Question about 1995 Pontiac Grand Prix

1 Answer

Lost a ring down the heater vent - 1995 Pontiac Grand Prix

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 422 Answers

Get a new wife its easier

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Daughter lost a ring in the large dashboard vent at the point where the windshield and dashboard meet in a 2007 HHR. What's the best way to recover the ring?


remove the lower dash liners to get to the plastic trunking going to the heater/ac unit and with a bit of luck you should find it if not its gone in the main unit could be big job to remove

Apr 13, 2017 | Cars & Trucks

1 Answer

Steam blowing out vents when heater is oni check under the hood leaks their was none visibable carpet inside of jeep was not wet


the heater core is blown
or the 2 hoses to it are cracked,
one is 1hr, fix other a lost day or week end.
hoses can be seen bend down and look.

Jan 09, 2014 | 2006 Jeep Liberty

1 Answer

Dropped something in the heater vent


that answer depends on which vent you dropped it in. if it was on the passenger side you can drop the glove box down and open the cabin filter access panel and use a magnet to get what ya lost. the drivers side is a bit more complex.

Oct 26, 2013 | 2005 Kia Sportage

1 Answer

Lost a ring down the front defroster


Thats probably going to be an expensive fix.
Chances are the ring is in the vent ductwork somewhere between where you dropped it and the heater box under the dash.
Since it is probably gold, a magnet won't touch it. So you'll probably have to get the heater box disassembled to retrieve it.
They may have to take the dash out to get to the ductwork.

Apr 29, 2013 | 2011 Hyundai Sonata

1 Answer

When AC is on it blows out the vents until I put my foot on the gas. While Im pressing the gas it comes out the defrost vents then take foot off and it comes out regular vents! Any ideas??


When the gas petal is pushed down the engine needs a amount of vacum to run.If there is not enough vacum it will pull vacum off heater/ac box inside which controls where the ai flow is controled.Check intake for vaccum leaks,hoses,connections.look for vaccum lost.

Oct 23, 2012 | Cars & Trucks

1 Answer

Need to replace heater core for Ford Taurus 2000


Heater and Evaporator Core Housing Removal & Installation To Remove:
  1. Recover the refrigerant.
  2. Remove the instrument panel.
  3. Remove the right side cowl vent screen.
  4. Remove the screws and the water shield.
  5. Disconnect the vacuum supply hose.
  6. Clamp off and disconnect the heater hoses at the firewall.
  7. Disconnect the evaporator outlet spring lock coupling. Discard the O-rings.
  8. Remove the two condenser-to-evaporator line bracket bolts.
  9. Disconnect the evaporator inlet spring lock coupling. Discard the O-rings.
  10. Remove the three nuts at the dash panel.
  11. Remove the screws and the heater outlet floor duct.
  12. Remove the evaporator core housing bolt and nut.
  13. Remove the heater and evaporator core housing.
Heater and evaporator core housing removal/installation ford-10-00-404.gif

To Install:
  1. Install the heater and evaporator core housing in the vehicle. Secure the mounting nut and bolt.
  2. Install the heater outlet floor duct. Secure with the mounting screws.
  3. Install the three mounting nuts to the dash panel. Tighten to 53 in-lb (6 Nm).
  4. Install new refrigerant system O-ring seals lubricated in clean mineral oil. Connect the evaporator lines.
  5. Install the two condenser-to-evaporator line bracket bolts. Tighten to 80 in-lb (9 Nm).
  6. Connect the hoses to the heater core connections. Lubricate the coolant hoses with plain water only, if needed.
  7. Connect the vacuum supply hose.
  8. Install the screws and the water shield.
  9. Install the right side cowl vent screen.
  10. Install the instrument panel.
  11. Lubricate the refrigerant system with the correct amount of clean PAG oil.
  12. Evacuate, leak test and charge the A/C system.
  13. Add coolant as needed.
prev.gif next.gif

Jan 08, 2011 | 2000 Ford Taurus

1 Answer

My diamond necklace fell into my heater vents. I was able grab the chain in time but the diamond fell down into the vent. How do I get into the dash AND the heater vents to retrieve my diamond?


A Ford dealer might be able to help you. The vent heat and air goes down to the air heater, it you take that loose the diamound might just fall out.

Sep 10, 2010 | 2005 Ford Ranger

2 Answers

Where is the heater box located?


electronic heater controls or manual?

check for vacuum leaks in vacuum line from engine to heater controls

Dec 20, 2009 | 2005 Mercury Grand Marquis

1 Answer

Lost ring in dash vent


Your vehicle has a central fan blower under the dash that feeds the cooled or heated air to the vents thru plastic tubes, sometimes round, sometimes flattened and curved to get from spot to spot. There are large vents at the base of the blower unit that supply air to the floor. If you locate that you can find the blower. Then there are smaller tubes that go to the other front and side dash vents. Be careful as there are wires and vacuum lines in the area which are connected to your vent controls on the dash. The bad news is that the top dash vents are usually fed from the top of the blower and may actually require a contortionist or partial dash and blower system disassembly to gain access. If you are lucky perhaps the ring fell all the way into the blower box itself and you may find that removing the side vent tubes alone will allow you to reach in the blower box and retrieve it. Otherwise it may take a professional a couple of hours to do the job and of course they will charge you accordingly. It's up to the value of the ring. Good Luck!

Nov 13, 2009 | 2004 Chevrolet SSR

1 Answer

I need to remove the dash


You will need to remove the heater box. It's a big job and you will need a manual...or bring it to an honest shop that does heater work.If you can't see the ring through the windshield it's either in the defrost duct or in the main box.

May 09, 2009 | 1999 BMW 318 ti

Not finding what you are looking for?
1995 Pontiac Grand Prix Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...