Abs light stays on but brake pads are good. - 2003 Saturn VUE

although the ABS uses the brake system it functions independently and is comprised of mostly electrical components. Worn brake pads will not effect the abs systems function.

What you need to do is have the ABS system scanned for codes. This will give you a much clearer idea of the direction to go in order to solve the problem. Since the light comes on and stay on after you start the vehicle the ABS system has a failure in its self check. Common causes of this are bad wheel speed sensors but there are numerous other possibilities.

If you have an ohm meter you can check the resistance of all the wheel speed sensors. if one is not simular to the others than that would be a good place to start.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

brake light could be a sensor wire or the pads are worn out ,the srs light could be the wiring connections under the front seats ,the connectors need a clean or rubbish under the seat has dislodged them.Abs light coming on could be caused by the low brake pads but its doubtful more like one of the metal toothed rings is loose on the drive shaft ,also could be low on brake fluid if the pads have worn down and the fluid level has dropped

probbably a sensor is deffective or a snapped wire on the front where it moves about with the steering.
Have a nice day.

Did you bump the ABS pickup at the wheel hub when you changed the brakes? Or are the wires maybe nicked? The noise is normal and might go away depending on the brake pad type you replaced with. The ABS problem might be caused by you.

I HAVE SEEN A BAD BRAKE LIGHT SWITCH.CAUSE THE ABS LIGHT AND BRAKE LIGHT COME ON.WHEN SWITCH WAS REPLACE BOTH LIGHTS WENT OFF.

Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the traction of the car if not fixed it can effect your rev limiter slowing performance

Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

try changing your pads all round as they have sensors for each set of pads or just try and get a set of sensors