Question about 1992 Ford Crown Victoria

2 Answers

Transmission only goes in reverse - 1992 Ford Crown Victoria

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 172 Answers

Most likely the forward gear has broken that means you need a rebuild or a new transmission ......But thats my opinion I had the same thing happen to me and most of the time it works only in reverse that means the forward gear has broken....Hope this helps and sorry for the bad news....

Posted on Nov 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Input clutch failure. you need a transmission

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford F150 truck


auto transmission -check the reverse servo/ solenoid operation
manual transmission--check for loose selector fork for reverse , broken selector fork, stripped reverse gear, reverse gear key failure

Sep 15, 2016 | 2004 Ford F150

1 Answer

My automatic transmission when in 1st gear goes in reverse and when in reverse goes in reverse no other gears work


Most likely you have a linkage problem between the shift lever and the transmission and or the rubber bushings for that linkage are bad. It can also be the pivot point of the shift lever.

Mar 21, 2015 | Cars & Trucks

1 Answer

Is there an issue with reverse in a 46re transmission?


Check the shift linkage. It is either loose or binding and not engaging reverse. It could also be the reverse clutch pack you just rebuilt or replaced.

Feb 11, 2015 | Cars & Trucks

1 Answer

2001 Audi A4 Quattro, Reverse slips


Perhaps it is in severe pain, because you failed to identify it it by make and model!

May 15, 2017 | Cars & Trucks

1 Answer

2001 Audi A4 Quattro, Reverse slips


Servo or band worn out, o.ring gone hard or clutch pack burnt out.

May 14, 2017 | Cars & Trucks

1 Answer

1989 ford probe automatic suddenly refuses to engage into reverse.


First thing I would suggest is, you check the transmission fluid level in your car. If your fluid level is adequate, then you may need to have your transmission bands adjusted or gears and/or clutches within your transmission replaced.

After reading your question again, I am unsure if you shifter will not engage reverse or the transmission will not go into reverse. Nevertheless, if the transmission will not go into reverse, even after the car warms up, then your transmission may require a serious overhaul. Try driving your vehicle for several miles and see if it goes into reverse after warming up.

Jan 04, 2011 | Ford Probe Cars & Trucks

2 Answers

I have a code po705 my car goes reverse neutral


p0705 is the transmission range sensor which tells the ECM what gear the transmission is in neutral/reverse. Which was probably happened when you lost Drive gear

Jun 02, 2010 | 1999 Ford Windstar

1 Answer

Automatic Transmission goes into all forward


check fluid if it is a dark color and stinks transmissions probably needs rebuilt sounds like low reverse or direct clutch is bad trna will still go into loe by using forward clutch if low reverse is bad shoul be having problems with 3rd or direct in forward if forward clutch is bad

Nov 11, 2009 | 2000 Ford Ranger SuperCab

1 Answer

My ford f250 goes into reverse sometimes, other times it doesn't move at all, drive works fine. Any ideas?


Check the linkage. Set the parking brake, and examine the transmission where the linkage connects to the actuator on the transmission, and have somebody operate the shift lever. Take note if the transmission is going into reverse or not and if the actuator on the transmission is always going to the same spot.

If this test does not reveal a problem, disconnect the linkage from the actuator, and move the actuator by hand to the reverse position. you should feel it fall into the reverse position. If it does fall into the reverse position, and the transmission fails to go into reverse, then take it to a transmission shop

Jul 14, 2009 | 1993 Ford F250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

945 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...