Question about 1991 Honda Accord

1 Answer

This vehicle has power windows.I replaced the motor for the front window. It won't go up on track straight. How do you properly adjust the window? It want's to go out of the rear runner near the top.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 507 Answers

You will find that the regulator is worn out and its missguiding the window,you need to replace it and to adjust it you fit it and connect everything,with the regulator bolts loose put the window up gently and make sure the glass is all the way up and the tighten the bolts

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Glue windows


the glass in the door window is not normally glued in the regulator track but is pressed in the rubber with the use of soap which dries out and that means that the pressure of the metal is what holds the glass in place. There will be difficulties if the window guides are incorrectly adjusted and the glass is allowed to go up an angle instead of straight up.. Normally the track at the back of the door is fixed and the front track is adjustable to hold the glass correctly

Oct 11, 2013 | BMW Cars & Trucks

1 Answer

Is the power window in a 1996 firebird adjustable


The window tracks can be adjusted, but not the power motor part.

Mar 03, 2013 | 1996 Pontiac Firebird

1 Answer

VW bettle 2000 power window fell down power motor works but won't lift window drivers side


You may have a number of problems, all can be answered by removing the door pnl and inspecting. The window may have fallen out of the track, the window motor may have fallen out of the regulator, the motor's drive system may have stripped or broken, the regulator itself may have failed or broken or the window is no longer attached to the regulator. Pull the pnl and start inspecting. Good luck!

Jan 17, 2012 | Cars & Trucks

1 Answer

Front passenger side window won't go up or down .... I can hear the window motor though


The cable is broken. And unfortunately the motor track and cable is probably one whole assembly. So you need to replace it all as it is one unit.

Jul 03, 2011 | 2003 Cadillac Deville

2 Answers

My driver side window goes down fine but get stuck going up. is the motor bad or the lift regulator?


Its usually the window motor itself, quite often the window tracks and channels are dry and cause the motor to work harder and eventually tire out. If it attempts to go up then quits it usually pops the circuit breaker inside the window motor because its overworking and draws to many amps (pops breaker). It will attempt to work after a few seconds when circuit breaker cools and closes again. Apply some silicone based lube to the window tracks and channels, and try the window again. If it works you will eventually need a motor. The regulator usually displays binding condition in one specific spot when window going up or down, if its always the same spot it quits then it could be binding in the regulator.

Jan 31, 2011 | 2005 Chevrolet Monte Carlo

1 Answer

How to replace power window motor for 2003 dodge


That's unusual for a window motor to go bad, however the plastic track breaks causing the window to become inoperative. If you hear the window motor working, then the plastic geared strip is probably broken. It would be cost effective to you to first find out whether the plastic track is broken for now Chrysler sells a "generic" window track where you cut the plastic track to fit Your Vehicle. Should this be the case, then remove the door panel (a Haynes Manual would come in handy), and take out one pin in the plastic track, while supporting the Window! (smile) and remove the old track and re-install the new track.

A little secret here...buy some Mopar Speedometer Grease while buying the Window Track and grease the metal rail that the plastic track rides on. The Speedometer grease is NOT temperature sensitive, so it works well in Summer & Winter Temperatures.

Should it truly be your Window Motor, Chrysler sells a re-build kit for the Window Motor which has the gears and grease needed to replace the worn out ones in the head of the Window Motor rather than paying for a "Brand New" window motor. All of this (the plastic window track AND the Window Motor Kit), will be under $100.

I hope this helps you,
Let me know if this resolves your problem.

"00 Buck"

"Still living on the Right Side of Dirt..."

Jun 04, 2010 | 2005 Dodge Grand Caravan

1 Answer

I replaced the electric window motor and now the window seems to be "off track" as it goes up at an angle and will not go all the way up. How do I adjust the tracks so that the window goes up and down...


Its in the track of the window you will have to go back and take the window loose the pull the window and hold it in place (I use duct tape)then roll the track to the full up position and reset the glass to it.
let me know if this helps

May 14, 2010 | 1997 Oldsmobile Achieva

2 Answers

Power window


the plastic peice broke in the window that rolls up and down it has to be replaced

Nov 11, 2009 | Cars & Trucks

1 Answer

Power window problem. engauges then disenguages


Section 01-11: Glass, Frames and Mechanisms 1997 Windstar Workshop Manual REMOVAL AND INSTALLATION Door Glass and Regulator, Power Windows Removal
svw~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel (23942) and front door inside panel sound insulator (20394). Refer to Section 01-05 .
  1. Remove inside door belt weatherstrip.
  1. Remove front door window glass (21410) as described in this section.
  1. Remove two nut and washer assemblies attaching the window regulator equalizer arm bracket (23230).
  1. Remove four rivets retaining the front door window regulator base plate to door inner panel.
  1. Remove front door window regulator (23200) and front door window channel bracket (23288) from vehicle.
  1. Working on a bench, carefully bend tab flat to remove front door window regulator arm slides from front door window channel bracket.
  1. NOTE: Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket. Make sure rubber bumper is installed properly on new front door window channel bracket, if replacement is made.

    Install new front door window regulator arm plastic guides into front door window channel bracket and bend tab back to 90 degrees.


    a9ef3ee.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive (23394) are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Door Glass and Regulator, Power Windows .

  1. Install window regulator electric drive with preassembled front door window channel bracket into vehicle. Set the regulator base plate to door inner panel using base plate locator tab as a guide.
  1. NOTE: Two 1/4-20 x 1 inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (35-44 lb-in). Equivalent metric retainers may be used.

    Install four rivets to retain front door window regulator to door inner panel.
  1. Install window regulator equalizer arm bracket.
  1. Lower front door window regulator arms to access holes in door inner panel. Install front door window glass as outlined.
  1. Install inside door belt weatherstrip.
  1. Adjust front door window glass to make sure it is properly aligned with glass run. Check window for smooth operation.
  1. Install front door trim panel and front door inside panel sound insulator. Refer to Section 01-05 .


    Door Glass and Regulator
ac1dac5.gif

Item Part Number Description 1 21410 Front Door Window Glass 2 23288 Front Door Window Channel Bracket 3 23394 Window Regulator Electric Drive 4 23230 Window Regulator Equalizer Arm Bracket 5 222A00 Front Door Glass Run Latch Side Retainer 6 N621906-S36 Nut and Washer 7 N800510-S36 Screw 8 23200 Front Door Window Regulator 9 W525172-S Rivet 10 W525175-S Rivet 11 — Wire Connector (Part of 14630 Wire Assembly) A — Tighten to 7-10 Nm (62-89 Lb-In)

Apr 13, 2009 | 1997 Ford Windstar

3 Answers

The power window on my truck will come down, but won't go back up. The motor seems to be working fine. I need a diagram of all the parts so I can determine which parts need to be repaired or replaced....


Please dont replace the window motor as afformentioned. If you can hear it working properly, you need to replace the little piece that holds it to the arm that pushes the window up. If your window is tilting towards the front/nacl of the door, then you will also need the piece that holds it on the track.

Nov 11, 2008 | 2005 Ford F-150

Not finding what you are looking for?
1991 Honda Accord Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...