Question about 1988 Chrysler New Yorker

1 Answer

My turnsignals do not work. Also the flashers and the back brake lights do not work. The upper deck brake light does work. The bulbs are not blown. No fuses are blown. Replaced the round relay for the turn signals but they still do not work.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 422 Answers

You probably have wiring problem in the fuse box get a ohm meter or a light tester to see if you have power going to the fuse box

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

1 Answer

No lights in the back except for top brake light


sounds like a real delema, I would check all fuses first, see how it is . then check wiring @ rear for corrosion, bad connection, etc., inspect closly, next, check all light bulbs, closely, anything yet ? Inspect your wires from back to front along frame rail, under vehicle, for corrosion, bad conn., etc., I'm thinking maybe a main power wire or ground both very important, power to send, ground to send back, what goes around comes around, understand ? many people overlook the ground wire, without it you got nothing, like what you have , nothing !!!! NOW, all power starts @ the battery, so don't forget , those wires need inspection also. your turnsignal switch needs adressed also, in your steering column, and the headlight switch ! take one step @ a time, use patience, check items off as you go, do easiest first, fuses, wires, replace 4-way flasher, turnsignal flasher, get the idea ? you'll get it, keep it simple , cause it is !!!!!!!

Mar 11, 2013 | Dodge Caravan Cars & Trucks

1 Answer

Turn signals not working and brake lights not working


replace brake light switch @ BRAKE PEDAL, next, replace turnsignal flasher under dash, check for blown fuse, if turn sig. still doesn't work, check turnsig., switch, & or for loose connection.

Feb 02, 2013 | 1993 Dodge Dynasty

1 Answer

Rear brake lights inoperative . The upper brake light on trunk deck works, but the lower lights in the main assemblies are inoperative.


That is a little strange, but could be just bulbs have blown. Switch must be ok if high mount works, so check bulbs first. Unless there is a separate fuse you could check that too.

Sep 24, 2009 | 2006 Cadillac CTS

2 Answers

99 JEEP BRAKE LIGHT WONT WORK..THIRD BRAKE LIGHT WORKS


on chrysler products the third brake light is run independant of the body control module, try checking the fuses that run the brake lights and see if any are faulty if not check you have voltage at the switch and a signal getting to the lights.

Aug 26, 2009 | 1997 Jeep Wrangler

1 Answer

Turn sgnals, hazzard flasher and brake lights dont work


Sounds like either a fuse or bad flasher. Do the the turnsignal lights  light up and stay on?

Dec 19, 2008 | 1995 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...