Question about 2005 Ford Expedition
There could be air in your lines if you know how cheak your brake pads to see if there are low( if so replace the pads) fill brake fulid and bleed the brakes this should fix your problem
Posted on Nov 19, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Well, guess I don't need to tell you this is dangerous and that your front Rotors are probably trashed.
This sounds like either a bad Master cylinder or a leaking Brake booster. There can also be a bad check valve on the Vacuum line plugging into the Brake booster. There is a rather large line with a plastic fitting, sometimes a 90 degree fitting on the end and the check valve is in the plastic
You can test the Brake booster with the engine running and using an approved Brake cleaner safe for rubber and plastics. Cover the outside bottom of the hood so spray does not get on your paint. Then spray around the Booster. If the engine RPM changes, you have a leak. Save the actuating rod, and replace the Booster. Spray the check valve, if RPM changes replace it.
Now for the Master cylinder, pressure gauges can be attached to the front fluid discharge to measure if the internal pistons are sticking. But you may spend more Labor in testing, than the part is worth.
My reasons for choosing these parts as defects are that your "Brake or ABS" warning lights are not on so the problem would be before those monitoring devices. The Vacuum system is not monitored and you hear hissing. The Master cylinder is not monitored before the ABS unit.
I hope you find my solution helpful.
Posted on Dec 01, 2010
Tips for a great answer:
Jan 27, 2016 | 1989 GMC Sierra
Jul 10, 2013 | Cars & Trucks
Apr 22, 2013 | Cars & Trucks
Sep 18, 2012 | Renault Megane Cars & Trucks
Jun 27, 2012 | Cars & Trucks
1,654 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: