Question about 2003 Hyundai Tiburon

1 Answer

I have a 2003 Hyundai tiberon SE. Recently the

I have a 2003 Hyundai tiberon SE. Recently the front blinker quit working. I replaced the bulb it still will not light up. In the past 6 months the auto door locks will no longer work and as well the cruise sometimes has issues. The seatbelt light comes on when taking turns and sometimes blinks. Any ideas

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The bulb is not working because the fuse is probably dead. (check by the drivers leg side for the fuse box). Door locks will not work because the alarm system needs to be repaired, or replaced. I donot know what to do with the cruise control. and your seatbelt sensors need to be replaced.

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The driver side running lights don't work on my 2007 hyundai elantra. brake light, blinkers and headlights all work and the bulbs are good because they flash when i lock car with the fab. but they don't...


brake lights and blinkers use the sale filament in the bulb
the running light is the other (in a dual filament bulb)
you may have a poor connection or a break inside the bulb base.
test with a known good bulb.
the next place to look is the connector on the light switch and the joint where the running lights split off.

Sep 12, 2013 | Hyundai Motor 2003 Elantra

1 Answer

Passenger side front blinker dim and blinks fast


I would change out the dim bulb. usually blinkers blink when you have a bulb out either in the back or front blinker.if both are good then I would replace the flasher.

Jan 09, 2012 | 2003 Chevrolet TrailBlazer

1 Answer

Trying to replace my radiator in an 03 hyundai tiberon i have all the hoses disconected but the radiator still wont come out


it is still bolted to the a/c condensor in front of it. it may only have two 10mm bolts then slip out of some slots at bottom of radiator.

Jun 05, 2011 | 2003 Hyundai Tiburon

1 Answer

How to replace headlight bulb inn 2003 tiberon


Low beams are easiest to reach. Open the hood, find the locking cap behind the light housing and turn it a half turn to remove. Unplug the bulb. Disengage the spring lock holding the bulb in place and remove the bulb (be sure you don't touch the glass).

The bulb base has three small flanges that seat right into corresponding slots in the bulb housing. Seat the new bulb using these flanges, lock the bulb into place with the spring lock and replace the locking cap.

The high beams are harder to get to. You might need to pull the battery on the driver's side. The windshield washer tank on the passenger side might also give you some problems. Once you have room to maneuver, the procedure for changing the bulbs is exactly the same as for the low beams (they even use the same bulbs: H7).

Oct 04, 2010 | 2003 Hyundai Tiburon

1 Answer

Location of the Purge Control Valve for 2003 Hyundai Tiburon


There were two different engines which were installed in the 2003 Tiberon... the 2.0 liter 4 cylinder:
22c99c7.jpg

And the 2.7 Liter V6:
cb31feb.jpg

Jun 06, 2009 | 2003 Hyundai Tiburon

1 Answer

LEFT BLINKER RUNNING AT HIGH BLINK RATE


Make sure bulb replaced is the required 2 way or 1 way. If you're sure you put in the right bulb type (1 way or 2 way) 6 or 12 volt.. bulb model marked on side for replacement (Check carefully). Assuming its the right bulb type and still blinks fast, you will have to replace the socket. Sockets do get corroded and worn. Disconnect the battery, cut positive then cut negative. Wire up new socket same way using wire connectors. Tape up connections after.
Should then work.
Make sure before you do this you have the right bulbs in all sockets (front and rear) and that all lights work 1st. One failing light front rear same side can cause this problem.
Go to a scapper to get a socket.. just cut it off a wreck... take a couple of them. There cheap.
Good luck

Mar 24, 2009 | 2003 Pontiac Montana

2 Answers

Shift knob removal on 2006 tiberon se 6 speed.


I HAVE DECIDED NOT TO CHANGE IT.

BEST REGARDS,

H.M. STINE

Dec 19, 2008 | 2006 Hyundai Tiburon

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...