Question about 2003 Dodge Caravan

1 Answer

I HAVE A 2002 DODGE CARAVN 3.3L COMES UP WITH MULTIPLE CODES LEAN, WILL START IN THE AM, AFTER DRIVING AND SHUTING OFF IT IS HARD TO RESTART, ONCE IT'S STARTED THER IS POPING NOISES GOING THROUGH THE INTAKE, WHEN THE VEHICLE IS FULL IT'S NOT AS BAD AS WHEN THERE IS A 1/4 TANK OF GAS.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Sounds like fuel pump is on its way out. Lower fuel level, or even a good hot day in the sun, may also affect how far you get. With more fuel in tank, it takes longer for it to heat up and start acting up. You'll probably have proper ( or close to it ) fuel pressure in the morning because vehicle, gas & pump are cool, then as you use it, it heats up, and doesn't pump up to pressure, which would be a good time to have fuel pressure tested to be 100% sure. You may get a few more miles out of it by changing filter, but no guarantee's.

Posted on Nov 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Multiple codes on 2002 dodge durango


This many codes sounds like a wiring issue. You need to inspect all the wiring. If you have rabbits in your area, they eat wires. If not then it is likely to be a corroded or loose ground. You need to get a wiring diagram etc.

Feb 25, 2014 | 2002 Dodge Durango

2 Answers

Multiple engine codes 2002 tribute. p0171, p0174, p0300, p1401


I doubt it.
Codes 171 and 174 are for lean fuel mixtures, 300 is for random missfires which could be fuel or ignition related, and 1401 is for a problem with the EGR valve system. Now the EGR could cause the other codes if the valve is open or leaking when it should be closed.
The EGR valve and sensor would need to be tested first.

Jan 29, 2013 | 2002 Mazda Tribute

2 Answers

Multiple erroneous diagnostic code readings.


Contact a Mitsubishi dealer for advise , could need a new ecu , hard to say without seeing vehicle

Jun 05, 2017 | 2002 Mitsubishi Eclipse Spyder

1 Answer

Chrysler Crossfire will crank but not start. It starts fine when it's cold, but after driving around or making multiple stops, it will not start again. I have already changed the fuel pump relay


You can check codes on these without a scan tool ! surprised your mechanic doesn't know this ! Put the key in the ingition , turn it on then off , then on , then off then on again an leave it on . Then look at where the odometer is , will show P codes .
Flash Check Engine Light Codes Dodge Chrysler Jeep

Apr 21, 2017 | 2005 Chrysler Crossfire

2 Answers

Bought my car today has 138000 miles, all of a sudden engine light came on.. Car is running, shifting and driving fine. Oil , trans and coolant is good.. What is goingon? Help!!


Most likely a o2 sensor ,lean,or rich,a code reader will have to be put on the obd2 connector to read the codes to tell what the code is,if it is a lean indication ,o2 sensor,try replacing the fuel filter.

Feb 21, 2010 | 2002 Dodge Stratus

3 Answers

Serpentine belt diagram for a 3,3l dodge dynasty with ac


For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)
684ce70.jpg


Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

Nov 12, 2009 | 1991 Dodge Dynasty

1 Answer

2002 dodge caravan car dies


You need to get it scanned to see what those codes are. Autozone, Pep Boys and other big autoparts stores will usually scan for free. If codes don't tell you what is obviously wrong, get back to us with them & we'll help you out.

Sep 07, 2009 | 2002 Dodge Caravan

1 Answer

My 2002 dodge intrepid se with 2.7 engine wont start and i just had a brand new battery put in. all it does is crank and act like it wants to start but it wont.it is not the fuel pump. can you help me find...


thottle, cam or crank position sensor. is the engine light on, if so buy a OBDII code reader
comes with a book that tells you what codes are
costs about the same as taking it to a shop once
for a reading.

Apr 29, 2009 | 2002 Dodge Intrepid

1 Answer

2002 dodge ram truck


The check valve on the fuel line at the filter housing may be leaking back not maintaining pressure when the engine is not running.

Nov 08, 2008 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...