Question about 2000 GMC Sierra

1 Answer

How to reset gauges in 2000 gmc sierra - 2000 GMC Sierra

Posted by on

  • 5 more comments 
  • artmaster84 Nov 20, 2009

    I just put white gauges in my sierra and might not have got the gauge cluster needles exactly accurate and someone at "Stylin Trucks" told me I might be able to reset it smilar to the way you reset the change oil light...

  • artmaster84 Nov 20, 2009

    I installed a white gauge face and might not have got the gauge needles back quite accurate enough and someone at "Stylin Trucks" said I could reset them to fix it similar to the way that you would do to reset the change oil light....does that make sense, lol

  • artmaster84 Nov 20, 2009

    HA! okey dokey

  • yadayada
    yadayada May 11, 2010

    sorry there is no gauge reset, a gauge is much different than an oil life warning message.

  • yadayada
    yadayada May 11, 2010

    there is no such thing as a gauge reset.

  • Car Fixer May 11, 2010

    What do you mean to reset the gauges?

  • yadayada
    yadayada May 11, 2010

    reset gauges??? which ones?


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 184 Answers

Yeah, you can't reset the gauges. Just carefully put the needles back in the exact place as you took them off. Since that didn't happen I think you're out of luck... you might try to put the pointers back but it's not going to be easy to get them accurate now...

Posted on Nov 20, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How to reset DIC after battery went on 2004 GMC Sierra... no gauges work, or lights and ABS icon is on as also the battery icon...

Replacing a battery won't cause this unless you happen to hook it up wrong. In that case, check fuses, All of them. If they are all good, start replacing all those parts to include some computers.

Jan 08, 2015 | 2004 GMC Sierra

1 Answer

2000 gmc sierra 4.3 eng will start and idle but won't accelerate, it dies when pressing the accelerator.

You need to test the fuel pressure with an accurate gauge. This engine is very pressure sensitive. It has trouble even running if the pressure drops below 55PSI.

Aug 15, 2013 | 2000 GMC Sierra

1 Answer

Location of starter for 2000 GMC 3500

My question is why you replacin the postive wire?

Mar 03, 2013 | 2000 GMC Sierra 3500

1 Answer

2003 sierra gauges not working plus dash plus drains my battery any suggestions ?

Try this simple trick. Shut off every thing in your vehicle, radio, ac, lights, windshield wipers etc.Turn off the vehicle put it in park. Disconnect your battery , wait 5 minutes. Then Without turning any thing on leaving the vehicle in park reconnect the battery start the vehicle and let it Idle for approx 10 minutes. This allows your computer to reset all of your gauges. By assuring that everything is off your computer can concentrate on resetting everything correctly without missing a step . This will set your Idle and all of your Gauges. Whenever your battery is disconnected for what ever reason this step should be followed immediately upon reconnect.

Nov 16, 2012 | 2000 GMC Sierra

1 Answer

My 2000 gmc sierra will not crank once i turn the key. my light and gauge come on but the truck will not turn over. what should i be looking for to fix my problem?

check battery voltage, connections clean, voltage to battery, ground to engine block, and for signal to start wire on starter,

May 07, 2010 | 2000 GMC Sierra

1 Answer

2000 Safarri 4.3 vortec, why is the oil pressure pegged

you may have a problem with the oil pressure relief valve

Apr 09, 2010 | 2000 GMC Sierra

1 Answer

I have a 2000 GMC Sierra extended cab Z71 and my fuel gauge fluctuates.It takes it a while to register it has fuel and then it will just drop to empty then bounce back up. I was wondering what could cause...

The fuel sender is built on to the fuel pump. This happens sometimes if you run the tank low alot Try keeping the truck above 1/2 tank see if this helps otherwise you might need a new fuel pump

Dec 27, 2009 | 2000 GMC New Sierra 1500

1 Answer


your right it is a problem with them but some repair shops can send them out and have them in a few days.

Jan 24, 2009 | 2003 GMC Sierra 1500

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

75197 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides