Question about 1995 Chevrolet Lumina

1 Answer

Instrument panel light is out how do i fix ths?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

Depending upon which light is out. You will have to remove the instrument cluster from the dash, disconnect the electrical connectors from it and then you can replace the defective bulb. When you first remove the instrument cluster while your connectors are still connected to it, turn your lights on for a second this may help you identify the bad bulb. If you replace the bulb with a new one and it still doesn't work then you have another problem. The circuit board to the cluster could be bad. But once you remove the bulb you will see if it's blown or not. Hope that helps, gl.

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Buick LeSebre instrument panel lights


Take the instrument cluster out of the vehicle an take it a part an replace the blubs .If all your gauges work you need to watch that part . How to Fix GM Speedometer Instrument Lighting

Mar 21, 2017 | 2002 Buick LeSabre

1 Answer

How to change dash board light


You need to remove the instrument cluster by removing the two screws on the top of the cluster. and then pulling out the lower rim to undo a couple of clips along the that border.

Jun 05, 2014 | 2003 Honda CR-V

1 Answer

Code P1780 all lights work just trouble light on instrument panel


P1780 TOYOTA - Park Neutral Position Switch Fault

I would suggest you replace that switch on the transmission.

Jun 14, 2012 | Cars & Trucks

1 Answer

How to fix the light in the instrumental panel on my 1999 ford tauras


Most auto instrument panels are back-lit with a light bulbs, that just twist in/out. They are very simple to replace, its getting to the instrument cluster that can be the bear. Look on-line on how to remove your instrument cluster and get to your bulb and you can get it fixed. I would say on a 1 to 10 difficulty scale its probably a 4.5, if you did it yourself. Good Luck

Jun 07, 2012 | 1999 Ford Taurus

1 Answer

My tail lights and the lights on my instrument panel went out.


The first thing is check your manual for fuse locations, then check all the fuses. because if all the fuses are good then its a wire harness problem
and you will either have to take it to a dealer or a shop that specializes
in electrical.

Feb 13, 2010 | 1992 Chevrolet Cavalier

1 Answer

My instrument panel lights come on when first


Check on the front panel where you see fuel consumption, outside temp etc that the botton that says black has not been pushed. If pushed no dash lights will come on and the panel screen for the outside temp etc will also be black. So give it a push and the lights should come back on.

Nov 05, 2009 | 1997 Saab 900

2 Answers

My instrument panel dashboard lights are out how do i fix them?


can ne 1 please help me, i disconnected my battery and then when i connected it again i noticed that my instrument panel was not lit up nor is my heater dials or my rev counter how do i fix this please please

May 04, 2009 | Chevrolet Beretta Cars & Trucks

1 Answer

98 honda accord panel lights will not turn on


Did you check the dimmer to switch? This is for a 2000 Honda Accord but this may help you: If your instrument lights have burnt out on your 2000 Honda Accord.... You may have another problem!!! While the dealer fixes this recall, they should replace your burnt out bulbs. 2000 Honda Accord Recall ID from NHTSA: 04V256000 Auto Recall Date: 06/07/2004 Vehicle Component: INTERIOR LIGHTING Estimated Vehicles Affected: 19572 2000 Honda Accord Defect Summary: ON CERTAIN PASSENGER VEHICLES, THE DIMMER CONTROL FOR THE INSTRUMENT PANEL LIGHTS COULD FAIL DUE TO HEAT BUILDUP. Defect Consequence: IF THIS OCCURS, THE INSTRUMENT LIGHTS MAY FAIL AND, AT NIGHT, THE DRIVER MAY NOT BE ABLE TO SEE THE INSTRUMENT PANEL GAUGES, SUCH AS THE SPEEDOMETER. Remedy: DEALERS WILL REPLACE A MULTIPLEX CONTROL UNIT FOR THE INSTRUMENT PANEL LIGHTS. OWNER NOTIFICATION BEGAN JUNE 16, 2004. OWNERS SHOULD CONTACT HONDA AT 1-800-999-1009. Notes: AMERICAN HONDA MOTOR CO., P36

Nov 25, 2008 | 1997 Honda Odyssey

2 Answers

1998 Dodge Grand Caravan. Whenever the ABS warning light comes on, there seems to be some sort of short that causes the rest of the instrument panel to die. No illumination, no gages working. When the ABS...


I had the same problem. Abs light would come on and I would lose all dash instruments. Hit a bump on the road and abs light would go off and dash would come back on. What I did to fix problem, lol I slaped the dash just to the right of instrument panel and it all came back to life. There seems to be a short there, and I slaped it back 3 times in a week and now for the last month it has stayed on.

Jul 31, 2008 | Dodge Caravan Cars & Trucks

1 Answer

Gas gauge no longer works


The light behind myRemove the cluster bezel from the instrument panel. See Cluster Bezel in this group for the procedures.
Remove the four screws that secure the instrument cluster to the instrument panel Instrument Cluster Remove/Install
Pull the instrument cluster rearward to disengage the two self-docking wire harness connectors
NOTE: The instrument cluster has two self-docking wire harness connectors that will be automatically aligned with, and connected to the instrument panel wire harness when the cluster is installed in the instrument panel.
Remove the instrument cluster from the vehicle.
Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N·m (20 in. lbs.)
when I turn my headlights on. All the other gauges are lit, but not the gas gauge. How do I get in there to replace the bulb and fix this? Or is it a fuse problem? I have a 1998 jeep scout Thanks

May 14, 2008 | 2007 Jeep Scout

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...