Question about 1996 Chevrolet C2500

1 Answer

1996 chev pickup - left rear turn signal does not work. Front turn signal is blinking fast. Have replaced bulbs and the lamp bases in taillight section. Right side is working fine. Could it be the flasher?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 117 Answers

No it can not be the flasher. if bulbs and socket is good in left rear u may have no power or ground. need to check wiring to that lamp. also fast blinking is a normal condition when you have a lamp out

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Front right turn signal flashes fast left side does not


when turn signal blink faster means there a bulb burn front or rear of car

Oct 11, 2014 | 1996 Pontiac Grand Am

2 Answers

Turn signals not working


you must fit a matching set of bulbs front and rear check the bulb contacts may need cleaned.

Dec 26, 2013 | Dodge Ram 1500 Cars & Trucks

1 Answer

2003 Jeep liberty right front turn signal


why skip RR lamp? what does IT DO? be like 1st 1st look.
dim, out, fast?

the rapid is talking to you
it means current is wrong,
shorted, or open lines. to the right.
its the wiring
if the bulbs are like 1157 brass base bulbs
why not replace them first , they can short inside,
asking online for guessing is silly, why listen to 10 examples for this.
but is cut wires.
shorted wires.
keep i mind the blinker asks funny for both opens and shorts
its a feature, that.
low current or too much.

the acid test is connect 2 TEST bulbs in parallel to the multi-function switch output right side,
blinks ok now, bingo bad lamps or bad wiring, from there to the right side.

if the hazard fails you never said????
if rigth front is dim or dead the bulb is blown or shorted
if new bulb there , then the wires are shorted.
to it.
the only help on line worth squat is how to test and use your meter.
you can, check for voltage
you can check continuity on that line (its just 1 wire)
and check for shorts on that wire to ground (lamps pulled right side to do that, lamps read 0 ohms cold)
look for collision damage RF? behind lamp sockets?
be first.
in my book.
looking is always first. sure.


I have your SM book open now, chapter 8w-50
the haz/blink module has just 2 pins, left and right out.
pin 3 on the module runs front and rear blinks, (a fact to know)
RF is BR/RD, brown -red stripe?
all comments USA on USA forum. USA car.
ok?

the right side lamp (sidemaker) only blinks turns if parks ARE oFF

Id try 2 new blinker lamps front and 1 rear.
that be first. or test the lamp on a battery , and no not get burned fingers hot wring a shorted lamp.

wish i knew
what rear did
and what both did on HAZ
out, dim or to fast.

Mar 23, 2017 | 2003 Jeep Liberty

4 Answers

Left rear turn signal does't work but blinker in car blinks rapidly, front left turn signal does work


Sounds like a burnt out bulb, that fast blink is to tell you a bulb needs replaced.

May 04, 2011 | Dodge Intrepid Cars & Trucks

6 Answers

Signal light blinking too fast


I just had that problem with my jeep cherokee and either your bulb has burned out or it is burning out. Time to replace it. Turn the signal light lever on the side that's flashing fast, get out of the vehicle and look at the front and back signal lights and replace the one that isn't blinking...hope this helps.


Feb 23, 2010 | 2000 Nissan Maxima

3 Answers

Left turn signal light flashes very fast and does not make the left rear taillight blink. I replaced the turn signal relay but still have same problem. Fuses checked out okay.


Change the left rear turn signal light bulb. It is probably burnt out! The fast blinking flasher is the clue you have a blown bulb.

Sep 24, 2009 | 1996 Dodge Neon

2 Answers

Left rear turn signal light on my 1999 chev. s10 is not working


any increase in bink speed is direcly related to a bulb being burt out.

Jun 12, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

1998 ford taurus left turn signal blinking fast


Replace the bulb that stays on and doesn't blink, if that doesn't solve the problem, let me know.

Apr 13, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...