Question about 1998 Jeep Wrangler

1 Answer

My window does not roll down how do i disasemble the door

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 120 Answers

I assume you have checked fuses if its power window right?

now ususlly the handle comes off with about two big phillips screws. #2 screwdriver is needed, then remove the cover for the mirror..sometimes screwed in, sometimes attached with push pins. remove the power window and door switch panel (if it has power windows) or remove the window handle, with a 90 degree pick or small screw driver, careful not to lost the clip..once removed then you can remove the screws at the bottom of the door panel..i think sometimes 3 or 4..if not, then its all held in by push pins...CAREFULLY pry behind the door panel and pull STRAIGHT out until all clips are let out and lift up on panel to remove it from window cill.

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Chevy venture passenger window won't go up or down what could it be


Have you tried the drivers door "passenger door window switch" and the passenger "door window switch" to try and roll the passenger window up?When you do try to roll it up make sure the vehicle is running as you want the most voltage to the window motor.If both door switches would not roll the window up,try the following.
With the engine running hit the up window switch on the passenger door just as you give the door a HARD FIRM RAP.The window should roll up.It may take a few tries.DO NOT roll the window back down until you have changed or dissembled the window motor for a good cleaning.Also,check for broken wires at the door hinge area on both the drivers and passenger sides,pull each wire firmly looking for a broken wire.

Mar 26, 2015 | 2004 Chevrolet Venture

1 Answer

How do I fix the driver side window?


Keep slamming the door, you will
surely have more problems

Remove the door panel,see the problem & resolve it

I would guess you have a broken window regulator to replace

Dec 05, 2014 | 2006 Hyundai Santa Fe

1 Answer

Dodge Avenger window rolls down when I start the car


Probably a bad window switch on your driver's door panel. Replace it and you should be fine.

Oct 03, 2013 | Dodge Avenger Cars & Trucks

1 Answer

2007 denali drivers side back door window will roll down but not back up


Problem should be in the rear door switch. The motor is powered from both switches.

Jul 21, 2012 | GMC Yukon Denali Cars & Trucks

1 Answer

I have a Nissan pathfinder 2007, I could roll down all my electric windows From my door but when I roll them up, my back passenger window won't roll up from my door just from that door?


It could be ether a wire problem window motor problem or its jamming up when its all the way down i have a similer problem with my passenger window on my two door blazer it works fine if i keep it up sOme but if i put it down all the way i have to take the door panle off and pry it up.

May 30, 2012 | 2007 Nissan Pathfinder Off Road

1 Answer

Door stop is broken on drivers side door and window will not go down need to know how to replace and disasemble door panel


I have owned several Mercedes and I would suggest looking for hidden covers over panel screws. After removing all fasteners, and pulling it out lift the panel to free it

Mar 20, 2011 | 1995 Mercedes-Benz S-Class

1 Answer

Passenger window rolls down window but does not roll up


replace the switch. They have parts made of plastic pressing on the contacts softing these babies up making them useless in a few years

Jan 20, 2010 | 2005 Ford Explorer

1 Answer

Rear window rolling down when ignition is turned


Most cars will do this for tem minutes, that is, let you roll down the windows even after the key is off. When you open the drivers door, it automatically cuts all power, thus stopping the procedure. Hope this helps.

Jul 06, 2009 | 2003 Cadillac CTS

Not finding what you are looking for?
1998 Jeep Wrangler Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...