Question about 2002 Daewoo Nubira

1 Answer

Do i fill the auto transmission through the top screw out plastic plug till it is overflowing? i have already put in 6.5 litres

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The level plug is a small hex head plug on the drivers side of the transmission above the engine pipe near the drivers driveshaft.10mm head. this info came from a holden dealership.

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change the transmission oil, and how many quarts to use, knowing that the SUV has what is called a sealed transmission.


Basically, these transmissions are filled using what's called a "double fill" technique. There are two drain plugs, one which actually drains the pan, and another that has an overflow collar inside that sets the level. You basically pump transmission fluid in with the engine off and the overflow plug out, until the fluid starts to flow out of the plug. Then start the engine and let it idle, pump in more fluid again until it starts to overflow again, and then replace the drain plug. This is supposed to be done with the ATF at approx. 40deg C, or basically just warm to the touch. You will likely need around 4 qts of fluid.

Dec 25, 2014 | 2006 Mercedes-Benz ML 350

1 Answer

1997 Ford 250 ,having trouble shifting .It's shifting hard .what can I do ?


check fluid, if you cant check it the usual thing is buy 1 litre of your fluid type and top up till overflows, replace plug.

Sep 24, 2014 | Cars & Trucks

1 Answer

Toyota Manual


There are two plugs on the bottom of the transmission pan. The one twards the back of the truck is the drain. The one in the middle is the overflow.
Put the truck on a flat surface, take out the plug in the middle (some fluid will drain)
There is a large plug on the passenger side rear of the transmission to fill it with.

I suggest draining all the fluid if your having problems, install your snake oil, then fill the transmission up untill it starts coming out the overflow. cap off both, drive the truck for 10 miles, then check the fluid again by adding more untill it comes out the overflow.

Oct 23, 2013 | Cars & Trucks

1 Answer

Transmission


There are two types of transmissions in 1991 Toyota Corolla. Manual Transmission and Automatic Transmission.
1. Manual Transmission:
The transmission oil is checked through a level bolt which is provided to the left CV joint side in the middle of transmission. To check the oil level, park the car on a level floor, remove the level bolt with 22 mm or 24 mm spanner. If the oil starts coming out of this hole the oil level is considered OK. If not, top up the oil till it starts coming out and tighten the bolt. The recommended manual transmission oil grade is 75W/ 90W and total capacity is 2.4 Litres.

2. Automatic Transmission:
Warm up the engine, park the car on level floor, pull up the hand brake, gear lever stick in P, keep the engine start, let the radiator fan come on, take the auto-transmission stick out, wipe it with a clean dust free cloth, insert it in, again take it out, keep the stick in horizontal position and check the oil level. At operating temperature the auto-transmission oil level should be at upper level (Hot). If not, add oil to mach the mark. The recommended auto-transmission oil is Automatic Transmission Fluid (ATF) Dexron II, and total (drain and refill) capacity is 1.4 Litres.

Oct 09, 2013 | 1991 Toyota Corolla

2 Answers

How to find 2000 Chrysler jxi convertible top motor


sebring transmission pan torque spec need torque specs for 2000 Sebring jxi convertible, transmission pan torque specs and bolt tighting

Nov 29, 2011 | Cars & Trucks

1 Answer

HOW TO ADD OIL TO FLOOR JACK?


on the side of the ram you will see in the middle a screw or a rubber plug you might have to lift
arm up and block it with a peace of wood use ether hydraulic oil or auto matic transmission fluid
don't fill it to the top its going to be time consuming but put some in and try it if it doesn't pump to
the top than add more till it works to the top

hope this helps you
bob

May 22, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

My 2007 G6 with a V6 engine doesn't have a dipstick to check the transmission fluid. Is this normal?


its a sealed transmission. it has a cap that screws on the transmission to add but you cant check the level. the only way is to put it on a level lift and under the transmission there are two small plugs that unscrew (metal bolts) may be allen head, cant remember exactly right now its been a while, one to drain and other about 2 or 3 inches higher that you remove and fill with fluid trough plastic cap i mentioned before till it starts draining trough the bolt hole. then you know it is level. tighen all screws and ports backup and your done.crzejkr_2.png

just add half qts by half qts till fluid drains from level plug. REMEMBER ENGINE MUST BE HOT AND RUNNING ON.
IF YOUR DRAINING CHANGING FILTER AND REFILING FROM NOTHING WARM ENGINE UP ON OLD FLUID THEN START PROCEDURE.

Mar 16, 2011 | Pontiac G6 Cars & Trucks

1 Answer

How do you add transmission fluid on a 99 olds


right below the middle of the exhaust crossover pipe in the top of the trans is a black or red screw in cap with no dipstick thats the fill. to check is a plug right above the right axle (7/16 wrench) you need to remove with engine running and fill till fluid runs out on level ground then put both plugs back in and your done

Jul 17, 2009 | 1995 Oldsmobile Aurora

1 Answer

Filling a manuel transmission


on the driver side of trans. there is 2 plug one above each other open the top one put oil in by the top
till it drip from the plug put plug back in, you are good to go

Mar 28, 2009 | 1996 Pontiac Sunfire

2 Answers

Add transmission fluid


On 91 vehicles there's a 17mm allen screw on the side towards the left front wheel. Open it add the oil there on a level surface and fill till oil reaches the hole and starts coming out. DO NOT FILL OIL FROM THE TOP where what seems to be a plug. It's actually the timing marks and houses the clutch. Put oil there and you'll need a new clutch.

Nov 01, 2008 | 1991 Volkswagen Jetta

Not finding what you are looking for?
2002 Daewoo Nubira Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...