Question about 1998 Chevrolet Venture Cargo

2 Answers

It's a 4 button prostart remote starter. When i push the start button, the lights go on but the van doesn't start

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 4 button and it has worked really since installing 3 years ago, today its start the motor but doesn't keep it running??????

Posted on Oct 20, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 344 Answers

Put your key in the ignition switch leave it in the off position, press the remote start button, if it starts and you did not install a transponder bypass modual in it you will require one, if you need one let me know as I stock this item

Posted on Jan 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have to install a remote starter ProStart 3271 ct J need to chima Electric to complete installation I need to connect the wire starter kill output


talk to prostart on custom car hacks.
only th
ey can help., after all its THEIR design.

when stuck far from home , dont expect some pro to figure out your custom wiring , for cheap, for fast or even possible.
dont hack cars! and save tons of grief and cash,,,,


unless its a toy. then hack away.

looks like you are already in trouble. sure.
(done many)

Sep 13, 2014 | 2001 Toyota Corolla Sedan

1 Answer

How do I reprogram Prostart remote starter/car alarm after replacing car battery?


Try turning the Prostart off, then on with the little toggle switch. Check that the hood pin switch is working as it should

Dec 03, 2013 | Cars & Trucks

1 Answer

Prostart locks and unlocks but won't start truck


Two things, Some Chev's have a security key that will only start the car when the ignition finds the ID chip in the handle of the key, when some places install remote starters they take the ID chip from the key and glue or tape it to the ignition switch so the remote starter will start the car without the key in it. I have seen some of the glue and or tape give out and the little chip falls far enough away from the ignition switch that it cannot find it and thus will not start. this is why it will work with the key in the ignition, You will have to find a service tech that knows how to remove the chip from your key handle (the plastic you turn when the key is inserted) then place it where the ignition switch can read it correctly. The ID chip is about the size of a grain of rice an is located in a small compartment in the plastic handle of the ignition key it is well hidden but a tech that has worked with this can find it. You could do the same if you get a additional key made for your car and place the key in the steering column very close to the ignition switch, but the new key can cost you in the $50 to $80 range so a tech would be a cheaper choice.
The second thing it may be is a bad isolator relay used in the remote starter, this relay is used by some more expensive remote starters to bypass the security system of the car by other means than placing the ID chip on the ignition switch. This would also need a tech to figure it out. But it should not cost more than $90 to fix by the tech, (less any cost to replace the ID chip or relay).

Nov 12, 2013 | Chevrolet Blazer Cars & Trucks

1 Answer

Prostart remote starter is in sleep mode. How to get out of sleep mode


To get an iBook out of sleep mode, you can hit any button on the computer. ----------------------------------------------------------------------------
Car Key Programmer

Nov 22, 2012 | Cars & Trucks

1 Answer

Have electrical issues with 1996 T&C van. Problem with Remote Starter and smoke and smell of burning rubber. Had to disconnect battery to get the van to stop trying to start. When i drove it home, it...


Yes it is . The remote starter wire has touch together and is wanting to start the starter, they have shorted together, The burning rubber smell is the wire melting due to the electrical short. Take the remote starter out plus the push button and reinstall using new set of wire And if you decide to install a new remote starter youll have to install a fuse in line with the positive wire.

Apr 24, 2011 | 1996 Chrysler Town & Country

1 Answer

Pontiac mini van 1998 transport, V6, 3.5L I left lights on and when I came back found my car battery died, I get boosted, since then my prostart two way 3 in 1 remote starter never work. Last winter I...


you will have to unhook your prostarter or get someone to replace its burnt from charge then after pro start is unhooked then put battery back in the turn key over.

Feb 13, 2011 | 1999 Pontiac Montana

2 Answers

No start cranks but does not fire has spark. has fuel if bypassed by relay fuses good new fuel pump a year ago has fuel replaced battery froze, has prostart remote start, been in 8 years no issues 2000...


check to see if the security light or anti theft light flashes. if that is the case, sounds like the bypass for the remote starter may be causeing the no start by tripping the anti theft system. Remove remote starter and bypass system and join any cut wires back together that may be cut for remote starter. Try starting, if theft light still flashes leave key in the on position after attempted start for 15 minutes till theft light goes solid, turn off and try again. Repeat process for three times to re-learn factory theft system in vehicle. If problem still persists, then take to your local dealer to reprogram factory theft module in the cluster.

May 31, 2010 | 2000 Chevrolet Cavalier

1 Answer

HOW TO INSTALL THE PROSTART STARTER TO 2001


First you will need a transponder bypass modual for a 2001 dodge caravan with MUX output, if your ignition key is grey, you may also need a total of 6 resistors for this van depending on what features you want and at least 2 relays, then just follow the install diagram, if you run into ant problems you know where to find me, I have done dozens of thses vans so I know what will be required, if you need the bypass modual or any of the 6 resistors let me know

Nov 05, 2009 | 2001 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...