Question about 2004 Chevrolet Monte Carlo

1 Answer

My driver side window will not close all the way

My driver side automatic window will not close all the way

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Must take door panel off somethin is jamming or broken wore out in either the scissor track mechanism that pushes the window up and down or the belt that works the mechanism

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The battery got disconected now windows dont work tried re program checked fuses nothing now what


You need to do a window reset. Its in your owners manual

This is a quote from the workshop manual

Note
? A driver side window will not fully close automatically under following the conditions:
? The battery has been disconnected during vehicle maintenance or for other reasons.
? The power window main switch connector, or driver-side power window motor connector has been
disconnected.
? Carry out the following procedure to resume operation:
1. Turn the ignition switch to the ON position.
2. Press the driver side power window main switch and fully open the driver side window.
3. Pull up the driver side power window main switch to manual-up position to fully close the driver side window,
and keep holding the switch up at the position for about 2 seconds to complete initial setting.

TWO-STEP DOWN FUNCTION OPERATIVE/NON-OPERATIVE SWITCHING PROCEDURE

Note
? By following the procedure below, the two-step down function is switched to non-operative when it is
operative, and to operative when it is non-operative.

Turn the Ignition on
Within 5 sec
perform the auto open two times
perform the auto close two times

turn the ignition off and within 40 seconds and repeat the above sequence.

Repeat for all the windows.

Aug 14, 2016 | 2007 Mazda 6 2.3

1 Answer

Aston martin problems


Window going down is automatic when opening/closing doors. Try the electric plugs under driver's seat. It could be loose or the wire assembly to the door motor. Mine comes loose all the time since the car is old

Jun 26, 2014 | Aston Martin Virage Cars & Trucks

1 Answer

"automatic" window on my 2005 mustang does not


So when it doesn't seal that means the tracks the window have been falling out typically. The door panel needs to come off to inspect the tracks. And if your driver side power window doesn't work, that typically means a seperate problem located in the switch itself. It could also be the wires, so you can run a seperate wire to test the switch by running it directly to the window motor, and pressing the switch down. This can easily be done while the door panel is off so you can hit two problems at the same time.

Oct 20, 2011 | 2005 Ford Mustang

1 Answer

I woul like to know how to tighten up driver side electric window?


Both Drivers and passengers automatic windows have set screws located at the bottom of the window regulator. Assuming I understand your question correctly "how to make the window close more tightly", you will need to remove the door panel to gain access to these set screws.

May 19, 2010 | 2002 Volkswagen Cabrio

1 Answer

'04 Infiniti FX35 back driver side window does not open or close.


need to pull door panel off there is a cable that op. the window they get twisted in motor poss. need window motor..

Feb 20, 2010 | 2004 Infiniti FX35

1 Answer

Drivers side winsow will only go up to about three quarters shut.


Nope, it's a resistance problem - when the motor from the window encounters abnormal resistance/effort the safety mechanism thinks that something was caught between the frame and window so it automatically lowers it.
Check the seals for dirt or the mechanism for rust.

Dec 29, 2009 | 2000 Volkswagen Beetle

1 Answer

1998 toyota sienna window on the driver side won't go up to close


Sadly, the power windows on this van are not very robust. Worse yet, the windows will go down but not go up--except perhaps a little at a time. But eventually the motor will no longer work.

I disassembled my power window and found there was no way to replace the motor except with a (very, very expensive) factory part.

My passenger window is currently broken like this, and I disconnected the wiring to prevent anyone from operating it. I keep my passenger window very very clean because friction (like sap from the Almond tree in our front yard) wears out the automatic windows quicker.

In your case, there's no real workaround because it's the driver's window--go to the dealer and see what type of price you can get for the replacement part.

My condolences.

Apr 09, 2009 | 1998 Toyota Sienna

3 Answers

Driver's Side Window Won't Stay Up


As mentioned here, this worked for me on a 55 reg:

Disconnect the battery for 30 seconds. Then follow the calibrate instructions that can be found under "Windows" in the owner's manual. Took less than 5 minutes in all to fix.

Mar 26, 2009 | 2003 Saab 9-3

1 Answer

Drivers Door Window/Locks aren't working


driver side lock and window switch... if its all one unit... i had a 95 cherokee laredo that did that... changed the switch and it fixed my problem...

Mar 15, 2009 | 2003 Jeep Grand Cherokee

1 Answer

03 navigator Running board on driver side acts confused


There is a relay switch in each door. It is the relay in one of the the driver side doors. The switch is going bad.

Dec 22, 2008 | 2003 Lincoln Navigator

Not finding what you are looking for?
2004 Chevrolet Monte Carlo Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...