Question about 1990 Ford Bronco

Open Question

Need a Ford Rotunda model 007-00019 Automotive code scanner manua

I have a Ford Rotunda Super Star Code Scanner model 007-00019 and do not have a owners manual. Can You Help?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 335 Answers

SOURCE: 2001 mustang with code P0104 the scanner says that EGR flow

P0104 code is MAF or VAF. This can cause surging and rough running. If you disconnect the maf and find that it runs a little better, you can be sure that a maf replacement is in order. Double check the code by erasing it then roadtest. If code comes back then it is a hard code.

Posted on May 07, 2009

Ad
  • 71 Answers

SOURCE: a po171 code came on my scanner i need to know

system too lean in bank 1. clean your mass airflow sensor, replace fuel filter. iff all else fails check you fuel pump.

Posted on Nov 06, 2009

  • 752 Answers

SOURCE: scanner codes 335, 543 on 1994 ford ranger 2.3L

335 crank shaft sensor,543 (Mem) Fuel pump relay or battery power feed was open.PCM is located under the instrument panel, is the brain of the EEC system

Posted on Feb 06, 2010

  • 181 Answers

SOURCE: I have a 2003 ford escape. Check engine light came

On alot of cars you must erase the code after repairs,the code is pending in the memory and can still run bad till cleared.try clearing the code

Posted on Mar 06, 2010

L Holland
  • 70 Answers

SOURCE: Trouble code P0171, P2195 Ford Focus

Sounds Like your o/2 is bad, are you burning e-8, try adding some injector cleaner/seafoam, and put a tank of preimu gas in then reset the code.

Posted on Jun 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a good but economical obd reader for a f350 diesel super duty


here you go

  1. Auto Code Readers - Amazon.ca‎

    Adwww.amazon.ca/Automotive‎ This ad is based on your current search terms. Visit Google's Why This Ad page to learn more or opt out. Shop for Auto Code Readers on Amazon. Qualified Orders Over $35 Ship Free Amazon Prime · Best selling Kindles · Daily Deals
.spell{font-size:18px}.spell_orig{font-size:15px}#mss p{margin:0;padding-top:5px}


g-img{display:block}._WCg{display:block;border:0;position:relative} Search Results

FORD F-250 SUPER DUTY Scan Tools and Code Readers - Free ...

https://www.summitracing.com/search/part...code-readers/.../ford/.../f-250-super-duty
  1. Cached
Results 1 - 10 of 17 - Find FORD F-250 SUPER DUTY Scan Tools and Code Readers and get Free Shipping on Orders Over $99 at Summit Racing!

What code reader to buy??? - Ford Powerstroke Diesel Forum

www.powerstroke.org > ... > 99-03 7.3L General Discussion
  1. Cached
  2. Similar
Mar 4, 2007 - Craw, I love my SCT...mine is tuned by Innovative Diesel, but I have heard ... Will any code reader (like the Actron one mentioned) read every ... A decent 'Scan tool' for a Ford F350 7.3 ?? 9 Jan 2012 Code Reader Can't read anything 24 May 2011 Will just Any ol' OBDII scanner work? 8 Feb 2008 code reader 1 Nov 2007 More results from www.powerstroke.org

Got Any Code Reader Recomendations? - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Diesel > 1999 - 2003 7.3L Power Stroke Diesel
  1. Cached
  2. Similar
Feb 6, 2011 - 1999 - 2003 7.3L Power Stroke Diesel. ... It looks like My brother or I need to by a code reader that will work on his 7.3 Powerstroke, my cheepo ... Best code scanner for the $? 9 Mar 2014 What' the best scan tool ???? 11 Mar 2012 Cheapest scanner to pull codes from the 7.3? 7 Feb 2012 What is a good deal for a OBDII Diesel Code Reader / Software ... 30 Oct 2009 More results from www.ford-trucks.com

AutoEnginuity - Diesel Power Products

www.dieselpowerproducts.com/m-90-autoenginuity.aspx
  1. Cached
  2. Similar
Diesel Power Products is proud to offer one of the nicest diagnostic software and ... the vehicle's diagnostic trouble codes, live vehicle sensors (including wide-band O2 ... Don't waste your time or money with simple code readers or hand-held ... AutoEnginuity Scan Tool Software SP01/SP03/SP05/SP06/SP07 Ford/Chevy. obd reader for f350 diesel super duty Google Search

Nov 15, 2016 | Cars & Trucks

3 Answers

What is a scan tool


A scan tool allows for the OBD II (On Board Diagnostics) codes to be read from the engine computer in a car. These are common electronic diagnostics tools used by automotive technicians. They are usually used when a check engine light comes on to determine the error codes associated with the check engine light.


They almost always connect via a standard plug on the divers side under the dash.


Most automotive parts supplier will check a car with complementary service to determine the codes stored in a customers automobile.

Nov 21, 2015 | Cars & Trucks

1 Answer

CLEAR TROUBLECODES 1995 AEROSTAR


The codes should be cleared with a scanner. However, on a 1995 Aerostar, we are talking about an old EEC-IV system. You cannot clear codes on that vehicle with a generic OBD code reader because it is not OBD compatible. You need to get access to a Ford "Star Tester" or an aftermarket scanner that can emulate a star tester.

Codes can also be cleared on that system by disconnecting the negative battery cable, but this is NOT the recommended procedure because disconnecting and reconnecting the battery cable can cause voltage spikes that can damage sensitive computer equipment in your vehicle. If you decide to do it this way, make sure that you leave the battery disconnected for a minimum of 15 minutes before reconnecting the cable.

May 20, 2012 | 1995 Ford Aerostar

1 Answer

Hypertech programmer tells me i have theese 3 code have reset them come back on.checked for codes with a odb2 scanner showed no codes on it.


Hello and welcome to FixYa!

If the obd reader is not updated, that's the reason why it doesn't show codes. As a first course of action, I strongly suggest that you update the obd II scanner then go for the procedure. This can help.

If the codes won't disappear, then the parts concerned will surely need replacement to resolve the issue.

Hope this helps and thank you for using FixYa! Have a good one!

Apr 12, 2011 | 2000 Ford F350 Super Duty Super Cab

1 Answer

2002 pontiac Grand Prix GT Malifuction Indicator Light Circuit.


When the light is on, the computer has detected a problem that you need to know about. You'll need to use an OBD2 code scanner for your vehicle. The scanner will tell you what the computer has detected.
You can borrow, rent or buy a code scanner from most automotive auto parts retailers... some will even help you use the scanner and interpret the results.

Mar 20, 2011 | 1999 Pontiac Grand Prix

3 Answers

What does the check engine light mean on the 92 town car.


If lit, it means that a DTC or diagnostic trouble code is stored in the computer.
Have it scanned or get the DTC interpreted by looking up the code in the service manual.

HAND-HELD SCAN TOOLS Although stored codes may be read through the flashing of the CHECK ENGINE or SERVICE ENGINE SOON lamp, the use of hand-held scan tools such as Ford's Self-Test Automatic Readout (STAR) tester or the second generation SUPER STAR II tester or their equivalent is highly recommended. There are many manufacturers of these tools; the purchaser must be certain that the tool is proper for the intended use. The scan tool allows any stored faults to be read from the engine controller memory. Use of the scan tool provides additional data during troubleshooting, but does not eliminate the use of the charts. The scan tool makes collecting information easier, but an operator familiar with the system must correctly interpret the data. Fig. 1: Super Star II tester - Ford Motor Co. 84924047.gif
Fig. 2: Inexpensive scan tools, such as this Auto Xray® , are available to interface with your Ford vehicle tccs4p11.jpg
Fig. 3: An economically friendly alternative is this Code Scanner® from SunPro. They are purchased according to manufacturer and are available at many parts stores 91054p14.jpg
Fig. 4: The Code Scanner® from SunPro has no LCD display, just a LED that will flash out the codes and an audible buzzer to alert that the test is in progress 91054p16.jpg

Oct 14, 2010 | 1992 Lincoln Town Car

1 Answer

2003 ford f350 7.3 giving p1316 code what is this a wiring problem


This indicates that there are fault codes stored the the injector driver module that need retreived, this can only be done with a scanner capable of performing a injector electrical buzz test. This code is typically ocompanied by a rough running engine. Thankyou RJ

May 31, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

I own a 2002 F 250 truck and hooked up a scanner to it and received a code P0179 fuel composition sensor circuit high input and need to know what that means. thx


Call your local Auto Zone, Kragen, Pep Boys, Checkers, or Ford. They will gladly tell you your code, what it means, otherwise search Automotive Codes.com online for what the code means.

Oct 24, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Egr problem


Hi, Eric

Lets tackle the EGR code first. Your vehicle is equipped with an electronic EGR valve, and the code is referring to an error with the pintle position. Your first port of call is to go back to whoever read the codes out and have them reset using this procedure:-

Switch off the ignition
Disconnect the wiring plug from the EGR valve
Connect the scanner
Switch on the ignition
Clear the code using the scanner.

Now this bit is VERY important:- As soon as the scanner tells you the codes are cleared, and I mean that very SECOND, switch off the ignition IMMEDIATELY, or the code will reappear.

You can then disconnect the scanner, reconnect the EGR valve, and then turn on the ignition.

If the code comes back then remove the valve and clean it, and whilst the valve is off, you may as well take the opportunity to clean out the ports where the valve was sat.

If that fails then its a new EGR valve I'm afraid!

Now for the other code, and I'm afraid that unless you have a proper scanner which gives live data then all you can really do is check the wiring for the crank sensor and then if that checks out ok then fit another sensor and see if that clears the code.

Very best regards

Geordie

Jun 19, 2008 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
1990 Ford Bronco Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...