Question about 2001 Land Rover Range Rover

1 Answer

I have a land Rover bottle jack that will not lift. Is there a bleed valve? Made by Corman of Italy

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Land Rover Master
  • 1,149 Answers

There are only a couple things to check on your bottle jack. If you have made sure the valve is completely closed, and there is no visible leakage, then the jack will need taken in for repair. There are shops in my area that service jacks and lifts, and can put new seals in the cylinder. If you did see signs of leakage, there is usually a small rubber plug that you can add more oil thru.

Posted on Nov 19, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2004 land rover freelander idle air control valve location?

there is 2 valves and are located on the rear of engine on the left has you look from under the hood

Oct 13, 2017 | Land Rover Cars & Trucks

1 Answer

Where is the a/c expansion valve located on 2006 range rovrer

1 - Radiator
2 - Thermostat housing
3 - Radiator bottom hose
4 - Viscous fan
5 - Water pump
6 - Radiator top hose
7 - Heater return hose
8 - Coolant supply hose
9 - By-pass hose
10 - Radiator bleed (purge) hose
11 - Bleed (purge) hose, thermostat housing
12 - 'Y' piece ejector
13 - Expansion tank
14 - Heater rail
15 - Heater unit
16 - Heater feed hose
17 - Intercooler
18 - Air cleaner
19 - Air feed hose
20 - Turbocharger
21 - Charge air supply hose
22 - Cooled charge air supply hose
23 - Exhaust manifold
24 - Engine oil cooler
25 - Feed pipe, engine oil cooler
26 - Return pipe, engine oil cooler
27 - Oil filter

Aug 22, 2016 | 2006 Land Rover Range Rover

1 Answer

Does anyone know where the cylinder bleed back orifice is located on a 97 land rover?

First you need to tell me which cylinder you are referring to and which land rover, defender, disco, rang rover. Sorry chat agen

Jan 08, 2015 | Cars & Trucks

1 Answer

Land rover self leveling problem the pump is on the back lifts very slow and the front will not lift up

what i normally do if i can hear the pump running is make a spray bottle of soapy water and start spraying the air bags and hoses of the air suspension you will see the suds foam up where ever you have an air leak

Dec 09, 2012 | 2007 Land Rover LR3 V6

1 Answer

Where is the cooling system bleed valve

cooling system bleed is the large plastic screw right on top of the coolant resevoir.

Oct 23, 2012 | 2003 Land Rover Range Rover

1 Answer

Bleeding brakes, The front brakes will not bleed out

In order to bleed the brakes on this car u need a special tool that holds the ABS Hydraulic control units pop-it valves open, without this special tool that plugs into the ABS you can't bleed the air out of the ABS control valve module, u either have to have the dealer do this or someone who has a factory equivalent of the ABS special bleeding tool, Snap-On tools most likely makes these, they are horribly expensive.

Mar 30, 2010 | 1996 Land Rover Discovery

3 Answers

Where's Tire Jack?

I'm not sure if they moved it on a Discovery 2, but on a 1998 Discovery 1, the "bottle jack" can be found by lifting the bonnet ( = "hood") and checking to the right of the radiator.

Effectively its in the engine cavity, immediately behind the left headlight. Its sort of a dull ship paint red, is held in by a velcro strap, and is used in conjunction with the bits you've already found.

Jan 31, 2010 | 1998 Land Rover Discovery

1 Answer

How do i put the (oat) coolant into the freelander 1999 model? thanks cathy

You have to put it in the (coolant reservoir) round clear bottle by on the passenger side of the engine compartment. There is no radiator cap. If you are completely replasing the coolant; you have to bleed the system by opening a black plastic bleeder screw on the heater hose black plastic elbow towards the firewall drivers side.

Oct 12, 2009 | 2002 Land Rover Freelander

1 Answer

How to bleed brakes on 1995 landrover

from the fine with the least amount of preasure to the line with the most preasure.

Feb 25, 2009 | 1995 Land Rover Discovery

1 Answer

Land Rover Range Rover

u can use a compressor to lift the car, manually insert to air pipe. if there is no leak in the system the car will stay up. but this for emergency only.

u need to send the car to workshop for proper repair.

the reason u cannot lift the car is pump is faulty, leak in the system, relay problem.

Oct 08, 2008 | 1996 Land Rover Range Rover

Not finding what you are looking for?
2001 Land Rover Range Rover Logo

Related Topics:

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

80637 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides