Question about Buick Regal

1 Answer

Hard turning left. no problem turning right.

Hard turning left. no problem turning right. fluid level full.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 117 Answers

Model year 1996-1998 buick regals had a recall pertaining to the lower pinion bearing in the steering gear causing this problem...no year supplied but if yours is 1 of these years call your local gm dealer and u might have it fixed for free :)

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turning the steering wheel sharply to the left or the right is extremely hard and noisy. but worse when in reverse and turning the wheels


Check your power steering fluid level. If it is full either your pump is bad, your rack and pinion is worn out or your belt is off.

Dec 22, 2016 | Cars & Trucks

1 Answer

1992 lexis car replaced thepowersteering pump now it won't turn at all


bleed power steering with engine off pour power steering fluid in the power steering reservoir until fluid stay at full mark on powersteering pump dip stick.wait few minutes then check powersteering fluid again if low add little more when fluid level stop dropping crank vechicle turn steering left to right with out a stop turn steering wheel all the way to the left to all way to right for minute until air bubbles leave the powersteering fluid. when steering wheel feel normal stop engine check check power steering fluid should be at full hot mark if fluid level dont drop air is out the system. dont overfill powersteering reservoir if so you will blow front seal.dont drive vechicle if steering dont feel normal have vechicle towed in garage.

Sep 15, 2012 | Cars & Trucks

1 Answer

Bleed power steering on 2008 dodge avenger


to bleed power steering, with front wheels off ground slightly with front wheels pointing straight ahead.engine off. remove power steering filler cap.add power steering until fluid level stop dropping,wait couple minutes and wait, add fluid until level stay at full cold mark on power steering cap dip stick. dont over fill.when fluid level stop dropping, start vechicle,let it idle few minutes. see if fluid level drop if so add more fluid full cold mark.then turn steering all the way to left and right with out hitting a stop.turn steering wheel several times, then turn front wheels pointing forward check power steering fluid level.if power steering fluid level stop dropping air should be out of system, if steering turning wheel dont turn smoothly and power steering fluid look light tan color air getting in the system.check all power steering lines to rack and power steering pump for leaks.be sure you replaced all the power steering lines with new o rings if not you will get a leak.if you find a leak, you need to fix the leak and bleed system again.dont drive vechicle if your steering dont feel right,have vechicle towed to a garage.

Aug 25, 2012 | 2008 Dodge Avenger

3 Answers

Power steering pump replaced, start to work ok, after 10 milles driving, steering wheel is hard, like pump is not working, under hood everything look ok.


YOU HAVE AIR IN THE POWER STEERING SYSTEM.YOU NEED TO BLEED POWER STEERING PUMP FIRST BEFORE DRIVING VECHICLE.CHECK POWER STEERING FLUID LEVEL ADD MORE POWER STEERING UNTIL REACH FULL COLD MARK..RAISE VECHICLE FRONT WHEELS OFF THE GROUND.START ENGINE LET IT IDLE WHILE TURNING STEERING WHEEL LEFT TO RIGHT NON STOP DONT LOCK OR STOP STEERING WHEEL KEEP TURNING IT SEVERAL TIMES CHECK POWER STEERING FLUID IF LOW ADD UNTIL YOU GET COLD MARK ON DIP STICK DONT OVER FILL POWER STEERING PUMP BLOW A SEAL.IF POWER STEERING FLUID LOOK TAN COLOR SYSTEM FULL OF AIR.TURN OFF IGNITION LET CAR SET FOR A WHILE CHECK FLUID LEVEL.IF STEERING WHEEL FEEL STIFF HARD TURNING DONT DRIVE CAR UNTIL YOU HAVE NORMAL STEERING.IF STILL HAVE AIR IN SYSTEM BLEED SYSTEM UNTIL AIR IS OUT.

Feb 25, 2011 | 2002 Chevrolet Avalanche

1 Answer

The power steering isn't working. The reservoir was empty and I added power steering fluid and it still very hard to steer


YOU HAVE A RUPTURE PRESSURE LINE IF YOU HAVE NO POWER STEERING FLUID IN THE POWER STEERING RESERVOIR.LOCATE LEAK THEN BLEED POWER STEERING SYSTEM BY ADDING POWER STEERING TO RESERVOIR.DONT OVER FILL BY FULL COLD MARK ON POWER STEERING DIP STICK.ADD FLUID TO RESERVOIR WAIT A 2 MINUTES.CHECK FLUID LEVEL AGAIN.WHEN POWER STEERING FLUID LEVEL STOP DROPPING.START ENGINE LET IT RUN FOR 10 SECONDS.THEN TURN OFF ENGINE CHECK POWER STEERING FLUID ADD FLUID IF FLUID LEVEL DROPS. WHEN FLUID LEVEL STOP DROPPING.SAFELY RAISE SUPPORT VECHICLE FRONT WHEELS.START ENGINE.NOW TURN STEERING WHEEL GENTLY FROM STOP TO STOP MEANING LEFT TO RIGHT DONT HOLD IN POSITION.LET THE STOP TO STOP BE QUICK.CHECK POWER STEERING FLUID AFTER YOU HAVE TURN STEERING WHEEL ABOUT 7 STOP TO STOP.WHEN FLUID LEVEL STOP DROPPING YOU AT HOT MARK ON DIP STICK BLEEDING PROCESS COMPLETE.TURN OFF ENGINE LOWER VECHICLE BACK TO GROUND WAIT ABOUT 5 MINUTES CHECK YOUR FLUID LEVEL.IF FLUID LOOKS LIKE A TAN COLOR.YOUR POWER STEERING SYSTEM FULL OF AIR.TURN OFF VECHICLE LET VECHICLE SET A LONG WHILE TO AIR BUBBLES SETTLE DOWN LOOK FOR LEAKS AROUND POWER STEERING PUMP FRONT SEAL AND CHECK FOR LEAKS AROUND POWER STEERING LINES.

Dec 01, 2010 | 1999 Oldsmobile Alero

2 Answers

My power stering is not working ok i have replace the power stering pump and i have check the sector and it is ok the car work well when it is runing but when i stop it turn hard i have check if it is air...


Power Steering Fluid Filling & Bleeding
  1. Repair the power steering system.
  2. Turn the engine OFF.
  3. Raise the vehicle so the front wheels are off the ground.
  4. Turn the steering wheel all the way to the left.
  5. Fill the power steering fluid reservoir to the FULL/COLD level and leave the cap off.
  6. Have an assistant watch the fluid in the reservoir while you turn the steering wheel fully to the right and fully to the left at least 20 times. NOTE: On systems with long return lines or fluid coolers, turn the steering wheel from lock to lock at least 40 times.
  7. Add fluid as needed to keep the fluid level at the FULL/COLD level.
  8. Install the reservoir cap and start the engine.
  9. Center the front wheels and lower the vehicle.
  10. Run the engine for about 2 minutes.
  11. Turn the steering wheel in both directions and verify correct power steering operation.

Nov 10, 2010 | 1997 Chevrolet Tahoe

2 Answers

Making a screaching noise very hard to turn,i checked the power steering fluid there was hardly any in there so i filled it up took it for a run still making a slight screaching noise and still very hard...


make sure the reservoir is full then turn the wheel hard right then hard left a few times,should clear any trapped air in system....otherwise check pump for leaks.....

Sep 18, 2010 | 2001 Hyundai Accent

2 Answers

Steering is hard to turn


If it is hard to turn in both directions check power steering pump fluid level. Also with both front wheels off the ground key on engine off, turn the tires manually at one of the front tires and turn with the steering wheel engine off. Check for binding (they will require effort to turn) you are looking for a change in effort.

Nov 23, 2009 | 1989 Toyota Camry

1 Answer

Steering wheel play


Try reaccomplishing the bleed procedures and that should help your problem!

SYSTEM BLEEDING
  1. Fill the steering pump with fluid. Operate the engine until it reaches normal operating temperature, then stop the engine.
  2. Turn the wheels to the full left and full right position to circulate the fluid. Add fluid to reservoir to maintain full level. Start the engine. Check the fluid level and add if necessary.
  3. Purge the system of air by turning the wheels from side-to-side without going to the full left or right position.
  4. Return the wheels to straight ahead position and operate the engine for 2-3 minutes, then stop the engine. Add fluid necessary. Road test the vehicle.
Please don't forget to rate!!!

May 22, 2009 | 1995 Jeep Grand Cherokee

3 Answers

Powersteering


you have air in the line so you have to turn the steering wheel left right left right with the engine running to get the air out of the line.this happens after you installed your power steering pump.good luck.my motto is try it you have nothing to lose and everything to gain.lol.i tell myself this all the time.

Jun 17, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...