Question about 2005 Ford GT

1 Answer

I have a problem on my mondeo st tdci withthe

I have a problem on my mondeo st tdci with the engine management, abs, traction control and coil light coming on intermittantly the car looses power.just recently the car cut out all together.no fault codes have been stored any ideas.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 399 Answers

Hi check your coil first if this faulty it can cause all these problems please rate this answer good luck

Posted on Nov 20, 2009

  • gordonsim937 May 18, 2011

    hi a flashing glowplug light means there is a problem that has been logged.The loss of power is the car going into limp/mode
    its a common fault with mondeo,s tdcis i know i have on been told it could be injectors or cam/sensor or the injector metering valve I DONT THINK FORD KNOWS WHAT IS WRONG THEY JUST FLING NEW PARTS HOPING TO FIX £1200 LATER STILL NO FIX

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there no pulse at injectors on a 05 mondeo tdci


No pulse? Is the engine running? How are you measureing pulse? If the engine is running there is a pulse, if it's not running, there won't be a pulse. If TDCI is correct this is a turbodiesel
Compression Ignition.

Mar 12, 2015 | 2005 Ford Mondeo

1 Answer

Why would engine light,cruise control and abs light come on?


hello,do post your DTC'S,(diagnostic trouble codes) and may be i can help.many modern vehicles spring up a multitude of warning icon's on the dashboard,much to the alarm of it's owner,however,often it can be as simple as a dirty wheel speed sensor,which fails to provide the necessary information to the main (ABS/TRACTION control unit) and so then will inhibit the cruise control,as naturally it's unable to ascertain road wheel speed,and also throw up the engine management light,as the braking/traction control systems unable to supply correct information to the main engine computer(ECU,OR PCM) electronic control unit/power control module. hope this helps,but please supply any further information that you can,regarding your DTC'S, that are read out,try to get a full print off,if at all possible, cheers.

Jun 25, 2014 | 2006 Subaru B9 Tribeca

1 Answer

Ford mondeo faults


the flashing orange light is the glowplug light that telling you there is a engine managment problem. you need to get the fault code out of the engine control module with a obd code reader to determine the cause but the common cause of the flashing glow plug warning is a air leak after the turbo charger

Jun 04, 2017 | 2006 Ford Mondeo 1.8

1 Answer

Ford mondeo faults


Get the codes read.it will tell you whats wrong. That is why it is on.

Jun 04, 2017 | 2006 Ford Mondeo 1.8

1 Answer

Engine light and ABS traction control light remain


The ABS sensor is a speed sensor also for Traction Control. This is why both lights are on , One of your front ABS sensors are bad or disconnected, or has a pinched wire.

Jan 16, 2010 | 2000 Chrysler 300M

3 Answers

Both abs and traction control light stays on also spedo not working have checked all related fuses all ok have tried to scan with both snapon solus and launch x431 niether will communicate with abs ecu but...


had my 2000 chev impala 3.8 liter ,traction control llight and abs light both go on the reset it and go right back on .so i replaced both sides of the bearing hub assembly this is connected the senser,so far so good.replaced it dec 21 2009 about 3 hours ago. because the assembly came appart when took off.

Oct 30, 2009 | 1997 Acura CL

1 Answer

Will a 2003 mondeo tdci engine fit into a 2002 mondeo tdci


They should be. The SVT Models stay Very Consistent on the Motors.

Jan 21, 2009 | 2002 Ford SVT Focus

1 Answer

2001 olds ABS and traction control sensor issue


An ABS sensor DOES affect the traction control system. Traction control uses these sensors to determine if a wheel is losing traction. A bad sensor will cause both the ABS and TRACTION lights to come on.
The CHECK ENGINE light however is going to be a seperate problem.

Jun 08, 2008 | 1999 Mazda Pickup

Not finding what you are looking for?
2005 Ford GT Logo

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...