Question about 1992 Honda Accord

2 Answers

Can't locate drain plug for radiator on 1992 Honda Accord

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,359 Answers

The textbook method is to remove the drain plug on the bottom of the radiator.

Most drain plug is make of inexpensive nylon/plastic and it may fall apart while you turn it.

The professional method is to loosen the lower radiator clamp and drop to lower radiator hose.

Drain the coolant onto a large drain pan and recycle the coolant

===

I just did a FREE write up on air purge from coolant system and how to detect initial state of blown head gasket at the Fixya tip selection.

Click HERE

or follow link below.

http://www.fixya.com/cars/r3582329-how_to_inspectdiagnose_and_repair_minor_

Posted on Dec 06, 2009

Testimonial: "Thanks for the info. We did locate the drain plug...a cap of some sort had fallen down and rested on the drain plug which made it impossible to find."

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 399 Answers

Hi its best to jack the motor to do this its located on the bottom of the rab and looks like a wing nut dont forget to undo the rad cap and make sure its not hot would you please rate this answer good luck

Posted on Nov 20, 2009

Testimonial: "Thanks for the info"

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4793 Answers

SOURCE: I need to know how

it aint got one,you have to take off the bottom hose clip for the radiator.

Posted on Jan 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the shift solenoids on transmision located 1992 honda ccord


Solenoids are located on the right front of engine (top of ******) just below the upper radiator hose.

Nov 08, 2011 | 1992 Honda Accord

1 Answer

Where can I locate a thermostact in a 1992 honda accord?


Follow the upper radiator hose to the motor. It should lead you to the housing where the thermostat is located inside.

Sep 16, 2011 | 1992 Honda Accord

1 Answer

I need to know how to locate the radiator drain plug on my 1991 Honda Accord LX please.


it aint got one,you have to take off the bottom hose clip for the radiator.

Jan 23, 2011 | Honda Accord Cars & Trucks

1 Answer

My daughters 1992 honda accord sedan water temp indicator ( inside the car show no movement and stays on the c. like to know troubleshooting procedures and location of the parts that may be causing the...


The coolant temperature gauge switch is either bad or has a corroded electrical connection. It's located on the housing where the upper radiator hose is connected to the engine.

Jan 20, 2011 | 1992 Honda Accord

1 Answer

Where on my 1992 Honda accord LX standard transmission is the speed sensor located?


Under your thermostat housing but on the transmission. Two 10mm bolts hold it on and there is a plug on it. If you don't know where the therm housing is, follow the lower radiator hose from the the bottom of your radiator to where it goes into the engine.

Jan 03, 2011 | 1992 Honda Accord

1 Answer

I need to know where the thermostat is located on a 1992 honda accord


The thermostat is located in the housing at the end of where the lower radiator hose connects to the engine, to the left of the distributor.

Aug 24, 2010 | 1992 Honda Accord

1 Answer

Tranmission oil change


There is a drain plug on your accord for this. Run the car to reach operating temp. and remove passenger side front wheel for easier access to drain plug, which is located near the front of the wheel/tire. The drain plug is removed by inserting a 1/2 inch drive ratchet, or extension into the square recess of the drain plug, and then remove like u would a regular bolt or nut. Have a drain pan ready. Replace plug, tighten to 36 ft lbs , replace wheel, with a long thin funnel, add fluid thru dipstick opening with engine running, shift thru the gears several times to allow fluid to flow thru trans. Do not overfill, check level with car parked on level surface. To check fluid level, do NOT screw dipstick in. Let me know if u need more help/info.

Jan 04, 2009 | 1992 Honda Accord

1 Answer

Thermostat in honda accord LX 1992


The hose that goes from the radiator to the front of the motor. There are two bolts on the engne block. The thermostat is located in there.

Dec 20, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...