Question about 2000 Chevrolet Venture

2 Answers

Chevrolet 2002 Venture Change Oil light is on and oil has already been. How do you reset it

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The oil light comes on every 3,000 miles or so as set by the dealer. It doesn't actually 'check' your oil. So your oil changes are probably not going to coincide with the change oil light. So you will have to reset the light on your own. The solution above is what the manual says to do, however, my venture is temperamental, and I have found that I have to press on my accelorator 5-6 times before it will reset the light.

Posted on Jan 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Turn key to on position do not start vehicle, depress gas pedal to floor three times

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is my oil filter located?


Why not go out and buy a Haynes auto repair manual for your 2002 venture at the auto parts store and read everything you really should know!

Jan 21, 2013 | 2002 Chevrolet Venture Passanger

1 Answer

SERVICE ENGINE LIGHT WILL NOT GO OUT EVEN AFTER RESETTING IT AFTER OIL CHANGE


reset your oil lamp following the manufacturers procedure, if problems turns change oil sender

Jun 18, 2010 | 2004 Chevrolet Venture Passanger

2 Answers

How to turn of the oil light when you change the oil


turn the key on
press the gas pedal to the floor 3 times with in 3 seconds
the change oil light will flash then go out

Nov 09, 2009 | 2005 Chevrolet Venture

1 Answer

Change Oil light is on and oil has already been changed how do I reset the light? Chev Venture Van 2000


pump gas pedal three times once you have turn the key to on position before starting.

Oct 03, 2009 | 2000 Chevrolet Venture

1 Answer

How do i reset change engine oil light on a 2000 chevy venture


1. With the ignition key in RUN but the engine off, fully push and release the accelerator pedal slowly three times within five seconds.

2. Turn the key to off.

IF the CHANGE ENGINE OIL light comes back on, the engine life monitor has not reset. Repeat the procedure.

I have noticed personally that I have press my accelerator 5 times. Each vehicle has it's own idiocyncracies

Sep 26, 2009 | 2000 Chevrolet Venture

1 Answer

How to reset the change oil light on a 2003 chevy silverado


Information courtesy of synthetic-direct.ca
Chevrolet Suburban/GMC Yukon XL, 2000-05 Chevrolet GMC Trucks Silverado, Sierra, 1999-05 Chevrolet Venture 2000
Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.
Best of luck.
Greg

Jul 15, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

How do i reset change engine oil 2000 model chevrolet venture


. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center. 2. When OIL is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining). 3. Turn the key to OFF. If the change engine oil message comes back on, the engine oil life monitor has not reset. Repeat the procedure

Jul 11, 2009 | 2000 Chevrolet Venture

1 Answer

I have a 2005 Venture and have not been able to reset the change engine oil light. After repeatedly pressing the trip/reset button for 2 minutes the message center was still flashing change engine oil and...


Notes ENGINE OIL LIFE SYSTEM

HOW TO RESET THE ENGINE OIL LIFE SYSTEM
The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a "CHANGE ENGINE OIL" message being turned on, reset the system.

  1. With the ignition key in "RUN" but the engine off, repeatedly push the trip/reset button until "OIL" is displayed on the Driver Information Center (DIC).
  2. Once "OIL" is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
  3. Turn the key to "OFF". If the "CHANGE ENGINE OIL" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
If this does not work you may have a problem with your instrument cluster.

Mar 22, 2009 | 2005 Chevrolet Venture

2 Answers

Oil light


If the oil light is on it's one of 2 things: You have no oil pressure, or the sending unit (also known as the oil pressure switch) is defective and is reading no pressure when there actually is normal pressure. You should always assume it means no pressure, because driving it this way will ruin the engine.

Mar 19, 2009 | 2000 Chevrolet Venture

1 Answer

How do i erase change oil light on message center after changing


I had a chevrolet truck with the same thing. You had to turn key on (do not start) and press the gas pedal to the floor 3 times and light would flash and then go out

Dec 17, 2008 | 2002 Chevrolet Venture Passanger

Not finding what you are looking for?
2000 Chevrolet Venture Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...