Question about 1999 Ford Econoline

1 Answer

How do i remove the oil pan off a 92 e-250 2 wheel drive with out have to pull the engine

Posted by on

  • bulldogchief
    bulldogchief May 11, 2010

    You shouldn't have to pull the engine if all you're doing is removing the oil pan.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

You may be able to get it off by removing the oil pump,

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove an oil pan off a 1998 ford 2 wheel drive with out pulling the engine


Remove the bolt that runs thru the engines motor mounts, not the ones that attach it to the engine block. Take a 2x4 and put it on a floor jack so the jack won't damage the front pulley. Raise the engine with the floor jack to get enough clearance to manuver the pan around the steering components once thw oil pan bolts have been removed. Watch the fan blades don't hit the radiator.

Mar 09, 2015 | Ford Cars & Trucks

1 Answer

How can I replace Oil pump without removing engine


I believe you will have to pull the oil pan if you can not remove it because its tight undo engine mounts on engine and tranny hook up a pulley to the engine like you were going to take the engine out and pull up on it just enough to allow engine to rise ever so slightly .

May 26, 2014 | 2000 Nissan Frontier

2 Answers

How do i remove the oil pan to get to the oil pump on a 1992 chevy s10 pickup 4x4


pick your battles cause your really going to have a ruff time of it. chassis in the way for the most part. you choose best way for you to do it.

May 24, 2014 | 1992 Chevrolet S-10

1 Answer

I need to know if i remove flywheel or ac compressor to remove oil pan


procedure is pasted below. Yes, you have to take the compressor loose if you have the 2.4 liter engine. You should never have to remove the flywheel to get the pan off, but you do have to pull the cover off the flywheel. Please let me know if you have any questions, and thanks for using FixYa.

REMOVAL & INSTALLATION

2.2L Engine
See Figure 1
  1. Disconnect the negative battery cable.
  2. Drain the crankcase. Raise and support the front of the vehicle.
  3. Unfasten the exhaust shield and disconnect the exhaust pipe at the manifold.
  4. Remove the starter motor and position it out of the way.
  5. Remove the flywheel cover.
  6. On care equipped with automatic transaxle, remove the oil filter and extension.
  7. Unfasten the oil pan bolts and remove the oil pan.


jturcotte_2045.gif

Fig. Fig. 1: Oil pan installation-1995 2.2L OHV engine shown

To install:

  1. Prior to oil pan installation, check that the sealing surfaces on the pan, cylinder block and front cover are clean and free of oil. If installing the old pan, be sure that all old RTV hae been removed.
  2. Apply a 1 / 8 in. (3mm) bead of RTV sealant to the oil pan sealing surface. Use a new oil pan rear seal and apply a thin coat of RTV sealant to the ends of the gasket down to the ears and install the pan in place.
  3. Tighten the oil pan retaining bolts to 89 inch lbs. (10 Nm).
  4. On care equipped with an automatic transaxle, replace the oil filter adapter seal and replace the oil filter adapter.
  5. Install the remaining components in the reverse order of removal.

2.3L and 2.4L Engines
See Figures 2 and 3
  1. Disconnect the negative battery cable. Raise and safely support the vehicle.
  2. Properly drain the engine oil and the cooling system into suitable containers.
  3. Remove the flywheel housing or transaxle converter cover, as applicable.
  4. Remove the right front wheel and tire assembly, then remove the right splash shield.
  5. Remove the serpentine drive belt.
  6. Unfasten the A/C compressor lower retaining bolts.
  7. Remove the transaxle-to-engine brace.
  8. Disconnect the engine mount strut bracket.
  9. Unfasten the radiator outlet pipe bolts, then remove the pipes from the oil pan.
  10. Remove the exhaust manifold brace.
  11. Unfasten the oil pan-to-flywheel cover bolt and nut.
  12. Remove the flywheel cover stud for clearance.
  13. Disconnect the radiator outlet pipe from the lower radiator hose and oil pan.
  14. Detach the oil level sensor connector.
  15. Unfasten the oil pan retaining bolts, then remove the pan and gasket. Inspect the gasket for damage. If it'e O.K. you can reuse it. No sealer is necessary.

jturcotte_2046.gif

Fig. Fig. 2: After removing the oil pan, inspect the gasket. If it's not damaged you can reuse it

To install:

  1. Position the gasket, then install the oil pan. Loosely install the retaining bolts.
  2. Place the spacer in its approximate installed location by allow clearance to tighten the pan bolt directly above the spacer. Tighten the oil pan bolts to the specifications given in the accompanying figure.

jturcotte_2047.gif

Fig. Fig. 3: Oil pan tightening specifications-2.3L and 2.4L engines

  1. Position the spacer into its proper position, then install the stud.
  2. Fasten the oil pan-to-transaxle nut.
  3. Attach the oil level sensor connector.
  4. Connect the radiator outlet pipe to the oil pan and fasten with the retaining bolts.
  5. Install the engine mount strut bracket.
  6. Fasten the transaxle-to-engine brace.
  7. Secure the A/C compressor bolts.
  8. Install the serpentine drive belt.
  9. Fasten the right splash shield, then install the wheel and tire assembly.
  10. Install the flywheel housing or transaxle converter cover.
  11. Fill the cooling system and engine crankcase with the correct type of fluids.
  12. Connect the negative battery cable.

Aug 09, 2011 | 1998 Chevrolet Cavalier

2 Answers

I have a problem oil pump and I would like to know if you have to pull the engine to get at it. My mechanic does not have a hydraulic lift.


You remove the oil pan only

If you have 4 wheel drive truck, then you remove
the center differential to remove the pan

May want a different repair shop

Mar 16, 2011 | Chevrolet Lumina Cars & Trucks

2 Answers

There are two plugs underneath when changing the oil. Which one do I pull. The front one or the rear one?


This is an 03 Mountaineer? What engine? It has two plugs on the oil pan? They did this on some of the the old 5.0 engines.

Dec 28, 2010 | 2003 Mercury Mountaineer

2 Answers

On a 2002 isuzu trooper 3.5 V6 with auto and 4wheel drive do i need to remove engine to pull oil pan? i have a loud banging in motor and need to check crankshaft & bearings


Yes, you need to pull the engine to remove the oil pan. This requires that you remove the propeller shafts and the third cross member to slide the transmission toward the rear of the vehicle. I suggest you purchase a service manual before you start this process. More than likely the rod bearing for cylinder 1 has failed. This seems to be a common problem with later model 3.5L Trooper engines because the oil pump and oil gallery do not deliver oil as efficiently to the number 1 rod bearing.

Apr 26, 2010 | 2002 Isuzu Trooper

1 Answer

Need to work on oil pan.


yes the mounts need to be removed and the engine as high off the cradle as poss, if it is a 4 wheel drive the engine must be pulled.

Jan 18, 2010 | 2001 Chevrolet Silverado 2500HD

1 Answer

Need to change oil pan


e
Cavalier, Sunfire 2001-2005

Oil Pan - Removal & Installation

2.2L (VIN 4) Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Negative battery cable Right front wheel Right inner fender splash shield Starter motor and bracket Engine mount strut bracket Oil pan
To install:


672c0b8.jpg

Fig. Exploded view of the oil pan mounting and related components-2.2L (VIN 4) engine
  1. Place a 2mm bead of RTV sealer to the oil pan sealing surface except at the rear seal mounting surface. Using a new oil pan rear seal, apply a thin coat of RTV sealer on the end down to the ears.
  2. Install or connect the following:
    Oil pan with a new gasket. Torque the nuts and bolts to 89 inch lbs. (10 Nm). Engine mount strut bracket. Torque the bolts to 49 ft. lbs. (66 Nm). Starter motor and bracket. Torque the bolts to 37 ft. lbs. (50 Nm). Right fender splash shield Right front wheel. Torque the nuts to 100 ft. lbs. (140 Nm). Negative battery cable
  3. Refill the crankcase.
  4. Start the vehicle and verify no leaks.
2.2L (VIN F) Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Engine mount strut bracket Drive belt Lower then upper AC compressor bolts Oil pan bolts Oil pan

    1c9e9c9.jpg

    Fig. Remove/Install the oil pan bolts in this sequence-2.2L (VIN F) engine
To install:
  1. Apply a 2 mm bead of RTV sealant around the perimeter of the oil pan and the oil suction port opening. Do not over apply the RTV. More than a 2 mm bead is not required.
  2. Install or connect the following:
    Oil pan and tighten the bolts to 18 ft. lbs. (25 Nm) AC compressor bolts Engine mount bracket Drive belt
  3. Refill the crankcase.
  4. Start the vehicle and verify no leaks.

2.4L Engine

  1. Before servicing the vehicle, refer to the precautions section.
  2. Drain the engine oil.
  3. Drain the cooling system.
  4. Remove or disconnect the following:
    Negative battery cable Flywheel/converter cover Right wheel Right wheel well splash shield Accessory drive belt Air conditioning compressor lower bolts Transmission-to-engine brace Engine mount strut bracket Radiator outlet pipe bolts Radiator outlet pipe from the oil pan Oil pan to the flywheel cover bolt and nut Flywheel cover stud for clearance Radiator outlet pipe from the lower radiator hose and oil pan Oil level sensor connector Oil pan
To install:
  1. Inspect the oil pan gasket; it is reusable if not damaged.
  2. Install or connect the following:
    Oil pan with the gasket. Torque the M8 bolts to 18 ft. lbs. (24 Nm) and the M6 bolts to 106 inch lbs. (12 Nm).

    2ffc5e9.jpg

    Fig. Oil pan fastener torque specifications-2.4L engine
    Oil pan to the transmission nut Oil level sensor connector Radiator outlet pipe to the lower radiator hose and oil pan Exhaust manifold brace Radiator outlet pipe. Torque the bolts to 124 inch lbs. (14 Nm). Engine mount strut bracket. Torque the bolts to 55 ft. lbs. (75 Nm). Transmission to the engine brace Air conditioning compressor lower bolts. Torque the bolts to 37 ft. lbs. (50 Nm). Accessory drive belt Right splash shield Right front wheel Flywheel/converter cover Negative battery cable
  3. Refill the crankcase.
  4. Refill the cooling system.
  5. Start the vehicle and verify no leaks.

Hope helped (remember rated this help). Good luck.

Oct 22, 2009 | 2001 Chevrolet Cavalier

1 Answer

How can i get the oil pan out on a 2001 chevy malibu?


2.2L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:

    Negative battery cable Accessory drive belt Lower A/C compressor mounting bolt Oil pan mounting bolts Oil pan


  1. Lower A/C compressor mounting bolt. Tighten the bolt to 37 ft. lbs. (50 Nm).
  2. Accessory drive belt
  3. Negative battery cable

  4. Fill the engine with oil to the correct level.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:

    Negative battery cable Accessory drive belt Lower A/C compressor mounting bolt Oil pan mounting bolts Oil pan

To install:
  1. Apply a 0.13 inch (3.5mm) bead of the GM P/N 12378521 sealant around the perimeter of the oil pan and oil suction port opening.
  2. Install or connect the following:

    Oil pan. Tighten the bolts in sequence to 18 ft. lbs. (25 Nm).

    0900c1528024bb26.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Oil pan bolt sequence-2.2L engine
    Lower A/C compressor mounting bolt. Tighten the bolt to 37 ft. lbs. (50 Nm). Accessory drive belt Negative battery cable
  3. Fill the engine with oil to the correct level.
3.1L Engine

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Evacuate and recover the A/C system.
  3. Drain the engine oil.
  4. Remove or disconnect the following:
    WARNING DO NOT disconnect the refrigerant lines or allow the compressor to hang unsupported.


    Negative battery cable Accessory drive belt Upper and lower radiator hoses Right front wheel Inner fender splash shield Antilock Brake System (ABS) Wheel Speed Sensor (WSS) electrical connector Right front ball joint from the steering knuckle Right side outer tie rod end A/C compressor bolts and move the compressor aside


    Evaporator-to-accumulator A/C line Flywheel cover Engine cradle bolts Crankshaft balancer Starter motor Oil pan

To install:

0900c1528024bb27.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Exploded view of the oil pan mounting-3.1L and 3.5L engines

  1. Install or connect the following:

Sep 02, 2009 | 2001 Chevrolet Malibu

Not finding what you are looking for?
1999 Ford Econoline Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...