Question about 2003 Dodge Grand Caravan AWD

1 Answer

The door locks dont work on the inside when u click

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Check for a blown fuse under dash on drivers side, there is a panel that comes off to reveal fuse box, as well as check under hood in fuse/relay box on drivers side by fender area. Map/label for under hood, is usually on underside of cover.

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't the rear door locks work anymore?


first is fuses are they good.?
the locks on cars are solenoids.
im guessing all ways to open it fail,
keys, key fobs, and internal controls panels?
no childern locks set (some are hidden on cars)
no drivers, panel , master lock, he pushes it and all locks freeze?
this is a general statement.
so you use a thing like a volt meter. $10 at walfart.
we check for 12vdc across the 2 solenoids.
12vdc when active is good.
0v is bad,
if you get 12v then the solenoid is bad or jammed.
if you get 0v, the controls are bad.
its that simple. and electro magnetic solenoid, is easy to test.
with any voltmeter made.
if the controls are bad we use the same method to check them.
12vdc to the switch it must be.
then you push the rear switch and 12vdc leaves this switch.
if not the switch is bad.(input good)

Jul 16, 2015 | 1995 Isuzu Rodeo

2 Answers

My drivers side rear door will not open from the inside or outside


I had exact problem Santa Fe 2007 2008 lock was stuck in locked position and door would not open from inside or out. All other doors would unlock with auto key remote. Carefully work the inside lock towards the open position as you lock and unlock the door with the remote. As you press unlock try to assist the lock to open. I did this a few times and the lock became free to the open position and all worked perfectly after this.

Feb 02, 2013 | 2007 Hyundai Santa Fe Limited

1 Answer

Dont work rear door locks


Your Tempo is equipped with early child-proof rear door locks...(cannot open from the inside when locked) Open the doors from the outside and look near the door catch for a small switch that moves back and forth...if still labeled it should show "Lock...Unlock" marks...leave on unlock for normal opening from inside. Hope this helps.

Jan 21, 2013 | 1992 Ford Tempo

1 Answer

My door locks close but they dont open


Switch may be dirty or worn out. Or the lock mechanisms themselves need to be cleaned and lubed. I would try cleaning the lock mecahnisms first.

Jan 28, 2012 | 1998 Toyota Corolla

1 Answer

The lock on the driver side sliding door was stuck unlocked. Now it stuck locked.


you should clean the locking mecanism and then lubricate with WD40. If this is a van, my van has a sliding power door on the pass side and a manual slider on the drivers. alot of times the drivers locks and dont lock like it has a mind of its own but it always works with the drivers controls. and then the next time i dont think about it and it works. now it also has child proof locks on them, a little plastic lever you slide up and down as to put in a lock position so child cant open from inside and down to allow door to open from inside. double check this. it wont unlock with the key or power? you might have to take off inner door panel to manually unlock this and get it lubed

Jan 14, 2011 | Dodge Grand Caravan Cars & Trucks

1 Answer

DRIVERS DOOR WILL NOT OPEN, WHEN OPENED FROM INSIDE WILL NOT CATC


I have this on a Passat 1998 model and it's frustrating, im at the point where all 4 doors wont unlock and the 2 front ones work with the key but need to be closed with the key again.The boot opens and closes with the remote.I removed and cleaned all four door barrels when they opened intermitently and under the passenger side footwell is the ecu for the windows&alarm which i removed and cleaned as well as soldered 2 dry joints.If i activate the fob i hear the relay in the ecu click and double click to lock and the boot lock works which indicates the electrics are ok.Doing a google there are 1000sssds of queries with passat/vw door lock problems and the main cause is dry solder joints in the door lock mechanisms in the door.I found out from the main dealer when replacing my bootlock(the old one was damaged in a theft attempt) that a new modified part was available and the same for door locks????leading me to believe this is a widespread problem.The only thing is to remove the door parts and inspect the catch and circut board for dry joints.This link may help you. http://forums.vwvortex.com/zerothread?id=1542461 copy and paste this into your browser or google the website if you dont know how.

Feb 10, 2010 | 2006 Volkswagen Passat

1 Answer

Driver side door lock won't open or lock using remote.


if it moves even a little bit when the button is pushed it wont be a fuse issue, you more than likely have a weak door lock actuator

Nov 25, 2009 | Cars & Trucks

2 Answers

Power door locks dont work


hello on the door locks not working could be a couple problems open the driver side door and were the door hinges are there is a small tube with wires in there that runs from the door into the side of the kick panel inside of the car these wires are your windowns locks and more now were the door open you will have to cut tube with a razr knife so you can see if any of the wires are broken now if there is no wires broken now the power door lock actuators inside the front right-and left door could be bad or the door look swiches this is not unlikey you can check this by removing the door panel you will see a rod or cable going from the door lock down the bottom of the door

now on the key not working that sounds like the door lock rods there that hooks to the lock on the inside of the door is off or one of the plastic clips that hold the rods has broken if it is not locking or unlocking your doors it is not unlikey for both sides to be broken you will have to remove the door panels to check

Feb 19, 2009 | 1995 Nissan Altima

1 Answer

Door locks wont unlock or lock


The electric door actuators are bad/broken so they need to be replaced its a common problem

Dec 14, 2008 | 2005 Ford F-150

1 Answer

MR2 DOOR LOCK


sounds like some one tried to break into your vehicle and jammed the door locking rod this would be the most likley guess since you said motor is still working the rod will need to be pulled out and straightened again to factory bend this is critical

and your switch is on the door panel the one that says lock unlock

May 26, 2008 | 1995 Toyota MR2

Not finding what you are looking for?
2003 Dodge Grand Caravan AWD Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...