Question about Chevrolet Suburban 1500

1 Answer

Upper &lower balljoint replacement i need adiagram

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

I dont know what diagram you need. There is only one upper and lower on each side. Special tools are needed to replace the ball joints. Be sure to have everything you will need before you attempt to replace them. Be sure to get the front end aligned also .

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Upper lower balljoints replacement cost


This is a social web site

Everyone is at home & either asks
a question or answers one,there is no
info avail to guess at repair costs

Every place you go will be somewhat different

Usually the lower joints go on the expedition.

Jun 25, 2012 | 2003 Ford Expedition

2 Answers

Vibration on driver side I put new tires on an still vibrates at 50 mph an up


sounds like your balancing is off, have balance checked my tire dealer, or there is a bubble in the new tire, that something happens ever to new tires.

Jun 14, 2010 | 2006 Dodge Ram

1 Answer

How to change hub on four wheel drive 1997 blazer


You'll need to remove the caliper and rotor, remove the axleshaft nut, disconnect the ABS sensor wire. Remove the nut holding on the tierod, and disconnect the tierod end, a Pickle Fork will help remove the tierod end and seperating the ball joints. Remove the upper and lower balljoint cotter pins and nuts, seperate the upper and lower balljoints and remove the spindle. The hub is bolted to the spindle from the back with 3 bolts. You maybe need to have the hub pressed out.

May 20, 2010 | 1997 Chevrolet Blazer

1 Answer

2001 Sebring Sedan LX, 2.7l V-6, VIN Code U Lower balljoints: Can the front left and right lower ball joints be pressed into or out of the lower control arms on this vehicle? I'm being told by my mechanic...


Sounds odd... Rikkalan,

(but it appears AMAZON agrees with your mechanic)

Just go to ROCKAUTO and look up your parts...

If the entire arm needs to be replaced the separate ball-joint will not be listed...

Hope this helps!!
RockAuto Parts Catalog


2001 CHRYSLER SEBRING 2 4L L4 DOHC Ball Joint RockAuto

Mar 03, 2017 | 2001 Chrysler Sebring

2 Answers

How do i change upper and lower ball joints on 2000 ford ranger


They need to be pressed out then back in. Take it to a shop and save yourself a lot of headache

Feb 23, 2010 | 2000 Ford Ranger SuperCab

2 Answers

How to remove the upper ball joints on a 2001 Ford Explorer Sports track


You will need to jack up the vehicle and also support it by the lower control arms as well as the frame. Remove the front wheels and place them aside.unbolt the upper control arms.....and wedge a pickle fork between the upper balljoint and spindle to knock the upper balljoint loose. Then simply reinstall the new control arms....which have the balljoints in them already.install the balljoint nuts and cotter pins and then reinstall the wheels and lower truck back to the ground.Be sure to drive vehicle to an alignment shop asap so you do not start to eat up your tires. get back to me if you have any more questions...i'm here to help!!!!!

Nov 20, 2009 | 2001 Ford Explorer Sport Trac

1 Answer

How do i replace the upper and lower ball joints on my 2000 dodge durango


Dear Balljoint Replacer.....
This is a very labor intensive repair.The specialty tools that you need will be an air (or electric) die grinder, and an air hammer.If you already have these then GREAT!!! If not then be prepared to invest in a good $500 purchase for these tools.Once you get the vehicle up in the air and the wheels off then place jackstands underneath the frame and the lower control arms on both sides.Keep in mind to keep the jack stands underneath the lower control arms at all times because your suspension will be under load.Remove the brake calipers from both sides and swing them around and out of the way.....no need to break open the brake system....just swing the caliper and whole hose assy out of the way. Once tis is done its time to loosen and remove both upper and lower balljoint nuts...after that is performed then it's time to shock the spindle with a hammer to release the balljoints from the spindle.Your balljoints will then be ready to be removed.Now you have to take your grinder and score your rivets that hold your balljoints in on both the upper and lower so the top of the rivets are ground down to the control arm.Next take a punch and hammer the rivets in a downward movement to release the rivets and you can remove each balljoint like that.
The new balljoints install with nuts and bolts.Install is reverse of disassembly If you have any questions get back to me...HOPE I COULD HELP!!

Nov 17, 2009 | 2000 Dodge Durango

3 Answers

I have to replace the Upper & Lower Ball-Joints on my '03 5.9L V-8 Durango, do i have to also change the control arm or can i do only the ball joints?


You should be able to just replace the ball joints, should not need to replace the comntrol arms. Hope this helps

Jul 15, 2009 | 2003 Dodge Durango

1 Answer

Balljoints upper &lower


STOP.you will not be able to complete this repair.when changing balljoints on a s/d ford you need a special tool to install the new hub seals on the axles and then install axle with this tool as well.if the hub seals are damaged the hubs will not hold vaccuum and the auto 4x4 will not work.

Oct 04, 2008 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Noise under truck


Most of this problem it came from the dry balljoint, tie rod and broken suspension lower or upper side before you fix the lower suspension try to put grease your balljoint and tie rot or some parts that need to put some grease......

Jun 15, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...