Question about 1997 Ford F250 SuperCab

1 Answer

2001 Ford F250 Super Duty 4x4; the outer bearing for the right rear wheel axle will not slide into place. We are 100% sure it's the right bearing because we thought we had the wrong one and went to the Ford place and they said we had the right one. What would cause it not to fit it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Is it the same as the one you took off? thats what you need to verify. If it doesnt fit. Maybe the bearing surface is deformed, it would help tremendously if you told us some history, like, why you are replacing the bearing in the first place.

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2wd.how to replace front wheel bearing assembly


There are a number of videos...
For RWD front hubs. (F250 will just have larger bolts.)

How To Install Replace Front Wheel Bearing Hub Assembly 2004-08 Ford F150
For 4x4 front hubs.

Ford Super Duty hub bearing replacement Driver side

May 06, 2016 | 2005 Ford F 250 Super Duty

5 Answers

Tips to remove frozen wheel bearing


forget the torch idea as it will damage the axle
bearings appear hard but in fact cut readily with an angle grinder
cut at an angle and almost all the way in
get a cold chisel and hit the cut hard and the bearing will crack and be easy to pull off

Apr 14, 2015 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Replacing front axle seals and bearings


I replaced the left front bearings and seals a couple of months back. It is not a problem but be careful as you dismantle the system and of course the reassembly of same. Be sure to replace all bearings and seals as you probably don't want to do this job twice at the cost of parts. No special tricks and relatively easy job. 1601d678-bcb0-4cc6-af13-c2a57bf7d073.jpg

Jun 22, 2014 | 2001 Ford F-250 Super Duty

1 Answer

Rear axle seal leaking f250 6.0 4x4 2005


if you have a semi-floating axle ie an axle that the axle bearing is pressed on you have to remove the wheel, remove caliper if disc brakes and remove a retaining plate that holds the axle bearing in position. pull out the axle and the seal will be left in the axle housing. Replace and reverse procedures. If you have a full floating axle you have to remove the axle from the hub undo tha axle bearing nuts amnd if disc remove caliper or if drum pull the hub of the axle. The seal will be in the back of the hub as in a truck. you will need some mechanical knowledge so if you are unsure get a mechanic to advise you

Jan 22, 2013 | 2006 Ford F-250 Super Duty

1 Answer

I need help on my 2001 f250 for the front axle bearings and seal


Remove the wheel. Remove the two bolts at the caliper. Take a C clamp prefferbly a 6 inch type and compress the brake pads as far as they will go into the caliper.
remove the caliper
Now remove the two bolts to the calipers saddle that holds it in place
I think a 17 mm wrench will do
Now you can remove the rotor by removing the bearing cap and the rest is easy to figure out by punching out the bearing races as well as the seal
Clean thoroughly before installing the new parts

Apr 04, 2010 | 2001 Ford F250 Super Duty Super Cab

1 Answer

I have a ford f250 diesel 4x4 and the front axle is makeing a grinding noise any one know what that is


It sounds like you may have a wheel hub bearing going bad . Jack up front of truck and spin each tire and listen for any noise it should be quite and spinfree if you find it's bad you must replace the whole hub you can't just repair the bearing this is a common problem on the f250

Jan 16, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

A grinding noise in the front end of my 2002 f250 super duty and its not the brakes


If it is a 2 wheel drive, it is probably your wheel bearings. If it a four wheel drive, it could be the front differential, the joints on the axle shafts, the locking hubs, or the wheel bearings. On the four wheel drive, crawl under the vehicle and grab the axle shafts and see where the excess movement is. Also try grabbing the tires and see if there is any movement. There shouldn't be any movement while the wheels are on the ground.

Mar 20, 2009 | 2002 Ford F250 Super Duty SuperCab

Not finding what you are looking for?
1997 Ford F250 SuperCab Logo

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...