Question about 1997 GMC Sierra

1 Answer

I need to replace the #4 fuel injector. Please

I (may) need to replace the #4 fuel injector. Please describe procedure and advise of anything to watch out for.Plus, any advise for easy tests to verify that this is the problem? It is missing on #4 according to garage that checked codes.

Posted by on

  • kdewald Nov 18, 2009

    Hi, Thanks,

    it is the 5.7 vortec and evidently the injector assemglies are all held by a bracket and have a squeeze connector at the end of a tube connected to the injector itself.

    -Keith


  • kdewald Nov 19, 2009

    Thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 6,826 Answers

I do not know witch engine you have,but ,I imagine shop checked the coil,wire ,and plug,,look for a valve,with a valve core in it,and depress the core to relieve the fuel pressure before you start.There will be bolts in the fuel rail,holding the fuel rail to the intake.Remove these bolts,all of them.To remove the one injector,you need to remove all,at the same time,Do not remove the injectors from the rail.Pry gently between the injector,and the intake with a pry bar,and twist and turn on the injector to remove.When you go to replace the one,just remove the c-clip and remove from the rail,that you have removed already.Install in opposite,replace all the o rings on all the injectors,between the intake and injector,and use vasoline on the outside of the o ring,to help with the reinstall.You will have to twist and puss on the injectors to put them back in the intake.

Posted on Nov 18, 2009

  • 1 more comment 
  • Ronny Bennett Sr.
    Ronny Bennett Sr. Nov 18, 2009

    If it is a 4.3,vortec,then he injectors will come out different ly by just sqeezing the plastic connector together,and pulling,and all injectors would not have too come out.

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Nov 18, 2009

    Just sqeeze the connector and pull it out,and replace it,but I would still you vasoline to lube the o ring on the new one.

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Nov 18, 2009

    Purchase the injector,and you will see how it connects to the spider.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

07 chevy cobalt 2.2L no injectors pulse!the fuel pump works fine!when I spray starter fluid inside the throttle body & than the want to start...NEED HELP PLEASE!!! LIKE A.S.A.P


Hi,

I would check n replace the fuel filter if needed. Also, it could be one of the spark plugs. Was it running before? Can you think of anything that happened or changed recently?

Aug 08, 2016 | Cars & Trucks

6 Answers

1997 Nissan Sentra 4 cyl. Won't Start


That means bad injectors, or defective fuel pump, you probably need to replace the fuel pump.

Oct 18, 2008 | 1997 Nissan Sentra

1 Answer

What do i check too fix injector circuit 4 on cavalier 99


OBD-II Trouble Code: P0201 Cylinder 1 Injector Circuit ...

www.obd-codes.com/p0201
The symptoms for this code will likely be a misfire and a rough running ... First, using a DVOM check the resistance of the injector. ... This is for a 2003 Saab 9-3 with fault code P0201 (Cylinder 1 Injector Circuit ... If you still need help regarding the P0201 trouble code, please post your question in our FREE car repair forums.

Stuck Open Fuel Injector (how to fix) - YouTube

? 8:25
https://www.youtube.com/watch?v=jsl531-6q-A
Sep 13, 2011 - Uploaded by ScannerDanner
2001 Dodge Grand Caravan 3.3 with a #5 injector control wire shorted to ground. ... (Injector control voltage ...

2002 Chrysler 3.8 Liter Injector Code Fix p0204 - YouTube

? 4:13
https://www.youtube.com/watch?v=GX3kQloqIBw
Mar 31, 2013 - Uploaded by Mickey Smith
(P0204 Injector Circuit - Open Cylinder) This will show you what i found wrong. Your number 4 injector ...Missing: cavalier

1999 Chevy Cavalier Error code PO200 and PO200P (pending ...

forums.automotive.com > ... > General Auto Repair


Jan 25, 2016 | Cars & Trucks

1 Answer

How to remove and clean suzuki Baldwin 2001 fuel injector and where it is installed in engine please show me.


GSX-R600 wont start!! (DIY fuel Injector Cleaning ) - YouTube

? 4:45
https://www.youtube.com/watch?v=ZVfcFCCyXVo
Jul 24, 2011 - Uploaded by LaDarryl Hollingsworth
I just put in a new motor but it seems a if there's no fuel leaving the injec... ... Remove your fuel pump and replace the screen. Better yet , buy a ...

Nov 21, 2015 | Suzuki Cars & Trucks

1 Answer

2002. Why won't it start?


Did you check voltage and ground for the other injectors to see what your losing, voltage or ground? Do an ohms test on all fuel injectors, see if reading is close to the same? I'm just wondering if you have a faulty fuel injector? The ohms reading should be close to the same for all fuel injectors. #4 may have a problem? Did you try disconnecting #4 injector for a second, to see if others would start working?
Can you check for applicable trouble codes? To check codes, yourself, at the least, you need an obd2 code reader.
Are you missing anything else, engine cranking you have good spark at all the spark plugs? You used a gage and you have proper fuel pressure, engine cranking?

Jul 07, 2015 | Chevrolet Impala Cars & Trucks

3 Answers

Po 172 bank1 rich


check the injector (first injector from cam belt side). you will also need live data software running with the engine running. just to make sure there is nothing ells causing the problem..

Jan 12, 2014 | 2007 Mercedes-Benz ML350

1 Answer

I kept smelling fuel. I went and got the fuel injector replaced however I still ocassionally smell fuel. A friend of mine thinks I have a leak also because I just filled up, I've only driven 60 miles...


It sure sounds like you have a fuel leak some where, I'm surprized the shop that replaced the injector didn't look for that. I think you need to have it looked at by a qualified Tech ASAP, as there's a REAL fire danger.

May 09, 2011 | 2004 Chevrolet Cavalier

1 Answer

Replace fuel injector


The procedure to replace the fuel injector in Buick Lesabre Is as follows:-- 1) you will require a ordinary flat screwdriver, a needle nose pliers, a 10 mm socket, 6" extension and 1/4" ratchet. 2) First of all take the engine cover out then pinch the fuel rail connecting fittings at the base and lift off the two hoses. Note:-- Do this when your engine is cold. 3) Then bleed off the pressure in the fuel rail first. Take care you don't damage the fuel rail while bleeding the fuel pressure because a new one will cost over $ 200. 4) Loosen and remove the four nuts holding down the fuel rail. Disconnect all six electrical connectors to each injector. 5) Carefully lift up the fuel rail. Pry off the clip holding the top of the injector to the fuel rail. Pull the injector out of the fuel rail and then out of the intake manifold. 6) Install the new injectors and replace top and bottom o-rings. Reassemble and check for any fuel leaks. Thanks.

May 23, 2010 | 1991 Buick LeSabre

1 Answer

2001 mazda tribute fuel injector diagram. #4 cylinder missing so I need to replace plug, injector(this is where I think the problem is-had the cleaned with drip procedure and got better, now worse again,...


if you have a cylinder 4 miss fire it is more likely to be the coil and not the injector. I have replaced a ton of coils on these for miss fires but don't think I've done an injector for this problem yet.

Jul 13, 2009 | Mazda Tribute Cars & Trucks

Not finding what you are looking for?
1997 GMC Sierra Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...