Question about Chrysler Sebring

1 Answer

Snap On MT2500 and Chrysler OBD2

I am having a strange problem with my Snap On MT2500 ONLY with my 2 Chryslers, both with OBD2. I can perform codes/data/ATM tests on all systems except the engine PCM. The PCM will allow me to perform ATM tests and check codes, but when I go to CODES and DATA, it tells me the usual, "turn key off, then turn key on and crank or start engine." I'll do just that, even trying a few times, but it will sit on that screen for eternity until I hit 'N' to go back to the menu. I haven't had any trouble using it for diagnostic work on OBD2 for GM products. I don't think it's the personality key (k-13) as it is still allowing me to test ALL of the other systems on the vehicle. Is there something I'm doing wrong? Something else I need to be doing to work around an MT2500 quirk? I would sure appreciate the help! Thank you for the help!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

Sounds like you may have a wire that pulled out of the DLC check that first

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

20002 dodge dakota obd/readiness driving procedures


20002? Just kidding then? This is called a OBD2 drive cycle

Follow the link for instruction for all Chrysler vehicles with OBD2 (On Board Diagnostics Generation 2) http://www.obd2.com/support/reprog/downloads/chrysler/chry-imset_procedure.pdf

Sep 28, 2016 | Dodge Dakota Cars & Trucks

1 Answer

I have a 2002 chrysler sebring shooting codes po700 po455 po442 po700 po841 po846 po732 gear2 inc ratio po731 inc ratio po733 pulled out solenoid and had a metal shaving on the magnetic end helpplease


P0700 Transmission Control System Malfunction P0445 Evaporative Emission Control System Purge Control Valve Circuit Shorted P0442 Evaporative Emission Control System leak Detected (small leak) P0841 Transmission Fluid Pressure Sensor/Switch A Circuit Range/Performance P0846 Transmission Fluid Pressure Sensor/Switch B Circuit Range/Performance P0732 Gear 2 Incorrect Ratio
Full list of the OBD2 DTC from P0700 to P0999

May 04, 2016 | Chrysler Cars & Trucks

1 Answer

My snap on scanner MT2500 won't power up, and I have plugged in to car. What could this be???


If you scanner uses pin 16 at datalink connector for voltage and there is no voltage, the scanner won't work. Pin 16 is usually fuse protected.
I don't know your year--make--model? The automotive database I use will only have info for vehicles sold in the US.

Apr 27, 2016 | Cars & Trucks

1 Answer

Obd2 code p1149


Definition of code P1149:
Acura - Primary HO2S (Sensor 1) Circuit Range/Performance Problem
BMW - HO2S 2 Bank 2 Signal Too High
Chrysler/Dodge/Jeep - Fuel Injector Group 2 Supply Voltage Circuit
Honda - Air/Fuel Ratio (A/F) Sensor (Sensor 1) Range / Performance Problem A/F sensor 03 - 020 6 of 10,or Air / Fuel Ratio Sensor (Sensor 1) Circuit Lean Range A/F sensor
Mercedes - Left Manifold pressure sensor (B28/1)Volkswagen/Audi - O2 Control (Bank 1) Out of range
Volvo - O2 Control (Bank 1) Out of range
Ford - GENERATOR 2 MONITOR CIRCUIT HIGH
Definition of code P1149

Jun 02, 2015 | Cars & Trucks

1 Answer

I have a 2001 impala with code c1233, changed right front abs sensor. code is still there after i cleared it with mt2500 snap on scanner


try to reset it by turning the car on and pulling the fuse for it. then turn the car off and replace the fuse

Sep 19, 2009 | 2001 Chevrolet Impala

1 Answer

Looking for prong on 1995 honda civic for snap on scanner mt2500


under right side of glovebox in a rubber holder. blue plug. i dont think a scanner will hook up to it.

Dec 22, 2008 | 2005 Honda Civic

1 Answer

Will not start


Have you changed the fuel filter; checked the fuel pump?

Oct 04, 2008 | 2004 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...