Question about 2002 Isuzu Trooper

1 Answer

Knocks alot is it the motor or is there a bolt in the transmision bell

Posted by on

  • therealbubba Nov 19, 2009

    does the heat shield rattle when you rev it up

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 776 Answers

Look under the car to see if there is a loose heat shield around the exhaust pipe/catalytic converter area. Look right between the front seats (under the car). The front portion normally rusts away from the bolts holding it in place. This is like a ****-shell part - the top half or bottom half vibrate against the catalytic converter (sounds like knocking). Dealer can fix for about $100. You can fix for about $5.

Get a small piece of fiber glass fabric (auto store) and fold nicely and fit betwen the loose parts. Then get 3 pieces of 10 gauge copper about 18 inches long and wrap around the entire heat shield and twist tight. This will stop the vibration and last a long time in harsh environmental conditions. Do not just drive without the heat shield. You can melt your carpeting and start fires if you ever drive on grass.

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What bolts have to be removed to drop transmission on 84 dodge 600


Wireing harness needs disconnected
Transmision lines need disconected
If 4 wheel drive then transfer case needs removed
front and rear drive shafts need removed
If you have torsion bars they need to come out.
Then if im correct there are 8 bolts on the bell housing and the transmission cross member has 4 bolts if your exhaust pipe is in the way then that also has to come out.
Dont forget to take off your shift cable
Before you can remove the transmission you will need to take off the 4 to 8 tourqe converter bolts through your inspection port or the transmission will stay locked to the flywheel and you can pull and pry all you want and not move it at all.

Nov 06, 2015 | Dodge Cars & Trucks

1 Answer

Ok its really a Chevy-----1998 suburban with 1 year old factory 383 stroker engine. Engine has great power. Noticed a rattle while coasting lately. Also a grinding noise under hard acceleration from a...


take the transmision cover plate off the bottom and check your flexplate for cracks or loose bolts between the flex plate and the torque converter..also chheck your motor mounts.. you may have a broken mount allowing the fan to rub on the shroud..

Mar 08, 2014 | GMC Sierra Cars & Trucks

1 Answer

A cannot get the top center bolt out of the bell housing into the engine block on my 4l60e transmission in my 2001 chevy silverado 4x4


to remove the upper bell housing center bolts on a 4L60E (not an E if it's 4wd by the way but we'll go with that for now)
you will have to unbolt the transmission from the crossmember and drop it down which will in turn tilt your motor back and allow you better access to those two top bolts. Put your two bottom bolts back in finger tight before you drop the transmission down though or you stand the chance of breaking the bell housing when it's tilted back. you can also use a floor jack on your crank pulley on the front of the motor. Jack up on it and the motor will tip back but not if you have the transmission bolted in place still. hope this helps

Feb 22, 2013 | Cars & Trucks

1 Answer

Bell House Bolts on a 94 Jeep Grand Cherokee


Check your motor mounts on the sides of the engine. Make sure the mount brackets on the engine block are still in place.

Dec 11, 2012 | 1994 Jeep Grand Cherokee

1 Answer

Torque converter ta


Torque converter is located in the bell houseing of the gear box (Automatic) You need to remove the inspection cover from the bottom of the bell houseing & it has several bolts attaching it to the flywheel (ring gear) of the engine. You will need to turn the motor by hand to get all those bolts. Then you have to remove the whole gearbox. then you can remove the converter from the bell houseing. MAKE SURE IGNITION IS OFF WHEN TURNING MOTOR BY HAND

Jun 16, 2012 | 1984 Chevrolet Chevy

1 Answer

I have something clinging around in my transfer case 03 Chevy silverado oil level was a little low when I drive it the clinging stop but once stopped at a stop sign or parked it starts again. When I rev...


NOTHING IN THE TRANSFER CASE ROTATES WHEN ENGINE RUNING AND IN PARK OR STOP I WOULD THINK MORE OF TRANSMISION TORQUE CONVERTER BOLTS OR FYWHELL BOLTS OR SOME FORING OBJECT IN THAT AREA

Jun 05, 2011 | 1999 Chevrolet K1500

3 Answers

All trans to engine bolts are removed. engine mounts are free, engine still won't come out. I don't know what else could possibly be keeping it from seperating. Is it absolutely necessary to remove...


YES YOU MUST SEPERATE TO GET TO FLYWHEEL
THER IS TWO DOWEL PIN ONE PER SIDE TOWADS THE TOP OF THE TRANSMISION
PART OF ENGINE BLOCK THEY OFTEN BIT AND HOLD ON GOOD IF YOU ARE SURE THAT
ALL THE BOLTS OF THE TRANSMISION ARE UNDONE YOU SHOULD PUT THE ENGINE MOUNT BOLT BACK IN PUT JACK UNDER FRONT OF ENGINE HARMONIQUE PULLEY TO
STABILIZED MOTOR THEN WITH SECOND JACK AT REAR OF TRANSMISION JACK UP TO
START THE RELEASE THEN LOWER BACK DOWN TO RELASE TOP OF TRANSMISION
THEN WITH SUTIBLE PRY BAR BETWEEN ENGINE AND TRANS PRY APART UNTIL FREE
FIRST I WOULD UNBOLT TORQUE AND PUSH BACK IN TRANSMISION AND PUT A RETAINER TO PREVENT TORQUE FROM FALLING OUT OTHERWISE YOU WILL NEED TO CHANGE THE TORQUE PUMP INPUT SEAL IT WILL LEAK IF SEPERATED

May 26, 2011 | Ford Expedition Cars & Trucks

1 Answer

Trying to get the tranny out,i have the tranny lose but it will not slid out of the piolt bearing


I just recently replaced my clutch. Make absolutely sure there isn't a bolt still in place (like a bolt for the Bell housing splash plate). Also make sure nothing is obstructing the transmision from backing out completely, including the motor mount or a bracket you may have missed. Once you're sure of those things, it should come off. I used a crow bar an pry off the housing evenly on all sides. If everything is unhooked, there's no other reason why it shouldn't come right off with a little prying.

Jul 12, 2009 | 2001 Mitsubishi Eclipse Spyder

1 Answer

Need help fitting a clutch on a VW GTI Golf


undo centre wheel hub nut 30mm/32mm, socket. undo lower wish-bone outer bolts, disconect battery,/remove starter motor,/remove transmission mounting bolts to body frame ,/ remove all surrounding bolts around bell housing transmission,/ remove clutch cable from transmission,/ remove drive shafts from centre hub and transmission,/ make sure car is standing on axle stands at front of jacking points,/use a trolley jack to suport engine sump with a piece of wood,/ slide transmission away from flywheel,/lower transmision on floor,/undo all clutch plate preasure bolts 10mm,/remove thrust bearing located on centre transmision shaft ,.also make sure if fitted speedo cable needs to be removed.new clutch plate should indicate flywheel ,without fitting clutch plate wrong way round/otherwise transmision will not bolt to engine block.,

May 17, 2009 | 1999 Volkswagen GTI

Not finding what you are looking for?
2002 Isuzu Trooper Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...