Question about 2004 Audi A4

1 Answer

I Have an Audi a4 Quatro 2004 model. Adjust Low Beams?

I Have an Audi a4 Quatro 2004 model. The low beam headlights are too low. Point straigt down at the road. How do I adjuste them up? I found the side to side adjustment but not the up and down.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,874 Answers

There are two adjustment points (screws). For example left headlight: you will see one point near the end of left wing, at bottom side through a wing hole. This is for vertical plane headlight beam adjustment (up-down). Another one point is against water radiator side. This is for horizontal plane headlight beam adjustment (left-right).

Posted on Nov 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fixing dipped headlight issue on my 2004 audi


Check bulbs and fuse. If they are fine then check the switah. If OK it is wiring.

Dec 01, 2015 | 2004 Audi A4 Avant

2 Answers

We traded for a 1999 Audi A4 quattro and the low beam headlights don't work! Where would you start? A fuse, since it's both?


High Beams work only but low beams do not ... - CarGurus

www.cargurus.com > Questions > Saturn > S-Series
CarGurusFeb 26, 2014 - High Beams work only but low beams do not , both are out at the same time, why? ... It could be a low beam relay if your car comes so equipped. ... as-well as in minor ways (different devices in your car don't operate correctly), ... unexplainably,headlights suddenly won't operate and all kinds of other weird ...

Oct 01, 2015 | Audi Cars & Trucks

1 Answer

How do i adjust my headlights in my 2004 vovlo xc70


If you look just behind the headlight glass from the top, you will see two holes with 7mm hex head screws. These will adjust your headlights up, down, left and right.

Sep 23, 2014 | 2004 Volvo XC70

1 Answer

Headlight issue on a 99 Audi A4 1.8T


Your headlight switch has overheated and failed. It's common. The switch is $158 new and replacement requires airbag and steering wheel removal.

Apr 20, 2010 | 1999 Audi A4

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

1 Answer

Lost use of both headlights on 2000 Audi A4


Your headlight switch has failed and needs replacement - this is common on the A4. Have it replaced and you'll be good to go.

Jan 08, 2010 | 2000 Audi A4

2 Answers

2002 audi s3 zenon headlight is to low is it possible to adjust it manualy if so how


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 26, 2009 | 2005 Audi A3

1 Answer

How do I adjust the driving lights? when using low beam they point down too low.


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 04, 2009 | 2004 Saab 9-3

2 Answers

Can't adjust the height of the headlights


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 13, 2009 | 2004 Audi TT

1 Answer

No Low Beam headlights


If both your low beams are not working your headlights went out and need to be replaced.

Mar 11, 2009 | 2003 Audi A4 Cabriolet

Not finding what you are looking for?
2004 Audi A4 Logo

Related Topics:

1,136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14337 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...