Question about 1993 Chevrolet S-10 Blazer

1 Answer

Oil cooler repair on 93 S10 4.3 - 1993 Chevrolet S-10 Blazer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 174 Answers

Does this have a separate oil cooler or do the lines run into the radiator? If they run into the radiator and it leaks oil but not coolant for the engine you can simply get an add on oil cooler. The install really easy. If you have an add on one, I wouldn't mess with trying to fix it. YOu can buy them for about 30 dollars for a good one to replace it.

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace oil; cooler on this year


  • Service and Repair
Oil Cooler Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Vehicle Lifting.
  2. Drain the engine oil and remove the oil filter housing.
89116492

  1. Loosen the oil cooler outlet (1) and the inlet (2) lines from the engine block.
  2. Lower the vehicle.
  3. Remove the intake plenum.
  4. Remove the intake manifold.
89116493

  1. Disconnect the following electrical connectors from the water crossover:
    • The engine coolant temperature sender (2)
    • The engine coolant temperature sensor (4)
84936658

  1. Remove the water crossover bolts (1).
  2. Remove the water crossover upper and lower seals (2).
84942881

  1. Loosen the upper heat shield bolts on the left side of the exhaust manifold.
89116496

  1. Remove the oil cooler outlet line from the engine oil cooler.
  2. Remove the oil cooler inlet line from the engine oil cooler.
84942883

  1. Note the positioning of the 4 seals.
84972057

  1. Position the oil feed and return,lines out of the way and secure with mechanic wire.
  2. Remove the engine oil cooler, inlet and outlet nuts (1).
  3. Remove the engine oil cooler cover bolts (2).
84942883

  1. Remove the engine oil cooler cover.
  2. Remove the engine oil cooler.
  3. Clean all sealing surfaces.
Installation Procedure
84972056

  1. Install the engine oil cooler.
  2. Apply a 2 mm (0.08 inch) bead of RTV silicone sealant, GM P/N 12346240, in the groove around the engine oil cooler cover.
  3. Install the engine oil cooler cover.
Notice: Refer to Fastener Notice in Service Precautions.
84972057

  1. Install the engine oil cooler cover bolts (2). Tighten the engine oil cooler cover bolts to 30 Nm (22 ft. lbs.).
  2. Install the engine oil cooler inlet and outlet nuts (1). Tighten the engine oil cooler inlet and outlet nuts to 20 Nm (15 ft. lbs.).
  3. Reposition the oil feed and return lines.
84942883

  1. Install the oil cooler outlet and install the oil cooler inlet lines to the engine oil cooler. Use 4 new seals.
Tighten the oil feed and return lines to 30 Nm (22 ft. lbs.).
84936658

  1. Install the water crossover:
    • Position the crossover.
    • Install the upper and lower seals (2).
    • Install the water crossover bolts (1). Tighten
Tighten the water crossover bolts to 30 Nm (22 ft. lbs.).
  1. Connect the electrical connectors at the following locations:
    • The engine coolant temperature sensor (4)
    • The engine coolant temperature sender (2)
  1. Install the intake manifold.
  2. Install the intake plenum.
  3. Raise the vehicle.
89116492

  1. Install the oil cooler outlet (1) line to the engine block. Tighten the oil cooler outlet (1) line to 30 Nm (22 ft. lbs.).
  2. Install the oil cooler inlet (2) line to the engine block. Tighten the oil cooler inlet (2) line to 30 Nm (22 ft. lbs.).
  3. Install the oil filter housing to the engine block. Tighten the oil filter housing to 45 Nm (33 ft. lbs.).
  4. Lower the vehicle.

Dec 22, 2014 | 2001 Cadillac Catera

1 Answer

Oil in coolant already tried oil cooler seals and gaskets on 93 jetta


cylinder head cracked or block cracked...get a coolent pressure tester.. pump it up to 16 lbs watch for pressure to drop.

Dec 06, 2012 | 1993 Volkswagen Jetta

1 Answer

My 93 gmc sierra 4.3 v6 has a hole in its oil cooler lines


autoanything.com

autobarn.com

rockauto.com

advancedauto.com

autozone.com

Mar 07, 2010 | GMC Sierra 1500 Cars & Trucks

3 Answers

Oil in coolant . oil cooler bad but which one


Oil generally will get into the coolant due to a headgasket leaking, or a cracked head.

You'll need to pressurize both systems (OIl & Cooling) to try & determine where the leak is coming from. .

Antifreeze in the oil can cause the pistons to sieze in the cylinders and if you've got oil in the anti-freeze, you more than likely have anti-freeze in the oil, or soon will.

Good luck.

Feb 18, 2010 | 1999 Saab 9-5

3 Answers

Engin oil in my radiator on 93 ford bronco 351w


Could be a blown head gasket. Does the vehicle overheat? Do you lose coolant? Is there water in the oil? If the oil has also gone white or grey, you most certainly have a blown head gasket.

Sep 01, 2009 | 1993 Ford Bronco

3 Answers

Oil leaking from front of the car


go with the mechanic he is there and able to see it, I would only be guessing, but this is a common leak area.

Aug 07, 2009 | 2000 Saab 9-3 Viggen

2 Answers

Engin oil cooler


oil cooler is in the radiater

Jun 19, 2009 | 1992 Daihatsu Charade

2 Answers

Several quarter sized leaks on a 93 cadillac deville?


Check the filter to make sure it the right one and on tight. Do not drive without oil. Engine will seize-up.

Mar 24, 2009 | 1993 Cadillac DeVille

Not finding what you are looking for?
1993 Chevrolet S-10 Blazer Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...