Question about 1996 Chevrolet Cavalier

Open Question

Need to know how to replace my 2-3 shift solenoid and diagram

I just replaced my fluid and filter on my 1996 chevy cavalier 2.4 engine i have the 4t40e transmission im gettin a 2-3 shift solenoid code still, how do i replace it? does anyone have a diagram of where its located and how to replace it?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7353 Answers

SOURCE: need to know where the 2-3 shift solenoid is and how to replace

Its in the pan, it will have a RED and YELLOW wire to it. I believe its on the side of the trans. under the side pan,

Posted on Nov 19, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 Cavalier Auto Trans left turn and stop


Trans fluid maybe low, and/or trans filter stopped-up. Drop pan...change filter...replace fluid.

Oct 03, 2012 | 1996 Chevrolet Cavalier

1 Answer

Po756 code and blincking od light 96 ford explore


P0756 FORD - Shift Solenoid 2 Performancexicon.jpghttp://engine-codes.com/p0756_ford.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 2 valve
- Shift solenoid 2 valve harness or connectors
- Shift solenoid 2 valve circuit is open or shorted
help.png Help with thisTech notes When the a transmission solenoid is stuck off, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.

Jul 06, 2012 | 1996 Ford Explorer

1 Answer

Got a code saying it is the shift solenoid, where is it at on a 1996 chevy 1/2 ton truck


It's inside the transmission, you can access it by dropping the pan. There's two shift solenoids they look the same, in fact they are the same you may want to replace them both they are not very expensive. There's a clip that holds them in place, carefully disconnect the wire, pull the clip out with a plier or small screwdriver. The solenoid will now pull out, put a couple drops of ATF on the "O-rings" of the new solenoid push it in put the clip back in and hook the wires back up. Put in a new filter, clean the pan out, install a new gasket and put in fresh fluid. It's a messy job, good luck.

Mar 14, 2010 | 1996 Chevrolet C/K 2500

2 Answers

Transmission promblem


Assuming you have an automatic transmission, I would check the transmission fluid level. If low, you need to identify where the fluid is leaking. Probable locations are transmission pan, or the cooler lines to the radiator.
If this has only begun to happen your transmission will probably be ok. If it has been happening for a while then you will probably be looking for a new transmission.
There is also one other possibility. If the check engine light is on and the codes read something in the area of "transmission control solenoid" or "shift solenoid" then you will need to have those replaced.

Mar 11, 2010 | 1996 Chevrolet K1500

2 Answers

Need to know where the 2-3 shift solenoid is and how to replace


Its in the pan, it will have a RED and YELLOW wire to it. I believe its on the side of the trans. under the side pan,

Nov 18, 2009 | 1996 Chevrolet Cavalier

1 Answer

Could i be getting the 2-3 shift solenoid code if i havent changed the fluid in it or filter i got it at 96,000 miles and now it has 146,000 miles.1996 cavalier 2.4


It's very possible. Crud builds up over time due to the heat in the transmission. A fluid flush and filter change is a good idea. You may end up doing it twice - automatic transmission fluid is a great detergent and new fluid may dislodge crud inside the transmission, which will fill the new filter and clog it. Swap it out a second time and you're golden.

Nov 17, 2009 | 1996 Chevrolet Cavalier

1 Answer

I need the engine wiring diagram for chevi


1996 Chevrolet Cavalier 2.2L SFI OHV 4cyl

This is a sample for an 1996 2.2L (VIN 4) engine schematic...
4773406.jpg

You can find more details and the Repair Guide about your model in autozone.com (free register). Select the Year, Make, Model and Engine for access.

I hope help you with this (remember rated this help) Good luck.

Oct 14, 2009 | 1996 Chevrolet Cavalier

1 Answer

Need help with 1996 Chevy Cavalier clutch problem


HI look under car in between transmission and engine look for sign of clear fluid like brake fluid.If you don't find any replace your clutch master cylinder.

Sep 26, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...