Question about 1995 Jeep Grand Cherokee

1 Answer

1995 grand cherokee limited edition. I had to

1995 grand cherokee limited edition. I had to remover the hood latch assembly in order to put a water pump on my jeep. Now that it is all back together, the "hood is ajar" warning keep coming on when I get up speed, even though the hood is closed. Where is this sensor so that I can make sure it is like it should be?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Look for the electrical plung switch which is usually at the front hood corners. Trace the wire back towards the latch.

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1996 Jeep Grand Cherokee with a hood latch that does not work. The part of the latch that is operated from inside the car does not engage when I shut the hood. How can I fix this?


It sounds to me that your cable which travels fron the hood latch to the interior handle is binding or sticking. This cable can be replaced, but first check for kinks where it travels thru the frame of the car. Lubricate both the latch assembly and the cable from both ends. With the hood open, the latch inside the car should move freely back and forth and you should be able to feel the spring tension in the latch assembly. The cable is very similar to brake or shoft cables on a bicycle.

May 31, 2014 | 1996 Jeep Grand Cherokee

1 Answer

Is a 1995 jeep grand cherokee limited v8 vs. inline 6 transmission interchangeable?


No sir they will not interchange. i worked at a transmission shop for 7 years. the inline 6 has a 500 trans in it and the v8 has a 518 trans in it. the bellhousings are different.

Jan 03, 2014 | 1995 Jeep Grand Cherokee

1 Answer

I need information on the fuse box on a 1995 Jeep Grand Cherokee Limited Edition


There are two fuse boxes.The fuse box is under hood in engine compartment and one more fuse box under dash . To see fuse box diagram,click the link below:--- http://technoanswers.blogspot.com/2011/10/1995-jeep-grand-cherokee-limited.html
---------- This should help.Thanks.Helpmech.

Oct 16, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Removing and reinstalling a new headlight assembly in a 95 jeep grand cheerokee


LIGHTING Headlights REMOVAL & INSTALLATION Cherokee, Wagoneer and Comanche Models Fig. 1: Remove the top corner headlight bezel mounting screw 91076p12.jpg
Fig. 2: To access the turn signal bulb or headlight bezel mounting screws, remove the 2 turn signal housing retaining screws 91076p13.jpg
Fig. 3: After removing the turn signal housing from the headlight bezel, remove the 2 bezel mounting screws . . . 91076p27.jpg
Fig. 4: . . . then carefully pull the headlight bezel away from the headlight assembly 91076p11.jpg
Fig. 5: Remove the 4 headlight assembly retaining ring screws . . . 91076p07.jpg
Fig. 6: . . . then pull the retaining ring off of the headlight assembly 91076p06.jpg
Fig. 7: Pull the headlight assembly away from the vehicle just far enough to disengage the electrical connector from behind the headlight 91076p28.jpg
  1. Remove the headlamp bezel and retaining ring attaching screws. Remove the bezel and retaining ring.
  2. Pull the headlight out, disconnect the wire harness and remove the headlight from the vehicle.
  3. Install the headlight in the reverse order of removal.
Grand Cherokee and Grand Wagoneer Models
  1. Open the hood, reach into the engine compartment and locate the lock ring supporting the bulb assembly.
  2. Rotate the lock ring 1?8 turn counterclockwise and pull the bulb straight out from the housing. To install:
  3. Install a new bulb and position the bulb assembly in the lamp housing.
  4. Rotate the lock ring 1?8 turn clockwise to secure.
----
The Grand Cherokee will have an assembly that is fastened with bolts and screws to the body.
Get the new assembly and compare to the old one to see where to unfasten the bolts and other fasteners to aid in removing quickly.

Oct 08, 2010 | 1995 Jeep Grand Cherokee

1 Answer

I Need to manually open the hood on my 98 jeep grand cherokee limited


If your hood latch doesn't work the you can go through the grill. There will be a cable going to the latch. You will have to use a pair of pliers and pull on the cable away from the latch.

May 18, 2010 | 1991 Jeep Cherokee Limited

1 Answer

Cable broke on hood latch of 95 cherokee cant get hood to pop


first, try smacking the hood at one of the front corners while someone else pulls the release handle. or even after you've pulled on it. if that works, once open, adjust and lubricate the hood latch assembly. if it still won't open, and it's the cable and not the latch you'll have to replace it anyway, so instead of removing the grill, cut the cable behind the pull lever under the dash where you can reach it. then skin the outer cable insulation away from the actual steel cable exposing an inch or two of it. then holding the insulation and plastic housing with pliers, grab the steel cable itself with pliers and pull it to open the hood. then replace the cable. the further you can reach up under the panel the better your chances of getting past the broken part of the cable and avoid removing the grill. you might also be able to gain access from up under the car if you're lucky.

Jan 28, 2010 | 1995 Jeep Grand Cherokee

2 Answers

HOOD RELEASE CABLE CAME UNDONE AT THE LATCH ASSEMBLY. HOW DO I OPEN IT WITH OUT THE CABLE WORKING?


remove front grille then you have to fiddle about with the catch it is quite tedious but the only way or take to a dealrship

May 21, 2009 | 1999 Jeep Grand Cherokee

1 Answer

ELECTRICAL PROBLEMS - NEED WIRING DIAGRAM URGENTLY


ZJ Jeep Grand Cherokeeat 1993 to 1995, so this documents can be help: ZJ-Secc-8W-Wiring-Diagrams

Good luck!!!

May 05, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Lift Gate will not open


Compared with this reference documents: ZJ-Secc-8P-Power-Door-Locks

Good luck... and rated my help!!!

May 05, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...