Question about 2006 Dodge Durango

1 Answer

How do I reset my low tire pressure warning light? I read the post on pushing the DISP knob on my radio and selecting tire pressure to be reset, but I'm not sure which knob is the DISP knob. Neither of the knobs on my radio will do it.

Posted by on

  • embcaptain Nov 20, 2009

    Holding down on the power knob will turn power to the radio on or off, but it does not allow selection of things to be reset.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 422 Answers

Power knob hold it down. now pay me

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Low tire pressure light wont go out


The Low Tire Pressure Indicator must be reset using the Radio. This can only be performed if you have the factory radio installed in the vehicle. This vehicle does not come with an active tire pressure management system, and as such, this light must be reset manually.
1.) Turn Radio Off 2.) Hold down disp button for 10 seconds 3.) Setup Menu should display 4.) Scroll through menu to view "Tire Pressure" (use seek buttons) 5.) Select the Tire Pressure option (Press Radio Button 1) 6.) Reset should be displayed on screen (Press disp button) 7.) Tire Pressure Light should reset

Nov 29, 2010 | 2000 Chevrolet Impala

Tip

Reset change oil soon,low tire pressure.


I will explain this better! Turn off the radio and turn the key to the on position. Press and hold DISP knob, when info comes on window press the seek arrow in tell you find what you need to reset. press the #1 button and it will beep. go back to the seek arrow and find exit. press the DISP knob again and you are done.

on Mar 16, 2009 | 2004 Chevrolet Impala

1 Answer

How to reset low tire pressure light


How to reset low tire pressure monitor, the reset is in radio controls. 1. Turn the ignition to ACC or ON and turn the radio off.
2. Press and hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.
3. Press SEE PSCAN up or down arrow to scroll through the main menue.
4. Scroll until the TIRE MON appears on the display.
5. Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.
6. Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
7. Once the monitor has been reset, scroll until the EXIT appears on the display.
8. Press the TUNE DISP button to exit programming. A chime will be heard to verify exit.

Hope helps (remember to rate this).

Nov 05, 2010 | 2001 Chevrolet Monte Carlo

2 Answers

How do I turn off the low tire pressure light?


Owners manual; or may have to go to dealership.... The info starts on page 5-66 under "Tire pressure Monitor System" hope it helps.

If you cut off the radio press and hod the the tune button until tire pressure pop up then press the tune button again and it will reset.

Aug 01, 2010 | 2002 Chevrolet Impala

1 Answer

How do i turn off the "low tire pressure' warning light


This is a fun easy one, get in your car turn the key on, turn the radio off. press the disp button (the round one below the on off one) hold it in til settings comes up on the radio display press i cant remember less im doing it 1 or 2 to scroll through to get to tire pressure, i believe its 2 because once you get to tire pressure press 1 and it will say reset and then press the disp button again and should reset. to exit just turn the radio on

Jul 31, 2010 | 2001 Chevrolet Impala

1 Answer

Low tire pressure reset selection missing from reset program


Turn ON the ignition, with the engine OFF.
Cycle the exterior lamp switch from OFF to parking lamps 3 times within 5 seconds.
Use the scan tool in order to clear the TPM DTC.
Using the RDS radio, if equipped
Adjust all tire pressures to the recommended kPa/psi. Refer to Tire Inflation Pressure Specifications in Maintenance and Lubrication, or to Tire Placard in General Information.
Turn the ignition to ACC or ON, with the engine OFF.
Turn the radio OFF.
Press and hold the DISP button until SETTINGS is displayed.
Press the SEEK up or down arrows until TIRE MON is displayed.
Press the PREV or NEXT button to enter the submenu. RESET will be displayed.
Press the DISP button, A chime will sound and DONE will be displayed.
Scroll until EXIT is displayed.
Press

Jan 12, 2010 | 2003 Chevrolet Monte Carlo

2 Answers

How do I reset the low tire warning light?


TIRE PRESSURE MONITOR RESET PROCEDURE

IMPORTANT: There are 3 different ways to reset the Tire Pressure Monitor (TPM) system. After resetting, the TPM system requires up to 30 minutes of straight line driving in each of the 3 speed ranges to complete the calibration process.If the TPM system does not reset, or DTC C1245 remains current, refer to Diagnostic System Check - Tire Pressure Monitoring. For further information, refer to Tire Pressure Monitor Description and Operation.

USING THE EXTERIOR LAMP SWITCH
  1. Adjust all tire pressures to the recommended kPa/psi. Refer to Tire Placard.
  2. Turn "ON" the ignition, with the engine OFF.
  3. Cycle the exterior lamp switch from "OFF" to parking lamps 3 times within 5 seconds.
  4. Use the scan tool in order to clear the TPM DTC.
USING THE RDS RADIO, IF EQUIPPED
  1. Adjust all tire pressures to the recommended kPa/psi. Refer to Tire Placard.
  2. Turn the ignition to "ACC" or "ON", with the engine OFF.
  3. Turn the radio "OFF".
  4. Press and hold the "DISP" button until "SETTINGS" is displayed.
  5. Press the "SEEK" up or down arrows until "TIRE MON" is displayed.
  6. Press the "PREV" or "NEXT" button to enter the submenu. "RESET" will be displayed.
  7. Press the "DISP" button, A chime will sound and "DONE" will be displayed.
  8. Scroll until "EXIT" is displayed.
  9. Press the "DISP" button to exit the TPM reset mode. A chime will sound to verify exit.
  10. Use the scan tool in order to clear the TPM DTC

Oct 11, 2009 | 2003 Chevrolet Impala

1 Answer

Changed right front tire now reads zero on dash light is on


Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 24, 2009 | 2008 Chevrolet Tahoe

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

2 Answers

Low tire pressure light is on all tire pressure is were it should be any reset procedure???2004 chevy impala ss


Turn off the radio and turn the key to the on postion. push the bottom knob ( to turn the station). Hold it in intell the info comes on. in the window it will show all the things you can reset. using the arrows to the right of the knob find tire reset the push on the station knob. this will reset it. then go back to the arrows and find end. push on the knob one more time and you will be done.( you have to make sure the radio is off). I hope this helps.

Feb 27, 2009 | 2004 Chevrolet Impala

Not finding what you are looking for?
2006 Dodge Durango Logo

931 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...