Question about 2004 Buick Rendezvous

1 Answer

My prking light says lamp out.my tail lights wont work either. i replaced all the bulbs and still says the same thing.all blinkers work brake lights.the fuses are fine.i tried everything ca=hanged the the pigtails and bulb it work for one day then back to squar one.why wont thay work.....

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 120 Answers

Well maybe the problem is further back then the replacement pigtails...perhaps a wire rubbed through somewhere and is rubbing on the body somewhere and not enough current is being exchanged to short a fuse. then perhaps you may have a controller problem too...a module that is...like a body control module.

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Acura 3.5 RL suddenly has no tail lights or tag lights. Brake, reverse and blinker all work. Checked fuses-all appear fine. Decided to replace bulbs and noticed front right marker light out so changed...


The only thing that both the brake lights and tail lights use is a ground connection. Keep in mind the warning light on the dash may be for any exterior lamp. You may need to check the sockets and grounds on all four corners of the car.

Aug 03, 2013 | 2000 Acura 3.5RL

1 Answer

Dodge dakota tail light parking light is out on driver side


those lamps have 2 filaments and one of them (the lower brightness one) is burnt out and the brighter one (brakes and blinker) still works. you need to replace that lamp

Mar 05, 2013 | Dodge Dakota Cars & Trucks

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

2 Answers

My tail lights are not working on my 2000 jetta the front lights work the break lights work and the blinkers work all inside lights work just fine


you need new bulbs in tail lights one bulb in each side has two elements one works brake other works running lights the elements in the bulb for tail lites are bad . so just replace bulbs. hope this helps.

Sep 13, 2011 | 2002 Volkswagen Jetta TDI

1 Answer

98 Chevy Tahoe, drivers side rear tail light assembly wont work, brake / turn signal. Replaced entire assembly, it worked for about 3 days then stopped working again. I need to get this fixed before I get...


I've got the same problem on 98 GMC Sierra.

I'm an electrical engineer, I checked the electrical diagrams and verified that there is no problem in the rear lamp assembly or wiring. With the light assembly unplugged, I can actually watch the blinker and brake signals operate with a voltmeter. The Tail light works OK.

It simply won't provide enough current to light the bulbs.

I'm afraid that it's melted one of a pair of normally closed contacts inside the blinker switch that feed the brake and turn separately on each side.

Sep 04, 2011 | 1998 Chevrolet Tahoe

1 Answer

On my 2003 model 2500HD Silverado, the right tail light doesn't illuminate, although the brake light actuates normally. I have the right blinker function and the back up light also works. I had power...


In those years of chevy trucks they have circuit board in the tail light assembly. You will need to replace the circuit board ( the thing the bulbs push into) you can perchase one at your local auto parts store.

Jul 08, 2011 | Chevrolet 2500 Cars & Trucks

1 Answer

The brake lights wont work. The brake light over


the break light wire on the lumina runs through the blinker switch or multifunction switch on the colum.. check there as well as at the tail light sockets. on the late 90s gm cars the sockets had a tendancy to rot away... use a test light at the brake light wire in the trunk and have a friend apply the break. if there is power then may have to get new tail lights. or replacement bulbs.

Mar 13, 2010 | 1997 Chevrolet Lumina

Not finding what you are looking for?
2004 Buick Rendezvous Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...