Question about 1990 Honda Accord

1 Answer

Car will turn over but has no spark to coil cap rotor or plugs replaced distributor and cap and coil rotor and them main relay what else can i check

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

If there is no power to the coil, then the crankshaft position sensor is most likely faulty. You can test it with an ohmmeter in the ohm setting and see if you get a good strong reading. If you get a good reading, then check power from ignition switch

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 Dodge Ram 1500 no spark alot of components changed


Are you getting spark at the output of the cap? If so its your coil wire

Jan 15, 2014 | Dodge Cars & Trucks

3 Answers

Ignition mystery! 1994 GMC Suburban 2500 5.7 mtr. No spark to spark plugs. Have spark from coil to distributor. Have changed coil wire, cap, rotor, ignition module, and coil. have 12.5 volts going to...


I guess you could have the ignition analyzed on an oscilloscope. Maybe a tech could see something then.
I always heard the only gap was the spark plug gap-the rotor has no gap-are you sure you got the correct rotor? And does it touch the top distributor cap coil wire tower?

Let us know. It is a mystery worthy of a solution.

Sep 21, 2013 | Chevrolet Suburban 2500 Cars & Trucks

3 Answers

94 Acura Integra wont Start


jump timing loosen distributor and plus or minus turn and retighten

Mar 09, 2013 | 1994 Acura Integra

2 Answers

1994 honda civic will not start. New spark plugs and new fuel filter. The car will turn but not start. I have replaced clutch safety switch as well. lots of good gas on the tank. main relay and fuel...


REPLACE DISTRIBUTOR CAP AND ROTOR.AND PLUGS WIRES.IF GETTING NO SPARK TO PLUGS.CHECK SEE IF IGNITION COIL GETTING POWER.IF NOT CHECK IGNITION FUSE.IF POWER GOING TO COIL.FAULT EITHER COIL IS OPEN OR FAULT IN THE IGNITION MODULE IN THE DISTRIBUTOR.

Aug 23, 2011 | 1994 Honda Civic

2 Answers

I have a 1998 durango, I have no spark from disturbtor but have spark from coil


Replace the distributor cap and rotor. If you have fire from the coil but not from the distributor cap, you have a bad contact point between the cap and rotor. Replace both and you should be good to go,, if the information that you have supplied is correct.

Aug 21, 2011 | 1998 Dodge Durango

1 Answer

1985 VW Cabriolet cranks fine. Timing belt intact. Was running yesterday, then just stopped. Spark to distributor, no spark out. Replaced fuel pump relay, distributor, ICM, cap and rotor. What else...


That is very interesting.If you have spark to the distributor means that the coil and a CP sensor are OK.Than you have to check ignition leeds and a spar plugs.Did you put correct rotor and a distributor cup?Check compression of the cilynders

Jun 11, 2011 | 1985 Volkswagen Cabriolet

1 Answer

1986 chevrolet celebrity i have no fire to the coil from the switch is my problem in the steering column because the column is loose and shakey


If you are not getting spark at the coil, then you're coil may need replaced. Also, pull the distributor cap and check the cap on the inside as well as the rotor. If you have not recently tuned up, then I suggest replacing the spark plugs, spark plug wired, (coil wire should come with them); the coil; distributor cap and rotor. When doing the spark plugs and wires, start with one, and replace the plug, then the wire for that plug - do this one at a time - do not take them all off at once, unless you have a book that shows the firing order. (Having a book for any vehicle is a good idea). Please let me know if you have any further questions, or need further assistance.
In addition, if this does not suffice - replace the starter relay. If this is blown, the car won't even turn over.
carsandcomps,
Guru, Premium Expert, Phone Expert @ Fixya.com

May 26, 2011 | 1986 Chevrolet Celebrity

1 Answer

86 dodge 250 v8-318 no fire at spark plug, will not start


did you change the main coil and coil wire?if so then check the ing resistor and then the computor box

Mar 20, 2009 | 1989 Dodge D150

5 Answers

1992 Honda Accord LX won't start - ignition problems


I would remove the distributor cap and crank the engine over . If the rotor does not turn , then you need to replace the timing belt. The timing belt needs to be replaced every 60 K. If the rotor turns then make sure you have spark to a spark plug. Run a compression test on each cylinder. The basics to run are compression, spark, fuel and timing.

Mar 11, 2009 | 1991 Honda Accord

3 Answers

I have a 91 accord wagan replaced motor now no spark !


sounds to me like a bad rotor, pop the dist. cap off and check the contacts inside

Feb 25, 2009 | 1991 Honda Accord

Not finding what you are looking for?
1990 Honda Accord Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...