Question about 1999 Plymouth Grand Voyager

2 Answers

My belt slips off the pulleys of my 1999 plymouth grand voyager

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Plymouth Master
  • 76,630 Answers

One of your pulleys has a bad bearing this causes the belt to run off the other pulleys.

Posted on Nov 19, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 71 Answers

Check to see if your tensioner and or idler pulleys are in alignment, if the bearings wear and get loose they can throw the belt and check the belt itself and see if it is glazed or cracked. Also check to see if all pulleys turn freely (with the belt off ). Ensure all of the mounting brackets are installed properly and all mounting bolts are tight.

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt coming off on a 99 plymout grand voyager


Verify that you have a good/correct belt then check your belt routing and alignment. Then check pulleys for faulty bearings. A free spin with the belt removed should be enough. Whats really common on those is the belt tensioner goes out

Jan 11, 2013 | Cars & Trucks

1 Answer

SURPENTINE BELT SHREDS


I think the crankshaft harmonic balancer pulley is coming apart and causing the belt to walk off and shred, it is the common reason.

Oct 16, 2012 | 1999 Plymouth Grand Voyager

1 Answer

Belt squealing on a 1998 plymouth grand voyager 3.3 liter motor


have u checked the dampner pulley,it may b coming apart. if it only squeaks with the a/c on then it's your a/c clutch pulley.

Dec 04, 2011 | 1998 Plymouth Grand Voyager

1 Answer

Trying to replace water pump on 1999 Plymouth grand voyager ...there are only three bolts on the pulley and I can't for the life of me get the damn pulley off. Suggestions??


Sometimes the little inner-hub rusts itself onto the pulley. I take a rubber mallet and gently rap the edge of the pulley, turn it a bit, rap it, turn it, rap it...etc...usually that quickly works.

Dec 04, 2011 | 1999 Plymouth Grand Voyager

1 Answer

Every time it rains my belt slips off


Check your belt tensioner. Is the pulley running in line with the other pullies when the belt is on? The tensioner pivot can wear and cause the pulley to run slightly out of line. This can also cause the belt to squeak.

Apr 20, 2011 | 1998 Plymouth Grand Voyager

1 Answer

The belt is squeeking , how can i fix it ?


first make sure all of the pulleys are lined up. make sure none of the devices driven buy the fan belt are siezed up. make sure tentioner is working-replace as needed. replace belt with a Goodyear Gatorback belt. This belt does a great job at getting rid of noise caused by misalignment of pulleys.

Nov 27, 2010 | 1999 Plymouth Grand Voyager

1 Answer

Throwing serpitine belt


The only way The belt could come off is due to a pulley not inline with the others or the tension pulley is bad

Sep 03, 2010 | 1999 Plymouth Grand Voyager

2 Answers

Remove belt tensioner pulley


you need a socket and a long ratchet.when the bolt tightens,it loosens the tension on the pulley. the bolt comes out in the other direction.

Oct 23, 2009 | 1999 Plymouth Grand Voyager

1 Answer

2000 plymouth grand voyager 3.3 V6, loud noise in serpentine belt area


remove belt and check the pulleys. this belt routing is odd and its very tight. i have seen many failed tensoner pulleys on these. it should spin smoothly and quiet. and grinding or bumpyness in it and i would replace it. check all pulleys while your there. they are not expensive.

good luck,
Michael

Apr 29, 2009 | Plymouth Grand Voyager Cars & Trucks

2 Answers

Automatic belt tensionor


Same tensioner or a new one?

Jun 16, 2008 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
1999 Plymouth Grand Voyager Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...