Question about 2000 Chevrolet Astro

1 Answer

Chevy brake master cylinder leak - 2000 Chevrolet Astro

Posted by on

  • mikekb Nov 20, 2009

    If the brake master cylinder leaks in my 2000 chev astro; will the abs light come on?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Must replace master cylinder and bleed system

Posted on Nov 19, 2009

  • Chris Colucci Nov 20, 2009

    No. Always deal with the base brake system issues before attempting ABS repairs. When the ABS light is on it means that the ABS is disabled due to a fault. The Red Brake Warning light will come on if the hydraulic pressure in the base brake system is compromised.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 chevy trailblazer brake pedal going to floor already changed master cylinder brake still going to floor what could be the problem


There is a leak in the system.....the system is full of air and not bled properly.....the new master cylinder is defective

Jan 06, 2016 | Cars & Trucks

1 Answer

90 Chevy van appears to be sucking and burning brake fluid - ??


I would remove the vacuum line to your master cylinder and see if it has oil in it. If so, replace your master cylinder, the diaphragm has torn. That is the only way I see the brake fluid entering the engine.

Apr 14, 2013 | Cars & Trucks

1 Answer

Need to know where all the rubber seals are from the resovior to all brakes. power steering stop leak was put into resiovor and has damaged the rubber seal on the cap and blew the seal on the master...


Your system will have to be cleaned out. Master cylinder and all the caliper cylinders overhauled. Never put anything but brake fluid into the brake system. The seals are all insind the individual cylinders.

Sep 20, 2011 | Chevrolet 2500 Cars & Trucks

3 Answers

I went to start my car today and pushed the clutch in and it went straight to the floor on my 06 chevy cobalt ls. Can you help?


Check the fluid for the clutch. It has a small master cylinder next to the brake master cylinder. It should use brake fluid. If it is low, top it off. If it goes low again, you'll need to investigate where it's leaking from. You could have a leaking master or slave cylinder.

Feb 14, 2011 | 2006 Chevrolet Cobalt

2 Answers

My 1994 chevy k1500 is having brake probs. Pedal goes half way to the floor before beginning to engage, and then takes lots of pressure to actually stop. Could this be the brake booster or is it more...


could be booster, could be air in system, could be master cylinder. Check reservoir. If it is out, you have leaks and air in lines. If no, listen for air leaks under dash as you push pedal. If air leak, replace booster.
If no air leak, check for vacuum at hose going into booster. If no vacuum, check hose connection to intake manifold.
If no leaks and booster is good, suspect master cylinder.

Let me know if you have questions.

Sep 23, 2010 | 1994 Chevrolet K1500

2 Answers

Have a 1998 Chevy 1500. Brakes work but not well


If it's really hard and you cannot hear the booster making noise or it make alot of noise then I'd suggest getting a booster. Also MOST of the time the reason the booster goes bad is because of the master cylinder leaking fluid into the booster. If you take the master off and look into the booster and see fluid then replace both. If it has no fluid in it and the master looks good, then most likly the booster is the only problem!

Oct 29, 2009 | Chevrolet C1500 Cars & Trucks

1 Answer

1997 Chevy 1500 pickup 2wd v8, stepping down on brake bubbles master cylinder checked all lines checked all wheels and bleed ABS system, still have bubbles. Master cylinder is new. Any ideas?


One of the wheel cylinders is leaking, pulling air back into brake system and it's going back to the4 master cylinder. Look for brake fluid leaking at one of the wheel cylinders, that's where the problem is.

Oct 10, 2009 | 1997 Chevrolet K1500

1 Answer

Hello. i have a 1991 audi 100. brake padel has become mushy but there are no signs of brake fluid leak on the master cylinder or the lines. the brake pads are new. thanks


Just because there isn't an external leak in the brake system doesn't mean there isn't an internal leak in the master cylinder. A mushy pedal is usually an internal leak in the master cylinder or leaking wheel cylinders in the rear brake drums. Check the rear brake wheel cylinders for fluid leaks, if there are none or you do not have rear drum brakes, your best bet is the master cylinder :)

Sep 03, 2009 | Audi 80 Cars & Trucks

Not finding what you are looking for?
2000 Chevrolet Astro Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...