Question about 1992 Oldsmobile 88

2 Answers

Key lock cylinder replacement

I just replaced the key lock cylinder in my 1992 oldsmobile eighty eight. Everything looks good but when I try to start the car, it tells me to clean the key and try again after 3 minutes. I think it might be the theft-lock system. Any help?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

Try to leave the key on for up to 25 minutes. Some of these cars relearn that way. Then try to start the car. Usually it only takes 10 to15 min but I'm just being safe.

Posted on Nov 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 364 Answers

Key programme may need to be reset at a dealer, call your local dealler and explain this, they will no doubt ask you to come in, simply tell them you can't. and ask what alternative soltion can they recommend. Sorry not much help here. Good luck

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set up key fobs for 1996 Oldsmobile 88ls sedan?


factory replacements?
usually jump aldl conn term 1 and 4 and hold lock/unlock button til locks cycle

Jan 30, 2015 | 1996 Oldsmobile Eighty Eight

1 Answer

Factory security on 2000 Park Ave won;t let me start car


check pass key wiring/circuit in steering column for "open" value,if so,replaced ignition cylinder and key. very common problem.

Sep 14, 2011 | 1998 Oldsmobile Eighty Eight

1 Answer

I have a 1992 oldsmobile eighty eight royale ok i have no turn signals four ways work both turn signal lights light up on front of car but do not blink and checked bulbs on rear of car and they are all...


sounds like the flasher in the fuse box you may have 2 //1 for blinker the other for 4 way flasher . turn on the 4 way flasher you will hear it clicking under the dash find it pull it out and find the other one that looks the same and swap them they should be sliver and round in the fuse box

Mar 22, 2011 | 1992 Oldsmobile Eighty Eight

2 Answers

Looking for the correct spark plug wire placement on a 1995 oldsmobile 88 LSS


I'm assuming that you are refer to the "firing order", so check this...

1995 Oldsmobile Eighty-Eight Royale FWD 3.8 liter V-6 VIN "K"
and
1995 Oldsmobile Eighty-Eight Royale FWD 3.8 liter SC V-6 VIN "1"

67ff6e8.gif

1995 Oldsmobile Eighty-Eight Royale FWD 3.8 liter V-6 VIN "L"

b3a8e61.gif


Hope helps (remember comment and rated this).

Jul 22, 2010 | 1995 Oldsmobile Eighty Eight

1 Answer

1992 Eighty Eight: vehicle present DTC 41 constantly.I change the CMP...


You need to replace the pick-up magnet for the cam sensor. It is pushed into the cam gear. You have to remove the timing chain to install it.

May 18, 2010 | 1992 Oldsmobile Eighty Eight

1 Answer

When I turn the ignition key the car start but as


Replace the harness on the back of the ignition. Junk Yard

Mar 01, 2010 | 1992 Oldsmobile Eighty Eight

1 Answer

No start on key help cancel chip key or resistencia ?ohms????? is oldsmobile eighty eight 1992 serial 1g3hy53l8nh tank yuo


you have to measure the resistance of the key chip then there is an orange wire coming down the steering collum cut this wire and solder a resistor with th correct ohms in between the wires inside the orange cover that will by pass the pass key system

Oct 20, 2009 | 1992 Oldsmobile 88

1 Answer

NO START CLEAN KEY ANDWAIT 3 MINUTES MESSAGE


Do you have a second key?
Try it also.
The key reader may defective in the lock cylinder.

Sep 04, 2009 | 1992 Oldsmobile Eighty Eight

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...