Question about 2002 Land Rover Discovery Series II

1 Answer

2002 TD5 is sluggish in all gears espeacially 1st gear, it is an auto 2.5

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

Could be MAFS out of range - check & replace if needed.

Or maybe the EGR valve is stuck open, sometimes you can clean them out but most of the time a new one is required.

Both common on the TD5

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 series 2 discovery TD5 auto.


Its not a tractor and i wouldnt tow with a automatic anyway as i think its dangerous as no engine braking but? now without a drive i honestly couldnt give you a concrete answer but i do suspect a worn pinion on one of the diffs or maybe something worn in the transfer box which is more than money than this vehicle is worth no doubt so put some STP additive in the diff and transfer box ,use the one for the engine oil as this will help or pump some LM grease into each unit ,or buy a new vehicle which is no doubt cheaper as if this is a big petrol engine then its a worthless old vehicle a diesel will hold its price though even more so in europe

Dec 17, 2013 | Land Rover Discovery Cars & Trucks

1 Answer

2002 Durango transmission sluggish when shifting from 1st to 2nd gear. I was told that the Transmission needs flushed and new Fluid added


Usually if the trans is acting up new fluid isn't going to change a thing, that's usually a ploy to get you to spend some money, just what I have seen.. Q: does the trans act up more or less when hot or cold, if there is a difference with temp then changing the fluid isn't going to help you, but that's my opinion, I been a dodge tech for 17 years but anything is possible with cars......

Jun 14, 2012 | 2002 Dodge Durango

1 Answer

60 series toyota cruiser has trouble changing gears only 1st 2nd gear auto


You have a stuck solenoid in the auto, The only way to fix it is to remove the solenoids and manually free them up, This means removing the oil and oil pan and removing the solenoids.

Mar 03, 2012 | Toyota LandCruiser Cars & Trucks

2 Answers

Discovery td5 auto. M & S warning lights come on and flash on dash. Loss of power therafter.


hi this problem is caused by a geatbox fault , something is causing the fault code to bring on your warning lights , in this mode the gearbox locks up and the tourqe converter takes up the drive , when you drive of it feels like you only have 3 gear , change the oil and filter in the box and make sure you have the correct level of oil in the box , very important , td5 auto 192k

Jan 13, 2011 | 2002 Land Rover Discovery Series II

1 Answer

WHAT IS VTM-4 LIGHT?


VTM-4 LIGHT is the 4x4 option you can use when your in the auto shift gears 1 and 2. When you put the shifter in 1 or 2 gear, you can push the VTM-4 button on dash and you will engage the 4 wheel drive constently. If you switch out of 1st or 2nd gear it will disengage automatically. The VTM-4 also works in reverse gear. Hope this helps.

Dec 27, 2010 | 2002 Acura MDX

1 Answer

ABS and brake light on-- transmission does not change gear


truck is in limp/safe/limited power mode its a safety due to brake problem check abs sensors the wiring,connections and clips for problems or damage if none visible have truck scanned most auto stores such as auto zone / advanced auto [check your local area]offer this service for free the trouble code will tell u what area or part is causing a problem so a repair can b made

Jul 27, 2010 | 2002 Oldsmobile Bravada

1 Answer

Will not shift out of 1st gear, auto trans


If the speedometer doesn't work, then it is your VSS (vehicle speed sensor) and if the speedometer does work then it is your TSS (turbine speed sensor). If the computer doesn't know both the vehicle and transmission speeds, it won't shift out of 1st gear.

Mar 06, 2010 | 2002 Hyundai Accent

1 Answer

Only runs in 1st and 2nd gear and reverse.


This is a fault mode in which the transmission either loses electrical power or the PCM deactivates all of the electronics. The transmission will default to max line pressure. The driver will have Reverse and 3rd, with manual 2nd available by putting the gearshift in 2 or 1 (doesn't matter). 1st, 4th, and TCC lockup will not be available. It will not hurt the car to drive it like this for short periods, but use manual 2nd to get the car moving, and be aware that the trans will generate more heat than normal while operating in limp-home mode due to increased torque converter slippage during 2nd gear starts and no lockup in 3rd gear.

Trans shifts into gear harshly, car feels sluggish off the line
, No 1st, 4th or TCC lockup available, Manual 2nd, 3rd and Reverse are only available gears, CEL is on: Transmission is either in limp-home mode or has lost electrical power. If there are lots of error codes in the PCM, check the under hood fuse that powers the transmission, and if it pops again, look for a short in that circuit like an O2 sensor harness touching exhaust. Otherwise, check PCM codes for a particular fault in the transmission causing the PCM to put it in limp-home mode.

No 1st or 4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.

Car goes into gear but feels very sluggish like the brakes are dragging, but it will roll easily (starts out in 4th gear), you manually shift to 2 to get it moving, once it's moving you put it back in OD and the car shifts 3rd to 4th on its own and locks the converter at the appropriate time: ShiftB solenoid failed: Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.

Dec 14, 2009 | 2006 Hummer H3

1 Answer

2002 DODGE NEON - POPPED OUT OF 1ST, WILL GO IN 2-4TH, NOT 5TH


You will need to have this Checked out by a Transmission shop. Inside the Top of the Tranny are slots for the Gear Selection. If one of these Gears looses a Tooth, It will Not go into Gear and the Gear will need to be Replaced.

Jan 24, 2009 | 2002 Dodge Neon

Not finding what you are looking for?
2002 Land Rover Discovery Series II Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...