do is to check ground use a ohm meter and check for less then .5 of ohm of resistance any more is bad and you should run a new ground if your still un sure hook the horn straight up to the battery and see if it will go off lol good luck!!!

Jul 09, 2012 | 2001 Chevrolet Camaro

1 Answer

It does not work when you push the horn button


Check power at the horn using a circuit tester.
Disconnect horn, connect tester, and press horn switch.

If light glows...replace horn.
If light no glow...check for a 15A fuse for horn in distribution panel under the dash.

Hope this helps...

Jul 23, 2011 | 1995 Chevrolet Camaro

1 Answer

The horn in my 96 pontiac sunfire isnt working. How would i go abou fixing that?


ok this problem could be in several places. most likely its a blown fuse or more likely a relay.check your owners manual for locations. if its not a fuse or relay then its in the horn itself or possibly in the contacts in the switch.The easy way to find it is unplug the horn have a friend depress the horn button and use a test light to see if you have voltage at the horn.if so replace horn. If not check the fuse if the fuse is blown replace and try again. if the fuse is not blown then check the relay.

Feb 28, 2011 | 1996 Pontiac Sunfire

5 Answers

Horn not working on 1999 z28 camaro / what could


Well, it could be a fuse. Check the associated fuse, if it is ok then proceed to checking for power at the horn (it should have 12v). If the horn has power then replace the horn. If it does not then seek proffesional certified help due to the fact that the problem is going to be in the steering column or horn pad, and that will require dealing with the airbag system (which is NOT recommended) unless qualified.

Nov 24, 2009 | 1999 Chevrolet Camaro

2 Answers

1996 Saturn SL. Horn doesnt work. Fuse is ok. Can't find horn under hood.


it is behind bumper drivers side. I believe there is a relay in the horn, making the horn unique and origional replacement required. if it has three wires in it then it has built in relay.

Oct 06, 2009 | 1996 Saturn SL

1 Answer

My 1998 Toyota RAV4 horn stopped working after a hard honking.


Check the wires are connect to the horn properly and not worked loose, if they are ok then you need a new horn,
Hope this helps

Dec 11, 2008 | 1996 Toyota RAV4

Not finding what you are looking for?
1996 Chevrolet Camaro Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...