Question about 1997 Dodge Caravan

1 Answer

Oil light blinks and chimes when I come to stop. It stops blinking and chiming when I accelerate. I have changed the oil and know it is full.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

The oil pressure switch may need replacing or youre oil pressure is low check the oil pressure switch first if it is leaking oil at the switch this will cause the problems

Posted on Nov 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to stop the chime sound?


do you have a low on oil sensor to.I know on Mercedes you sometimes have to change both.

Dec 25, 2013 | 2004 Cadillac Escalade

2 Answers

Changed rear pads. Brake indicator on dash is still blinking and chiming. How do you reset


Is it the "brake"repair light blinking & chiming?? Or is it the "ABS" brake light blinking/chiming. Brake light should be red, ABS amber

Sep 05, 2011 | 2001 Chevrolet Tahoe

1 Answer

How do u reset oil light after changing oil


Hello Jw.
  1. Turn the ignition to ON, with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds. The reset is complete when you hear the chimes and the CHANGE OIL light goes out. However, if the light stays on and no chime is heard, you will need to repeat the reset procedure.
  3. Turn the key to OFF. If the CHANGE OIL light comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
There you are, thank you for using FixYa.

KL

Nov 10, 2010 | 2004 Pontiac Grand Am

1 Answer

Resetting after an oil change


in the fuse box is a reset button. turn ignition on but don't start vehicle , press and release the button oil change light should start blinking, press and hold the button until you here chimes or the light goes out.

Oct 27, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

The lights for the air conditioner and the circumlation light continue to blink when I turn on the car but after driving for about AN HOUR the oil light comes on and the light go off. An problem arises...


check the oil level in your engine wow that's a tough one. Check engine oil level top up with oil in low. It does sound like an electrical issue. I would check ground to the engine too. start with that ieither of those do not remedy the problem. take it to a garage.

Sep 09, 2010 | 1998 Plymouth Voyager

1 Answer

Turn off oil change light


REMOVE THE LEFT SIDE FUSE PANEL ON DRIVER SIDE.THE FUSE PANEL ON THE SIDE OF INSTRUMENT PANEL LOOK FOR A RED RESET BUTTON.WITH IGNITION SWITCH ON POSITION WITH ENGINE OFF.PRESS AND HOLD RESET BUTTON FOR 5 SECONDS.YOU HEAR A CHIME NOISE THE OIL SERVICE LIGHT WILL START BLINKING AND GO OUT THEN YOUR OIL SERVICE LIGHT IS RESET.

May 20, 2010 | 2001 Oldsmobile Alero

2 Answers

How to turn off the change oil light


turn key on. wait for chime to stop. when chime stops, fully depress and release gas pedal 3 times quickly. start engine. light should be out. if not, repeat.

Apr 05, 2010 | 2003 Oldsmobile Alero

2 Answers

Every time i get my oil changed my light stays on and i dont know how to reset it on my 2001 grand am can you help?


with the key in the on position, locate the reset button in the drivers side fuse panel,pess the button when the oil light blinks press again, should stop blinking and the chimes will stop, hope this helps

Nov 11, 2009 | 2001 Pontiac Grand Am SE

Not finding what you are looking for?
1997 Dodge Caravan Logo

702 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...